SOMOGYI MVN 510 Wireless Microphone Set Instruction Manual

: June 5, 2024
: SOMOGYI

Table of Contents

Specifications
WIRELESS MICROPHONE SET
INSTALLATION
ADVICES
TROUBLESHOOTING
CLEANING
WARNINGS
producer
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SOMOGYI MVN 510 Wireless Microphone Set Instruction Manual

Specifications

open area operation range ≈60 m
frequency range 174 – 230 MHz
max. power output <10 mW
frequency stability ±0,007 %
audio frequency range 40 – 18.000 Hz
S/N > 70 dB
audio dynamic > 70 dB
ta 0 — 45 °C
batteries 2 x AA(1,5 V)
dimensions Ø55/35 x 240 mm
weight nt 180 g

sensitivity 3 pV – S/N 30 dB
frequency stability ±0,007 °A)
audio frequency range 40 — 18.000 Hz
S/N > 70 dB
audio dynamic > 70 dB
audio output XLR, LINE 0 — 280 mV
THD < 0,5 % to -5 — 45 °C
output connectors XLR, 06,3 mm LINE
dimensions 210 x 45 x 140 mm
weight _ 470 g

voltage 220-240 V- / 50 Hz
power 3 W
current 0,013 A

WIRELESS MICROPHONE SET

Before using the product for the first time, please read the instructions for use below and retain them for later reference. The original instructions were written in the Hungarian language.

After unpacking the unit, confirm that it has not been damaged during transit. Keep the packaging away from children if it contains plastic bags or other potentially hazardous components.

This appliance may only be used by persons with impaired physical, sensory or mental capabilities, or lacking in experience or knowledge, as well as children from the age of 8, if they are under supervision or have been given instruction concerning use of the appliance by a person responsible for their safety and they have understood the hazards associated with use. Children should not be allowed to play with the unit. Children may only clean or perform user maintenance on the appliance under supervision.

2 hand microphones in the set
operation range in open field: max. 60 m
stable quartz-frequency technology
interference suppression and feedback suppression electronics
microphones are mutable without switch off
operation display LED on the microphones
audio signal and RF signal display on the receiver
frequency indication on the receiver (not LCD)
XLR & LINE OUT dual output connector
designed for household purposes, not for professional use
operating frequency band: 174-230 MHz
accessory: ∅6,3 mm – 6,3 mm audio connection cable, 1,0 m
microphones: ∅55/35 x 240 mm, 2 x AA (1,5 V) battery, not included
receiver: 210 x 45 x 140 mm, 220-240 V/50 Hz, ~1,1 m power cable

INSTALLATION

Handheld microphone

Carefully unscrew the end of microphone grip, and place two pcs AA (1,5V) alkaline batteries, according to the marked polarity. Put back the cover of the battery compartment.

Turning on and off happens with ON-OFF switch. In the middle position, the microphone can be mute without switching it off. Warning, the LED display is constructed for indication of the switched on status and identification of microphone when using with the receiver unit, this is not an active LCD.

Replace the batteries, if the operation range would decrease or the transmission is noisy!

The battery should be replaced by adults only!
Do not use different kinds of batteries and/or used and new batteries together!
If the batteries are depleted, or you are not planning to use device for longer period, immediately remove the batteries!
If there is some liquid flown out, then take a protective glove and clean the battery holder with a dry cloth!
Do not open, burn and short circuit the batteries!
It is forbidden to charge the batteries which are not rechargeable! Risk of explosion!
Do not use accumulators instead of batteries, because their voltage and efficiency is significantly lower!
In cold circumstances, the power of the batteries weakens, frequent battery replacement may needed!

Receiver

Connect the unit to the input of an audio amplifier or mixer or an active sound box, using the OUT MIX (LINE IN linelevel input) or BALANCE (XLR symmetric microphone input) outputs.

Use only one mode at one time. Connect the power cable to power outlet and switch on the unit with I/0 switch. If the microphones are switched on, then you can set the desired voice output level with VOLUME switch. Ideal setting depends on the location of the microphones and settings of the amplifier as well. The AF (audio frequency) and RF (radio frequency) displays will give information about the stable radio connection. Carefully pull out the antennas and search the best receiving position!

ADVICES

The antennas of handheld microphones are usually situated at the bottom. Therefore do not touch the bottom of the microphones, since it may shield the transmission.
Do not move the microphones in your hand, because it can change the receiving conditions.
Do not have switched-on mobile phone, Bluetooth speaker, TV, computer, Wi Fi router or any other radio frequency operated device in the near, because it can disturb the receiving.
Receiver unit has to be 1 meter high above the ground. Do not mount on wall or put on a wall shelf, because it is significantly interfering the receiving conditions.
Don’t place bigger size of metal objects or other electric appliance near the receiver unit.
Operating time of alkaline batteries is usually 8 hours, but it may change depending on the conditions of use.

