V2145
Quick Start Guide

V2145 X80 Pro Smartphone

Please read this Quick Start Guide before using your phone, and keep it for future reference.
Welcome to Vivo
This Quick Start Guide tells you how t> set up your phone and use Its. key features. For more detailed instructions, tum on your phone, then 90 to Settings > About phone > Customer service > Manual. You can for leam more useful information on who’s the official name.
For legal information, go to Settings > About phone >» Legal information.
the FCC ID of this phone, please go to Settings > About phone > ES, The features and images shown in this guide are for reference only,
They may differ from the actual product.
It is recommended to charge the device for af least 30 manutes before turning it on for the first time.

Special Instructions

* Ambient Light Sensor & Proximity Sensor*
The ambient light sensor and proximity sensor of this device is hidden under the receiver. To ensure the sensors function well, please keep them away from any dust, grease
‘or fight-proof film. Using o third-party screen protector may ‘trigger alerts for blocked sensors of cause the locked screen Noniresponsive to incoming calls, 50 you need to cut the film to expose the sensors or get a new screen protector at the Vivo service center.
Ultrasonic fingerprint sensor**
A third-party screen protector might affect fingerprint recognition. Ensure that you use a vivo official screen protector with a customized design for the fingerprint sensor,

To ensure good photo results, please do not cover the camera, flash, and

laser focusing sensor when applying the screen protector.
*Infrared blaster
The infrared blaster is located on the top of the mobile phone, near the secondary microphone. It is recommended to use the original phone case. tf you are using a third-party
phone case, please avoid blocking the infrared blaster to ensure the infrared remote control works properly.
Optimum operating temperature & OC to 38°C and the optimum storage temperature ie -20’C to 48°C. Extreme heat or cold may damage your device or accessories.

Appearance

1. Infrared blaster
2. Secondary microphone
3. Ambient light sensor & tif Proximity sensor (hidden hole)
4. Volume button
5. Power button
6. ultrasonic fingerprint sensor wire (embedded in the screen)
7.USB port
8. Main microphone| 9. SIM card tray
10. SIM card eject hole
11. Speaker
12. Front camera
13. Receiver & Speaker
14. Rear camera
15. Laser focusing sensor
16. Flash
---|---

Tips: Insert/remove your SIM card using the provided eject tool. To avoid damaging the device, do NOT remove the back cover. This phone supports standard
Nano card. Please go to your local carrier shops to change to a standard Nano card.

Product Standard Accessories

Cell phone x 1
Eject tool x 1
Charger x 1
Warranty card x 1
USB cable x 1
Quick start guide x 1
Phone case x 1
Headset x 1
Head: 0.91 Wiking
Body-worn: 0.51 W/kg (15mm distance )
Hotspot: 0.69 Wikg (10mm distance )
FCC statement
This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the vivo Mobile Communication Co., Ltd. could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  Consult the dealer or an experienced radio/TV technician for help.

SAR statement

This device meets the government’s requirements for exposure lo radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S, government.
The SAR lima sat by the FCC is 1.6Wikg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 15mm from the body. RF exposure compliance with any body-wom accessory that contains metal was not tested and certified, and use of such body-wom accessories should be avoided. Accessory available in the market and must be used to keep use distance 15mm from EUT to body-worn operation. When using the wireless power sharing function, this device should be operated with a minimum distance of 20cm between the dewca and your body. Keep the device away from your body to meet the distance requirement,

Version: V1.0 5310086 FXXX

Documents / Resources

| VIVO V2145 X80 Pro Smartphone [pdf] User Guide
V2145, 2AUCY-V2145, 2AUCYV2145, V2145 X80 Pro Smartphone, X80 Pro, Smartphone, X80 Pro Smartphone, V2145 Smartphone
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>