SALTO PL-SAL-EMXXX XS4 Original+ Smart Lock Installation Guide

June 5, 2024
SALTO

SALTO PL-SAL-EMXXX XS4 Original+ Smart Lock

Installation guide XS4 Original+ Ai6xx…

Select handing

Installation

Battery Change

DORM LOCK

Wireless

Installation guide XS4 One+ Ai9xx…

Select handing

Installation

DORM LOCK / KEY OVERRIDE

WIRELESS

SALTO XS4 Original+ / XS4 One+ Additional Information

The XS4 Original+ / XS4 One+ product is a universal compatible state-of-the- art electronic escutcheon that brings the smart lock to a new technology level, combining the latest innovation in security, connectivity, and design into a battery-operated access control device.

Signalling

ELECTRICAL FEATURES

OPERATING CONDITIONS

 | Min.| Max.
Temperature (OUTSIDE)| -35ºC| 60ºC
Temperature (INSIDE)| With LR03 Batteries| -5ºC| 50ºC
With FR03 batteries| -35ºC| 60ºC
Humidity|  | 0ºC| 95% (Non-Condensing)

SALTO BLUEnet FEATURES

SALTO BLUEnet FEATURES

Frecuency Range| 2400-2483.5 MHz
Standard| Bluetooth 5.2 Compliant
Output TX power| +6 dBm
Indoor Range| 10-15m *

  • Depending upon installed environment. To ensure correct operation, do not install the device near a metallic surface.

RFID CHARACTERISTICS

Central Frecuency| 13,56MHz

CONFIGURATION

Compliance

PRODUCTS DESCRIPTION

PRODUCT TECHNOLOGY SOFTWARE


COMMERCIAL NAME

| ****


MODEL

| ****

RFID

13.56 MHz

Output max. power

| BLUETOOTH SMART 2400–2483.5

MHz

Output max. power

| IEEE802.15.4 2400–2483.5

MHz

Output max. power

| ****


CONTROL

| ****


READER

| ****


BLE MODULE

| ****


RF2 MODULE

| ****


MOTOR

| SoC
FUS| BLE

Stack





XS4 Original E0102 (A)

| W09| +25 dBm|  |  | 0037| 0132|  |  |  |  |
W0B| +25 dBm| +8 dBm|  | 0037| 0132| 0136|  |  |  |
W0J| +25 dBm| +8 dBm|  | 0037| 0133| 0136|  |  |  |
W0S| +25 dBm| +2.8 dBm|  | 0126| 0132| –|  |  |  |
W09W| +25 dBm|  | +5 dBm| 0016/0061/0095| 0132|  | 0038/0099|  |  |
W0BW| +25 dBm| +8 dBm| +5 dBm| 0016/0095| 0132/0140| 0136| 0038/0099|  |  |
W0JW| +25 dBm| +8 dBm| +5 dBm| 0016| 0133| 0136| 0038|  |  |
W08| +20 dBm|  |  | 0037| 0082|  |  |  |  |
W08W| +20 dBm|  | +5 dBm| 0016/0061| 0082|  | 0038|  |  |


XS4 Original with Keypad E1215 (A)

| W0BK| +25 dBm| +8 dBm|  | 0016/0095| 0132| 0136|  |  |  |
W0JK| +25 dBm| +8 dBm|  | 0016| 0133| 0136|  |  |  |
W0SK| +25 dBm| +2.8 dBm|  | 0126| 0132| –|  |  |  |
W0BWK| +25 dBm| +8 dBm| +5 dBm| 0016/0095| 0132/0140| 0136| 0038/0099|  |  |
W0JWK| +25 dBm| +8 dBm| +5 dBm| 0016| 0133| 0136| 0038|  |  |
XS4 Original+ E2131 (A)| W40M| +25 dBm| +6 dBm|  | 0174|  |  |  | 0179| 0186| 0187
W60M| +25 dBm| +6 dBm|  | 0174|  |  |  | 0179| 0186| 0187
XS4 One+ E2131 (A)| W80M| +25 dBm| +6 dBm|  | 0174|  |  |  | 0179| 0186| 0187
W60M| +25 dBm| +6 dBm|  | 0174|  |  |  | 0179| 0186| 0187
XS4 Original

i-Button E0127 (B)

| ****

W02

|  |  |  | 0023/0024/

0025

|  |  |  |  |  |

EU DECLARATION OF CONFORMITY
EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS). You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate

Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
We, SALTO Systems, S.L., hereby declare that the equipment bearing the model number specified above was tested conforming to the applicable FCC Rules. Responsible Party – U.S. Contact Information
Salto Systems Inc. USA. 1780 Corporate Drive, Suite 400. Norcross, GA. 30093. l.saldana@saltosystems.com
ISED COMPLIANCE STATEMENT (2)
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. https://www.saltosystems.com/certificate

Legend:

  Remarks:
(1)  FCC Not applicable for models W08, W08W
(2)  ISED Not applicable for models W08, W08W
(3)  MIC Not applicable for W08, W08W, W40M, W60M, W80M, W02
(4)  IMDA Not applicable for W08, W08W, W40M, W60M, W80M, W02
(5)  NCC Not applicable for models W09, W0S, W09W, W0BW, W0JW, W08,

W08W, W0SK, W0BWK, W0JWK, W40M, W60M,

W80M, W02

Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain.
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.
SALTO SYSTEMS S.L. www.saltosystems.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals