SOMOGYI FZ 56 Outdoor Antenna Amplifier Instruction Manual

: June 5, 2024
: SOMOGYI

Table of Contents

DVB-T/T2 outdoor antenna with signal amplifier
INSTALLATION
CLEANING AND MAINTENANCE
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

instruction manual

FZ 56

DVB-T/T2 outdoor antenna with signal amplifier

Before using the product for the first time, please read the instructions for use below and retain them for later reference. The original instructions were written in the Hungarian language. This appliance may only be used by persons with impaired physical, sensory or mental capabilities, or lacking in experience or knowledge, as well as children from the age of 8, if they are under supervision or have been given instruction concerning the use of the appliance by a person responsible for their safety and they have understood the hazards associated with use. Children should not be allowed to play with the unit. Children may only clean or perform user maintenance on the appliance under supervision.

outstandingly high sensitivity
ideal for receiving radio and TV broadcasts
can be used to receive both analog and digital signals wall mount and metal clamp included
can be hanged, screwed or with the clamp fixed to a rod
power supply: 12V network adapter, included
inbuilt „F” socket necessary to obtain a connection cable for it

SETUP

Before using the antenna an antenna cable must be obtained of the required length. Depending on the placement usually, a 5-15 meter long connection cable is necessary. On one end of the cable, an F plug on the other end a coaxial plug must be installed.
Plug the “F” plug into the antenna, and the coaxial plug into the black box (amplifier)
Connect the wire of the network adapter into the black box, then the adapter to the network, and turn the amplifier on.
Connect the antenna plug into the receiver device (television, radio, set-top box…). Turn the device on and tune the programs.
By changing the position of the antenna, find the optimal receiving place. Only after this is done fix the antenna to its final place.
• The quality of reception is greatly influenced by the placement of the antenna. Do not place it in the immediate vicinity of electronic devices, or larger metal objects, because those can deteriorate the reception!
• The device can only be separated from the network by unplugging the power cable from the mains!

INSTALLATION

Make sure, that the antenna is fixed safely and stable! The design of the stand is appropriate for both horizontal and vertical placement. The screw fixing the antenna to the stand must be tightened firmly, but with making sure the plastic parts do not crack. The support arm can be hanged, screwed, or with the included metal clamp fixed to an antenna rod.
• Occasionally make sure that the fixing screws did not loosen, and that the supporting arm is not damaged!

CLEANING AND MAINTENANCE

Occasionally check the stable contact of connectors! The stains from the casing can be removed by using a slightly humid cloth. Do not use aggressive chemicals!
WARNINGS

If you notice any abnormalities, or if the network adapter is damaged, immediately cut the power from the device, and contact a specialist!
Never connect the adapter to the network with a wet, moist hand!
If not in use for a prolonged period cut the power by unplugging the network adapter.
The adapter and the amplifier are only usable indoors, under dry circumstances!
Due to continuous development, the technical data and design can change without prior notice.
We do not take responsibility for the possible printing errors and are sorry if any occurs.

Waste equipment must not be collected separately or disposed of with household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of products at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.

Table 1. External power supply, specifications external power supply

Manufacturer’s name or trade mark, commercial registration number, and address|

MAW’ ELEKTRONIC

9027 Gy6r,
GeSztenyefa Ot 3.
08-09-002824

---|---
Model identifier| $120020-EU
—(●+
Input voltage!| 100-240 V-
Input AC frequency! Demand valtearam frekvenciaja| 50 / 60 Hz
Output voltage| 12V ****
Output anent| 200 mA
Output power 1| 2,4 W
Average active efficiency| 77,55%
Efficiency at low load (10%)| 63,16%
No-load power consumption| 0,069 W

Producer SOMOGYI ELEKTRONIC • H – 9027 • GA*, Geszlenyefa id 3. • wwwsomogyi.hu