goobay 51270 Mains and Surge Protection Switch User Manual
- June 5, 2024
- goobay
Table of Contents
51270
User Manual
Mains and surge protection switch
Safety instructions
The user manual is part of the product and contains important information for correct use.
-
Read the user manual completely and carefully before use. The user manual must be available for uncertainties and passing the product.
-
Keep this user manual. Voltage-free only when the plug is pulled out.
-
In case of emergency, after use, and during thunderstorms, pull the mains plug directly out of the socket at the plug housing.
-
Do not open the housing.
-
Do not modify products and accessories.
-
Do not short-circuit connectors and circuits.
A defective device must not be put into operation but must be secured against unintentional further use. -
Only use the product, product parts, and accessories if they are in perfect condition.
-
Avoid extreme loads such as heat and cold, wetness and direct sunlight, microwaves as well as vibrations and mechanical pressure.
-
In case of questions, defects, mechanical damage, malfunctions, and other problems that cannot be solved by the accompanying documentation, contact the dealer or manufacturer.
-
Installation, disassembly, maintenance, and repair work may only be carried out by qualified electrical specialists.
-
Compare technical data of a product, power supply, and peripheral devices. They must be identical.
-
Use only in dry conditions.
-
Do not plug in one after the other.
-
Never touch the power plug with wet hands.
-
Do not operate covered.
-
Do not operate in potentially explosive atmospheres.
Not suitable for children. The product is not a toy! -
Secure packaging, small parts, and insulating material against accidental use.
Description and function
2.1 Product
This product is an overvoltage protection switch that protects your devices
against mains overvoltages such as lightning.
○ Operation LED lights up as soon as voltage is applied
2.2 Scope of delivery
Mains and surge protection switch, User Manual
2.3 Operating Elements
1 | Protective contact socket |
---|---|
2 | Protective contact plug |
3 | Housing |
4 | Overvoltage protection indicator (operation LED) |
2.4 Specifications
Article number | 51270 |
---|---|
Connections | 1x Protective contact socket (Typ F, CEE 7/3) |
1x Safety power plug (Type F, CEE7/4)
Input voltage| 250 V 50 Hz
Max. permissible load| 16 A, 3500 W
Overvoltage protection| T3, Uc 255 V , 50 Hz
Uoc 6.0 kV (L-N)/3.0 kV (L-PE)/5.0 kV (N-PE)
Up 2.6 kV (L-N) / 2.0 kV (L/N-PE)
Protection class Protection level| I
IP20
Dimensions (LxWxH) [mm]| 77 x 76 x 51
Weight (g)| 76
Intended use
We do not permit using the device in other ways like described in chapter
“Description and Function” or in the “Safety Instructions”. Use the product
only in dry interior rooms. Not attending to these regulations and safety
instructions might cause fatal accidents, injuries, and damages to persons and
property.
Preparation
- Check the scope of delivery for completeness and integrity.
- Compare the specifications of all used devices and ensure compatibility.
Connection and operation
- Connect your household appliances to the surge protector.
- Connect the surge protection switch to an easily accessible grounded socket.
The overvoltage protection is active when the overvoltage indicator lights up.
This lights up as soon as voltage is present.
Maintenance, Care, Storage, and Transportation
The product is maintenance-free.
NOTICE!
Material damage
- Disconnect the power plug from the socket before each cleaning.
- Only use a dry and soft cloth for cleaning.
- Do not use detergents or chemicals.
- Store the product out of the reach of children and in a dry and dust-protected ambiance when not in use.
- Store cool and dry.
- Keep and use the original packaging for transport.
Disposal instructions
7.1 Product
According to the European WEEE directive, electrical and electronic equipment must not be disposed of with consumer waste. Its components must be recycled or disposed of apart from each other. Otherwise contaminative and hazardous substances can damage health and pollute the environment.
As a consumer, you are committed by law to dispose of electrical and
electronic devices to the producer, the dealer, or public collecting points at
the end of the device’s lifetime for free. Particulars are regulated in
national rights. The symbol on the product, in the user manual, or on the
packaging alludes to these terms. With this kind of waste separation,
application, and waste disposal of used devices you achieve an important share
of environmental protection.
WEEE No: 82898622
7.2 Packaging
****Packaging can be disposed of free of charge at the suitable collection
points – paper belongs in paper bins, plastics belong in yellow sacks and
glass belongs in used glass bins.
DE4535302615620
EU Declaration of conformity
With the CE sign Goobay®, a registered trademark of the Wentronic GmbH ensures, that the product is conformed to the basic European standards and directives.
Symbols used
For indoor use only| IEC 60417- 5957|
---|---|---
Alternating current| IEC 60417- 5032|
Recycling| ISO 7001 – PI PF 066| ****
Protective earth; protective ground (Class I equipment)| IEC 60417- 5019|
REV2021-07-19
V1.0cl
Subject to change without notice.
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>