Xblitz Z3 Dashcam Full HD Vehicle Recorder User Manual

[Z3]
USER’S MANUAL

Thank you for purchasing our product – we hope it will satisfy your expectations. This product is a dashboard camera, powered by a 12V/24V socket, meant for use in a car, designed to record footage from the road taken by the vehicle. It is made of components and elements of the highest quality. Before using the product, please read the user’s manual carefully.

PACKAGE CONTENTS

1. Dashboard camera
2. Memory card reader
3. Charger
4. Holder
5. USB cable
6. User’s manual

DASHCAM DESCRIPTION

1. Lens
2. Speaker
3. Holder mounting point
4. POWER button
5. Microphone
6. LED diode
7. Display screen| 8. MODE button
9. UP button
10. DOWN button
11. the MENU button
12. microSD card slot
13. miniUSB port
14. RESET button
---|---

BUTTONS DESCRIPTION

POWER| Hold for 3 seconds to turn the camera on or off.
In VIDEO mode, a short press starts and stops the recording. In PHOTO mode, a short press takes a photo.
In PLAY VIDEO mode, a short press serves as a play/pause button.
In Menu, a short press confirms your choice.
---|---
MODE| A short press outside of the menu (when the camera isn’t recording), switches between VIDEO/PHOTO/VIDEO PLAY modes. When the video is being recorded, a short press protects the current recording from being overwritten later.
UP| In MENU and VIDEO PLAY mode, the button is used to navigate through options.
DOWN| In MENU and VIDEO PLAY mode, the button is used to navigate through options.
In VIDEO mode, a short press turns the parking mode on and off.
MENU| Pressing the button opens a contextual menu (unless the camera is recording). Pressing it again takes you back to the general menu.
RESET| Pressing the button resets the camera and restores default settings.

BEFORE USE

1. Using brand microSD memory cards (from 8GB to 32GB of memory) with speed class 10 is recommended.
2. Before putting the card into the camera, it needs to be formatted to the FAT32 file system on your computer, and then again in your camera.
3. The memory card should be installed when the device is turned off, otherwise, you can damage the card and the device. The same is true for taking out the memory card.
4. A fully charged battery lets the camera record video with no power supply for maximally 5 minutes. The battery’s primary purpose is to ensure that the device’s settings won’t be reset due to lack of power.
5. When the memory card gets full, the oldest unprotected recordings will be overwritten.
6. It is recommended that you use the device’s functions as intended. Do not use MOTION DETECTION and PARKING MODE when driving, as it can cause the device to turn on and off by itself, e.g. when you stop at a crossroads.

It is recommended to set the G-SENSOR option to a minimum to avoid protecting unimportant files and loss of space on your memory card. The memory card has to be formatted to the FAT32 file system, first on a computer and then in the camera.

CAMERA MOUNTING MANUAL

1. Pick a spot to place your camera. It is best to place your camera in a place that makes as much space in front of the vehicle as possible visible on the display screen. Make sure, that the camera will not obscure the driver’s line of sight when driving.
2. Mount the holder on the windshield and then place the camera in the holder.
3. Place the USB cable as shown in the picture above.
4. Connect the mini-USB plug to the camera.
5. Connect the charger to the 12V lighter socket.

OPERATING THE DEVICE

1. Mount the camera and connect it to the power supply.

2. Put in a microSD memory card, formatted to the FAT32 file system. WARNING the card should be put in and taken out only when the device is turned off

3. Set the:
   a. time and date,
   b. loop recording (set the time of recordings). If you turn loop recording off, files will not be overwritten,
   c. set the highest resolution available,
   d. set the G-Sensor to the lowest sensitivity available, so that the camera doesn’t save unnecessary video files when you drive on uneven roads.

4. Make sure that the MOTION DETECTION and PARKING MODE are turned off.
   If they remain turned on when you’re driving, they will interfere with your recording. Turning parking mode on is recommended only when you leave your vehicle parked. PARKING MODE can be quickly turned on and off in recording mode by pressing and holding the DOWN button.

5. The camera will start recording automatically when you turn the engine on (unless your car has a constant power supply in its lighter socket).

MAIN FEATURES OF THE CAMERA

1. Camera mode
   The camera has 3 modes of operation. Recording mode: the camera records video. Photo mode: the camera takes pictures. Video Play mode: browsing the footage recorded by the camera.

2. Loop recording
   The camera divides the recordings into files of the length of your choice. When the memory card is full, the oldest recording will be overwritten.

3. Resolution
   The camera can record in many resolutions. The higher the resolution, the better the quality of recordings, at the cost of more space on the memory card being taken.
   It is reccomended that you use the highest resolution available.

