Ningbo 0107 Bloom Bamboo True Wireless Auto Pair Earbuds User Manual
- June 5, 2024
- Ningbo
Table of Contents
Ningbo 0107 Bloom Bamboo True Wireless Auto Pair Earbuds User manual
What’s included
- Earbuds*
- Charging Case*1
- TYPE-C cable*1
- Manual*1
Product overview
- Multifunction Touch Button
- Microphone
- LED indicator
- Ear tips
- Charging Case
- Type-C Input:
- Charging Case LED Indicator
Specifications
| Model | SL519 |
|---|---|
| Item No. | 7197-66 |
| Bluetooth range | 10m |
| Play time | 5 hours |
| Capacity of | 35mAh/400mAh |
Charging time
| 35 minutes for earbuds, 2.5 hours for charging.
Note: The earbuds can be used 2 hours after 10 minutes charged.
Input| DC 5V/0.38A
Function instruction
Power ON| Take the earbuds out from charging case or long press the multifunction button more than
3 seconds
---|---
Power OFF| Put the earbuds in the charging case or long press the
multifunction button more than 5
seconds
Answer/end call| Short press the multifunction button
Reject call| Double press the multifunction button
Play/Pause music| Press once the multifunction button
Next/Previous track| Double press the multifunction button of
R/L earbuds
Transparency Mode| Long press the multifunction button 2s
Voice assistant| Triple press the multifunction button
Reset| Four press the multifunction button
Earbuds LED indicator
Charging| Red
Fully charged| OFF
Power ON| Flash red and blue
Tow earbuds paired successfully each other| The primary earbuds will
flash red and blue, secondary earbuds will flash blue only
Paired successfully with a smartphone| Blink once per 10s
LED indicator of the Charging case
Charging| Flash Red
Fully charged| Solid Red
Operation instruction
- Charging earbuds: Put the earbuds in the charging case the earbuds will light red and turn off the LED after fully charged.
- Charging the charging case: Charge the charging case with the included TYPE-C cable. The LED indicator will flash red during charging and turn into solid red after fully charged. Do not charge longer than the suggested time. Do not charge overnight.
Mono mode (Single earbuds using):
- Take the earbuds out from the charging case or long-press the multifunction button for more than 3 seconds, the earbuds will flash blue and red, enter pairing mode.
- Enable Bluetooth search mode on your mobile device and search for the pairing name “Bloom TWS” and select it on your mobile phone.
- Once the earbuds are successfully paired, The LED indicator of the earbuds will blink once per 10s.
Stereo mode (Double earbuds using):
- Take the two earbuds out from the charging case or long-press the multifunction button for more than 3 seconds, then hold them close to each other.
- Earbuds will automatically link together after a few seconds and you will hear an alert tone. The primary earbuds will flash red and blue, secondary earbuds will flash blue only
- Enable Bluetooth search mode on your mobile device and search for the pairing name “Bloom TWS” and select it on your mobile phone. Once the earbuds are successfully paired, the LED indicator of two earbuds will blink once per 10s.
NOTE
- If you attempt to pair before the earbuds have paired to each other, the earbuds will go into single earbud use. In this case, restart the process (Select forget device from your Bluetooth List).
- Once they are paired successfully, the primary earbuds will flash red and blue, secondary earbuds will flash blue only.
- Turn off one earbud, another will also turn off automatically. But put one earbud in the charging case, another will not turn off.
Warning
- Don’t wash the charging case with water, only use a cloth to clean it.
- Don’t disassemble and repair the earbuds and charging case by yourself.
- Don’t put the earbuds and charging case in the disinfection cabinet for sterilizing
- Don’t through it away randomly since it has a battery, please put it into a battery recycling trash can.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the Ilimits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequencyenergy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help