ERMENRICH NS200 Night Vision Binoculars User Manual
- June 5, 2024
- ERMENRICH
Table of Contents
Ermenrich NS200
Night Vision Binoculars
User Manual
1. Focusing wheel
2. USB and microSD slots
3. IR UP button
4. IR DOWN button
5. POWER button
6. Strap hooks| 7. IR LEDs
8. the MENU button
9. MODE button
10. SHOT button
11. Battery compartment
12. View area
---|---
Ermenrich NS200 Night Vision Binoculars
Never, under any circumstances, look directly at the Sun, another bright source of light, or at a laser through this device, as it may cause PERMANENT RETINAL DAMAGE and may lead to BLINDNESS.
Specifications
| Zoom, x | 1–5 |
|---|---|
| Objective lens diameter, mm | 25 |
| Field of view, ° | 10 |
| Focal ratio | f/1.2 |
| Observation distance, m | 250–300 (in complete darkness), 3~∞ (in weak light) |
| Operating temperature range, °C / °F | −20…+60 (operating), −30…+70 (storage) / |
−4…+140 (operating)
IR-illumination| IR LEDs 3W (7 brightness levels)
IR wavelength, nm| 850
Power supply| 6 alkaline AA batteries
Storage| class 10, microSD up to 128GB
Image format and resolution| JPG; 10M/8M/5M/3M/VGA
Video format and resolution| AVI; 1920x1080px@30fps, 1280x720px@30fps
Cleaning and precautions
Do not expose the device to direct sunlight – that could cause a fire!
Do not scratch or touch the optical surfaces with your fingers.
Remove the batteries before cleaning the device! Use only dry, lint-free
cloths to wipe the outer parts of the device. Do not use cleaning fluid to
avoid electronic damage. avoid scratching the lenses, only use a soft cloth,
and do not press too hard. Keep the device away from dust and water. Keep the
device in a bag or a box. Remove the batteries from the device if it has not
been used for a long time.
Battery safety instructions
Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time; take care not to mix old and new ones or batteries of different types. Clean the battery contacts and also those of the device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid the risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>