CHAUVET PROFESSIONAL Rogue R3 Beam High-Powered Beam Fixture Moving Head User Guide
- June 5, 2024
- Chauvet Professional
Table of Contents
CHAUVET PROFESSIONAL Rogue R3 Beam High-Powered Beam Fixture Moving Head
About This Guide
The Rogue R3 Beam Quick Reference Guide (QRG) has basic product information
such as connection, mounting, menu options, and DMX values. Download the User
Manual from www.chauvetprofessional.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change
without notice.
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR
WEBSITE. For Customers in the United States and Mexico:
www.chauvetlighting.com/warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the
Netherlands, Luxembourg, France, and Germany: www. Chauvet lighting.EU
/warranty-registration.
Chauvet warrants that this product shall be free from defects in material and
workmanship under normal use, for the period specified in, and subject to the
exclusions and limitations set forth in the full limited warranty on our
website. This warranty extends only to the original purchaser of the product
and is not transferable. To exercise rights under this warranty, you must
provide proof of purchase in the form of an original sales receipt from an
authorized dealer that shows the product name and date of purchase. THERE ARE
NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal
rights. You may also have other rights that vary from state to state and
country to country. This warranty is valid only in the United States, United
Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France,
Germany, and Mexico. For warranty terms in other countries, please consult
your local distributor.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
- DO NOT open this product. It contains no user-serviceable parts.
- DO NOT look at the light source when the product is on.
- DO NOT leave any flammable material within 8 in (20 cm) of this product while operating or connected to power.
- DO NOT operate this product if the housing, lenses, or cables appear damaged.
- DO NOT connect this product to a dimmer or rheostat.
- DO NOT operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect it (IP20).
- CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
- CAUTION: This product’s housing may be hot when lights are operating.
- USE a safety cable when mounting this product overhead.
- ONLY connect this product to a grounded and protected circuit.
- ONLY use the hanging/mounting bracket or the handles to carry this product. Do not carry by the moving head.
- Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
- In the event of a serious operating problem, stop using immediately.
- The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
- The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 26.2 ft (8 m) is not expected.
- If the external flexible cable or cord of this luminaire is damaged, it shall be replaced with a special cable or cord exclusively available from the manufacturer or its service agent.
- The light source contained in this luminaire shall only be replaced by the manufacturer, its service agent, or a similarly qualified person.
- The luminaire is intended for professional use only.
What is Included
- Rogue R3 Beam
- Neutrik powerCON® power cord
- 2 Omega brackets with mounting hardware
- Quick Reference Guide
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
It is possible to link up to 3 Rogue R3 Beam products at 120 V, 6 products at
208 V, or 7 products at 230 V. Never exceed this number. Power-linking cords
can be purchased separately from Chauvet.
AC Plug
To eliminate unnecessary wear and improve its lifespan, during periods of non- use completely disconnect the product from power via breaker or by unplugging it.
Replacing the Fuse
- Disconnect the product from power.
- Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
- Remove blown fuse and replace with a good fuse of the same type and rating.
- Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Rogue R3 Beam will work with a DMX controller using a 3- or 5-pin DMX
serial connection. A DMX Primer is available at
www.chauvetprofessional.com.
DMX Connection
The Rogue R3 Beam uses a 3- or 5-pin DMX data connection for its DMX
personalities: 16CH and 19CH. See the User Manual for information about
connecting and configuring the product for DMX operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled
devices to communicate bi-directionally along existing DMX cabling. Check the
DMX controller’s User Manual or with the manufacturer, as not all DMX
controllers have this capability. The Rogue R3 Beam supports RDM protocol that
allows feedback to make changes to menu map options. Download the User Manual
from www.chauvetprofessional.com for
more details.
Mounting
Before mounting this product, read the Safety Notes. Use at least one mounting
point per product. Make sure the mounting clamps are capable of supporting the
weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/.
Mounting Diagram
Control Panel Description
Button | Function |
---|---|
< MENU> | Exits from the current menu or function |
< ENTER> | Enables the currently displayed menu or sets the currently |
selected value into the selected function
< UP>| Navigates upwards through the menu list and increases the numeric
value when in a function
< DOWN>| Navigates downwards through the menu list and decreases the
numeric value when in a function
Menu Map
Refer for the Rogue R3 Beam product page on
www.chauvetprofessional.com for the
latest menu map.
