NIGHTSTICK TAC-500 Multi-Function Tactical Rechargeable Flashlight Instruction Manual
- June 5, 2024
- NIGHTSTICK
Table of Contents
Included in the box
Instruction Manual
TAC-500/510/550/560
US PATENT 9,713,217
WARNINGS
- Lithium-ion batteries must be used and charged properly. Improper use can result in serious injury, fi re, or death.
- NOT FOR USE IN HAZARDOUS LOCATIONS. Do not use this product in explosive atmospheres, near flammable liquids, or where explosion-proof or intrinsically safe lighting is required.
- DO NOT use this product in the proximity of vehicles or equipment when there is a risk of flammable liquids coming into contact with the flashlight.
- Light can become hot while on. To prevent damage DO NOT cover or place next to any potentially flammable materials while in use.
- Do not leave the battery in direct sunlight or use or store the battery inside cars in hot weather.
- Do not expose the battery to water or salt water, or allow the battery to get wet.
- Do not store the battery with metallic objects that may cause a short circuit.
- Immediately discontinue use of the battery if the battery emits an unusual smell, feels hot, changes color, changes shape, or appears abnormal in any way.
- Keep out of the reach of children.
INITIAL USE
Fully charge the TAC before the first use, or if the battery is new or has been unused for several months. The maximum charge time required is approximately 4 hours.
DAILY USE
- Use only the supplied Nightstick charger, battery, and AC or DC adapter. For best performance, charge the TAC when the flashlight beam starts to dim.
- Connect the AC power adapter to the charger. The LED indicator will not be illuminated at this point.
- With the flashlight facing forward, slide the TAC into the charger until the contacts snap into place.
- The LED indicator changes to constant red indicating the TAC is properly inserted into the charger and is in fact charging. The LED indicator remains red until the battery is fully charged. At full charge, the LED indicator turns green.
- The total time to full charge the TAC varies depending on the remaining charge in the battery pack.
- To confirm a full charge, keep the TAC in the charger and turn it on. The LED indicator will change to red. Turn off the TAC. If the TAC is fully charged, the LED indicator will turn green. If not, it remains red until the charge is completed and the LED indicator turns green. The TAC will now be fully charged.
OPERATION
The TAC has five light modes: momentary flashlight, full brightness
flashlight, medium brightness flashlight, low brightness flashlight, and
strobe. The TAC has a single tail switch providing access to all modes.
MOMENTARY FLASHLIGHT MODE
Lightly press the tail switch for momentary operation. Release the switch to
turn the light off.
CONSTANT-ON
Press the tail switch until it clicks and then release for constant-on in
high-brightness mode.
Press and release the tail switch again to turn the light off.
SELECT BRIGHTNESS LEVEL
Press and hold down the tail switch. The light will cycle from high to medium
to low and then back up again at a rate of approximately one mode per second.
The light will continue to cycle up and down through the various modes as long
as the tail switch is held down. When the desired brightness level is reached,
simply release the tail switch, and the light will remain in that brightness
mode. Pressing and holding the tail switch again will cause the light to cycle
from whatever mode it is currently in. Press and release the tail switch to
turn the light off.
STROBE FUNCTION
To activate the strobe, rapidly double click the tail switch. The strobe can
be activated from any mode including off. Press and release the body switch to
turn the strobe off.
Strobe Warning
Exposure to strobing lights may cause dizziness, disorientation, and nausea. A
very small percentage of people suffer from photosensitive epilepsy and may
experience seizures or blackouts triggered by strobing lights. For more
information from the EPILEPSY FOUNDATION about photosensitivity and seizures,
please visit www.epilepsy.com. Anyone who has had
symptoms linked to this condition should consult a doctor before using this
product.
CR-123 BATTERY CARRIER
The CR123 battery carrier converts the
TAC from rechargeable Lithium-ion to nonrechargeable Lithium battery
operation.
Load two CR-123 Lithium batteries with the positive terminals pointing in the
direction of the arrow.
NOTE: The flashlight cannot be charged with the CR-123 CARRIER installed.
LIMITED LIFETIME WARRANTY
Bayco Products, Inc. warrants this product to be free from defects in
workmanship and materials for the original purchaser’s lifetime. The Limited
Lifetime Warranty includes LEDs, housing, and lenses. Rechargeable batteries,
chargers, switches, electronics, and included accessories are warranted for a
period of two years with proof of purchase. Normal wear and failures which are
caused by accidents, misuse, abuse, faulty installation, and lightning damage
are excluded.
We will repair or replace this product should we determine it to be defective.
This is the only warranty, expressed or implied, including any warranty of
merchantability or fitness for a particular purpose.
For a complete copy of the warranty, go to www.baycoproducts.com/bayco-
product-support/warranties. Retain your receipt for proof of purchase.
Bayco Products, Inc.
• 640 South Sanden Blvd.
• Wylie, TX 75098
• 1-800-233-2155
• 1-469-326-9400
• www.nightstick.com INS-T500-21
References
- Bayco Products, Inc. (BPI)
- Epilepsy Foundation #1 trusted site for epilepsy and seizure news
- Nightstick Professional Lighting Products
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>