KODAK PS001 Power Stand User Manual

KODAK Power Stand / for Smartphone
PS001
User Manual

|
---|---

User Manual For KODAK Power Stand / for Smartphone PS001

HANDLING THE KODAK POWER STAND

Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects into this product. Do not place any foreign objects on to the charging pad. See that there is no excess debris on the silicone charging pad before starting charging.

AVOIDING WATER AND WET LOCATIONS

Do not use this product in rain or other wet locations. In case this product gets wet, unplug all cables, before cleaning, and allow it to dry thoroughly before turning it on again. Do not attempt to dry this product with an external heat source, such as microwave oven or hairdryer. Product that has been damaged as a result of exposure to liquids is not serviceable. Do not charge your phone if it is wet. This might cause damage to your smartphone or the Power Stand.

REPAIRING OR MODIFYING KODAK POWER STAND

Never attempt to repair or modify this product by yourself, disassembling this product, including the removal of external screws, may cause damage that is not covered under the warranty. This voids warranty and releases the manufacturer from liability for damage. Contact authorized dealer/distributor for assistance or repair.

Product Requirements:

• Qi-certified smartphones or those with an external Qi receiver case
• Wireless charging pad requires a power supply with minimum of 10 W (5 V / 2 A)
• USB-C cable must support a minimum of 5 V / 2 A (included)
• USB wall socket must support 5 V / 2 A

USING CONNECTORS OR PORTS

Never force a connector into a port. Check for any possible obstructions on the port. If the connector and port do not join with reasonable ease, they probably do not match. Make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port. Forcing the cable to a wrong port may cause severe damage to the product.

OPERATING INSTRUCTIONS:

1. See that there is no excess debris on the silicone charging pad.
2. Adjust the Kodak Power Stand to the wanted angle and height
3. Plug the USB-C cable into the Power Stand
4. Plug USB to a wall socket (5V / A2)
5. Place your smartphone on the phone holder and it will start charging automatically.
6. Fold up for easy transportation after use

Specifications:
Adjustable height 15cm – 26cm / 5.9inch –10.2inch
Double coil 10W charging
Horizontal and vertical charging
Foldable for easy portability
Compatible with all smartphones that support
QI charging
Requires 18W Quick Charge 3.0 wall charger to charge up to 10W ( not included)

WALL-MOUNTED USB POWER SUPPLY WITH INSUFFICIENT POWER WILL RESULT IN VERY

SLOW CHARGING TIMES

Note This product is not for children under 3 years old. Avoid extreme temperatures, this may cause the device, or your smartphone to overheat. Do not operate if the product or your smartphone are wet Do not place any foreign objects on to the charging pad This device is only to charge smartphones wit Qi (wireless charging function). Do not try to charge any other devices with this product If your smartphone starts overheating or is showing any other signs of malfunction during charging, stop charging immediately.

PRODUCT STRUCTURE:

a. Charging pad
b. Angle adjustment
c. Height adjustment
d. Idicator light
e. Smartphone holder
f. Angle adjustment
h. USB-C cable port

WARRANTY INFORMATION AND PERIOD:

EU 24 months. Other countries 12 months from date of purchase.
This product is manufactured by Eye Caramba
LTD, Tehtaankatu 19 C 16, 00170 Helsinki, Finland.
The Kodak trademark, logo, and trade dress are used under license from Kodak For customer support: info@kodakringlight.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>