Main Level | Programming Levels | Description |
---|---|---|
Address | 001–512 | Sets the starting address |
Run Mode
| DMX| 16CH| Selects the DMX personality
19CH
Auto Test| Auto test all functions
Manual Test
| Pan|
000–255
|
Manually control and test all settings through the control panel
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Dimmer Fine
Shutter
Color
Gobo
Prism1
Prism1 Rot
Prism2
Prism2 Rot
Frost
Focus
P/T Macro
P/T Ma. Speed
Special Function
Setup
| Pan Reverse| NO| Normal pan
YES| Reversed pan
Tilt Reverse| NO| Normal tilt
YES| Reversed tilt
Screen Reverse| NO| Normal screen display
YES| Inverted screen display
Pan Angle
| 540| 540° pan range
360| 360° pan range
180| 180° pan range
Tilt Angle
| 270| 270° tilt range
180| 180° tilt range
90| 90° tilt range
BL. O. P/T Move| YES| Blackout while panning/tilting
NO| Do not blackout while panning/tilting
BL. O. Color Move| YES| Blackout while color wheel is moving
NO| Do not blackout while color wheel is moving
BL. O. Gobo Move| YES| Blackout while gobo wheels are moving
NO| Do not blackout while gobo wheels are moving
Main Level| Programming Levels| Description
---|---|---
Setup
(cont.)
|
Lamp Settings
| On/Off| ON| Turns lamp on/off
OFF
State/ Power On| ON| Defines the status of lamp when powering up
product
OFF
Off via DMX| YES| Turns off the unit via DMX controller
NO
On if DMX On| YES| Turns lamp on when DMX signal is detected
NO
Off if DMX Off| YES| Turns lamp off when DMX signal is lost
NO
Ignition Delay| 000–255| Selects duration of delay between product
power on and lamp power on
Low Power Delay| 000–255| Selects the duration of delay when
shutter is closed and lamp enters lower power state
Reset Lamp Time| YES| Resets lamp timer to 0
NO| Leaves lamp time unchanged
Maintenance Timer
| Interval| 000–250| Defines amount of hours between maintenance
Remaining Time| NO| Shows amount of time remaining in maintenance
cycle
RESET| Resets the time back to the beginning
Reset Function
| Pan/Tilt|
YES/NO
|
Reset individual functions or all functions from start-up
Shutter/ Prism
Color
Gobo
Frost/ Focus
All
Factory Settings| YES| Reset to factory default settings
NO
Sys Info
|
System Information
| Ver| V_| Shows firmware version
Running Mode| _| Shows current running mode
DMX Address| _| Shows current DMX address
Temperature| _| Displays the product’s temperature in °C
Lamp On Time| | Displays the amount of time the lamp has
been on (provided the counter has been reset upon installation of new lamp)
Remain Time| _| Shows amount of time remaining in
maintenance cycle
UID| _| Shows product UID
Fan1 Speed| _| Shows speed of Fan 1
Fan2 Speed| _| Shows speed of Fan 2
DMX Values 19CH
Channel | Function | Value | Percent/Setting |
---|---|---|---|
1 | Pan | 000 ó 255 | 0–100% |
2 | Pan fine | 000 ó 255 | Fine control (16-bit) |
3 | Tilt | 000 ó 255 | 0–100% |
4 | Tilt fine | 000 ó 255 | Fine control (16-bit) |
5 | Pan/tilt speed | 000 ó 255 | Fast to slow |
6 | Dimmer | 000 ó 255 | 0–100% |
7 | Dimmer fine | 000 ó 255 | Fine control (16-bit) |
000 ó 007 | Closed | ||
008 ó 015 | Open | ||
016 ó 131 | Synchronized strobe, slow to fast | ||
8 | Strobe | 132 ó 167 |
168 ó 203
| Fast close, slow open (slow to fast)
Slow close, fast open (slow to fast)
| | 204 ó 239| Pulse strobe, slow to fast
| | 240 ó 247| Random strobe, slow to fast
| | 248 ó 255| Open
| | 000 ó 004| Open
| | 005 ó 008| Red
| | 009 ó 012| Orange
| | 013 ó 016| Cyan
| | 017 ó 020| Light green
| | 021 ó 024| Light yellow
| | 025 ó 028| Lavender
| | 029 ó 032| Pink
| | 033 ó 036| Yellow
9| Color wheel| 037 ó 040| Magenta
| | 041 ó 044| Light blue
| | 045 ó 048| Amber
| | 049 ó 052| CTO 5600K