TROUBLESHOOTING

If there is no sound or it is noisy, check if

connection is according to the prescriptions
there is proper power supply and the batteries are correct
there is any damaged wire
the amplifier has set properly
distance is beyond the recommended
there is other disturbing electric appliance nearby

CLEANING

Switch off and power off the unit by unplugging it from the electric outlet before cleaning! Use a dry, soft cloth! Do not use any aggressive cleaners or liquids!

WARNINGS

Please read the instructions carefully before use, and keep it to have it available in the future!
Do not lead the power cable under carpets, doormats, etc., and prevent it from being pulled out accidentally or tripped over. The appliance should be located so as to allow easy access and removal of the power plug! By powering off the unit, don’t pull the cable but handle the plug and pull it out from the electric outlet!
Warming of the unit during operation is natural. Do not cover the appliance, because covering the unit can cause overheating, fire, electric shock or default!
Efficiency range and sound quality may decrease if there are appliances operated nearby with radio frequency (mobile phone, Wi-Fi router, computer, TV …), or there are big metal objects situated among the appliances (metal shelves, Ferro-concrete wall, cooling- and heating appliances).
Pursue not to have foreign object between the microphones and the receiver.
Do not place the microphones near speakers, since it can cause noise feedback!
Do not use appliances together in one operation range (c.a. 60 m) with same operation frequency!
Use in dry, indoor circumstances only!
If the power cable is damaged or any other irregular operation detected, immediately unplug the device and contact a specialist!
After usage or not planning to use it for longer period, unplug it from the power network!
Keep the cables connecting the units away from other power cables!
Do not operate the appliance near strong magnetic field!
Protect it from dust, humidity, liquids, dampness, frost, shock and direct thermal radiation or sunshine!
Do not expose the unit to splashing water and do not place objects filled with liquid, for example glass on it!
Open source of flame, ex. lit candle can not be placed on the unit!
Do not attempt to disassemble or modify the unit or its accessories, because it can cause fire, accident or electric shock!
Due to presence of mains voltage, please follow the usual life protection rules!
Do not touch the unit or the power cable with wet hands!
The appliance is made for household use, not for public.
The device operates in the frequency band designated but not harmonised for radio microphones. Before use, please check if operation doesn’t restricted by local regulations at your residence! In some areas, for example in Romania, disturbing interferences can occur in connection with terrestrial television broadcasting on frequencies used for different purposes.
Somogyi Elektronic Ltd. certifies, that type radio-equipment conforms to 2014/53/EU directive.
Full text of EU Certification of Conformity is available at the following link: www.somogyi.hu
Due to continuous improvements the design and specifications may change without any prior notice.
We don’t take the responsibility for printing errors and we apologize for them if there’s any.

Caution: Risk of electric shock! Do not attempt to disassemble of modify the unit or its accessories. In case any part is damaged, immediately power off the unit and seek the assistance of a specialist.

In the event that the power cable should become damaged, it should only be replaced by the manufacturer, its service facility or similarly qualified personnel

Waste equipment must not be collected separately or disposed of with household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.

DISPOSING OF ALKALINE AND RECHARGEABLE BATTERIES
Batteries, whether alkaline or rechargeable, must not be handled together with regular household waste. It is the legal obligation of the product’s user to dispose of batteries at a nearby collection center or at a retail shop. This ensures that the batteries are ultimately neutralized in an environment- friendly way.

producer

SOMOGYI ELEKTRONIC®
H – 9027
Győr, Gesztenyefa út 3.
www.somogyi.hu

Distribútor: SOMOGYI ELEKTRONIC SLOVENSKO s.r.o.
Ul. gen. Klapku 77, 945 01 Komárno, SK
Tel.: +421/0/ 35 7902400
www.somogyi.sk

Distribuitor: S.C. SOMOGYI ELEKTRONIC S.R.L.
J12/2014/13.06.2006 C.U.I.: RO 18761195 Cluj-Napoca, judeţul Cluj, România, Str. Prof. Dr. Gheorghe Marinescu, nr. 2, Cod poştal: 400337
Tel.: +40 264 406 488
Fax: +40 264 406 489
www.somogyi.ro

Uvoznik za SRB: ELEMENTA d.o.o.
Jovana Mikića 56, 24000 Subotica, Srbija
Tel:+381(0)24 686 270
www.elementa.rs
Zemlja uvoza: Mađarska
Proizvođač: Somogyi Elektronic Kft.

SOMOGYI logo