4. G-Sensor
   Gravity sensor. When the sensor is turned on and your car is hit, the recording from the event will be protected from overwriting. Using the lowest sensitivity setting is recommended, as at higher settings the sensor can trigger when you drive on uneven roads and fill up your memory card with files that won’t be overwritten.

5. Parking mode
   When it’s turned on, the camera left in your car (if connected to the power supply) registers the car shaking (for example, due to a parking crash), turns on, and starts recording (the recordings are automatically protected from being overwritten.) Turning the parking mode off when driving is recommended. It can block the loop recording function.

6. Motion detection mode
   When it’s turned on and you leave the camera in standby mode, plugged into the power supply, the camera will turn on and record a short video if it detects motion.

7. Sound recording
   The camera can record sound along with video footage.

SAFETY MEASURES

1. Do not disassembly or interfere with the camera. If the device is faulty, contact the service point.
2. Only use the original accessories.
3. Use only the original charger, included in the set. Using a different power supply can affect the battery negatively.
4. Do not use the device for purposes that are against the law of the country or region you are in.
5. The operating temperature of the device is 0-35°C. Storage temp. is 5°C to 45°. Operating air humidity is 5-90% without condensation
6. Avoid damaging the device with physical force.
7. Clean the device, especially the lens. Do not use detergents or other chemicals when cleaning the device.
8. Clean the device only when it’s disconnected from the power supply.
9. Keep the device away from children.
10. Do not expose the device to very high temperatures and fire.

FAQ

1. The device doesn’t turn on, the screen is flickering.
   – Charge the device’s battery before using the device.

2. The device doesn’t turn on/off automatically.
   – This can be caused by a constant power supply in the car’s lighter socket.

3. The device restarts when driving.
   – Check the power supply.

4. The device doesn’t record in the loop (or records randomly).
   – Check the “Motion detection” and “Parking mode” settings – both should be turned off when driving.

5. The device displays a “Memory card full” message.
   – Check “G-sensor” and “Parking mode” settings and set them to a minimum.
   The memory card should be formatted to the FAT32 file system, first on a computer and then in the camera.

6. The device records noise or distorted, unclear sound.
   – The device has a very sensitive microphone that records sound from the surroundings.
   The recorded sounds can overlap. Air conditioning blowing air on your front windshield can also affect the sound recorded.

7. The device doesn’t respond.
   – Press the RESET button or restore factory settings.

8. There are vertical stripes on the recording.
   – Wrong screen refresh rate setting. Change the frequency to “50Hz” or “60Hz”, depending on the local settings.

Due to the constant improvement of our products, the manufacturer reserves the right to make changes in the device and its settings without prior information, some of the functions described in this manual can slightly differ in reality.

WARNING: Use only the original charger with 5V/1A power output. (Do not connect directly to a 220V/230V power socket.) Not following the instructions can lead to damaging the camera or dangerous situations.
WARNING! Playing the files on a computer: The camera does not have a mass memory drive mode. To play the files on a computer, take the memory card out of the device and use a memory card reader to connect it to a computer.

SPECIFICATION

CPU: AX3291
Video resolution: Max. 1920×1080 24fps
Sensor: SP140A Lens: 4G
View angle: 110 degrees
Dimensions height/width/depth: 58x66x25mm
Display screen: 2 inch TFT
Memory: microSD memory card with up to 32GB of memory, speed class 10
Recording   format: AVI
Power supply: 5V
USB: Mini USB
Microphone/Speaker: Built-in
Battery: YES

WARRANTY CARD

The product is covered by a 24-month warranty. The terms of the guarantee can be found at: https://xblitz.pl/warranty/
Complaints should be reported using the complaint form located at: http://reklamacje.kgktrade.p1/
Details, contact, and website address can be found at: www.xblitz.pl
Specifications and contents of the kit are subject to change without notice. We apologize for any inconvenience.

The crossed-out trash can symbol indicates that unusable electrical or electronic devices, their accessories (such as power supplies, cords) or components (for example batteries, if included) cannot be disposed of alongside with household waste. In order to dispose of the devices or their components (for example, batteries) deliver the device to the collection point, where it will be accepted free of charge. The disposal is subject to the recast version of the WEEE Directive (2012/19/EU) and the Directive on batteries and accumulators (2006/66/EC). Proper disposal of the device prevents degradation of the natural environment. Information about the collection points of the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided for by the law in force in the given area.

Manufacturer:
KGK Trade sp. z o.o. sp. k.
Os. Bronze 12
31-953 Cracow
Poland

Mode in P.R.C.

References

• System reklamacyjny KGK Trend
• Xblitz - akcesoria dla kierowców, kamery, alkomaty, audio
• Warranty - Xblitz.pl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>