| | 053 ó 056| CTO 6500K
| | 057 ó 060| UV
| | 061 ó 127| Split colors
| | 128 ó 189| Clockwise color scroll, fast to slow
| | 190 ó 193| Stop
| | 194 ó 255| Counterclockwise color scroll, slow to fast
Channel| Function| Value| Percent/Setting
---|---|---|---
| | 000 ó 003| Open
| | 004 ó 006| Gobo 1
| | 007 ó 009| Gobo 2
| | 010 ó 012| Gobo 3
| | 013 ó 015| Gobo 4
| | 016 ó 018| Gobo 5
| | 019 ó 021| Gobo 6
| | 022 ó 024| Gobo 7
| | 025 ó 027| Gobo 8
| | 028 ó 030| Gobo 9
| | 031 ó 033| Gobo 10
| | 034 ó 036| Gobo 11
| | 037 ó 039| Gobo 12
| | 040 ó 042| Gobo 13
| | 043 ó 045| Gobo 14
| | 046 ó 048| Gobo 15
| | 049 ó 051| Gobo 16
| | 052 ó 055| Gobo 17
| | 056 ó 059| Open
10| Static gobo wheel| 060 ó 063| Gobo 1 shaking, slow to fast
| | 064 ó 067| Gobo 2 shaking, slow to fast
| | 068 ó 071| Gobo 3 shaking, slow to fast
| | 072 ó 075| Gobo 4 shaking, slow to fast
| | 076 ó 079| Gobo 5 shaking, slow to fast
| | 080 ó 083| Gobo 6 shaking, slow to fast
| | 084 ó 087| Gobo 7 shaking, slow to fast
| | 088 ó 091| Gobo 8 shaking, slow to fast
| | 092 ó 095| Gobo 9 shaking, slow to fast
| | 096 ó 099| Gobo 10 shaking, slow to fast
| | 100 ó 103| Gobo 11 shaking, slow to fast
| | 104 ó 107| Gobo 12 shaking, slow to fast
| | 108 ó 111| Gobo 13 shaking, slow to fast
| | 112 ó 115| Gobo 14 shaking, slow to fast
| | 116 ó 119| Gobo 15 shaking, slow to fast
| | 120 ó 123| Gobo 16 shaking, slow to fast
| | 124 ó 127| Gobo 17 shaking, slow to fast
| | 128 ó 189| Clockwise gobo scroll, fast to slow
| | 190 ó 193| Stop
| | 194 ó 255| Counterclockwise gobo scroll, slow to fast
11| Prism 1| 000 ó 004
005 ó 255
| No function
Prism index
| | 000 ó 127| Prism index
12| Prism 1 rotation| 128 ó 189
190 ó 193
| Clockwise rotation, fast to slow
Stop
| | 194 ó 255| Counterclockwise rotation, slow to fast
13| Prism 2| 000 ó 004
005 ó 255
| No function
Prism index
| | 000 ó 127| Prism index
14| Prism 2 rotation| 128 ó 189
190 ó 193
| Clockwise rotation, fast to slow
Stop
| | 194 ó 255| Counterclockwise rotation, slow to fast
15| Frost| 000 ó 255| 0–100%
16| Focus| 000 ó 255| 0–100%
Channel| Function| Value| Percent/Setting
---|---|---|---
| | 000 ó 007| No function
| | 008 ó 015| Effect 1
| | 016 ó 023| Effect 2
| | 024 ó 031| Effect 3
| | 032 ó 039| Effect 4
| | 040 ó 047| Effect 5
| | 048 ó 055| Effect 6
| | 056 ó 063| Effect 7
| | 064 ó 071| Effect 8
| | 072 ó 079| Effect 9
| | 080 ó 087| Effect 10
| | 088 ó 095| Effect 11
| | 096 ó 103| Effect 12
| | 104 ó 111| Effect 13
| | 112 ó 119| Effect 14
17| Movement macros| 120 ó 127
128 ó 135
| Effect 15
Effect 16
| | 136 ó 143| Effect 17
| | 144 ó 151| Effect 18
| | 152 ó 159| Effect 19
| | 160 ó 167| Effect 20
| | 168 ó 175| Effect 21
| | 176 ó 183| Effect 22
| | 184 ó 191| Effect 23
| | 192 ó 199| Effect 24
| | 200 ó 207| Effect 25
| | 208 ó 215| Effect 26
| | 216 ó 223| Effect 27
| | 224 ó 231| Effect 28
| | 232 ó 239| Effect 29
| | 240 ó 247| Effect 30
| | 248 ó 255| Effect 31
18| Movement macro speed| 000 ó 255| 0–100%
| | 000 ó 069| No function
| | 070 ó 079| Enable pan/tilt blackout
| | 080 ó 089| Disable pan/tilt blackout
| | 090 ó 099| Enable blackout while color wheel is moving
| | 100 ó 109| Disable color wheel blackout
| | 110 ó 119| Enable blackout while gobo wheels are moving
| | 120 ó 129| Disable gobo wheel blackout
| | 130 ó 139| Lamp on
| | 140 ó 149| Pan/tilt reset
19| Control| 150 ó 159| Color wheel reset
| | 160 ó 169| Gobo wheel reset
| | 170 ó 179| Shutter/prism reset
| | 180 ó 189| No function
| | 190 ó 199| Focus reset
| | 200 ó 209| All reset
| | 210 ó 219| Enable blackout all function during pan/tilt
| | 220 ó 229| Disable blackout all function during pan/tilt
| | 230 ó 239| Lamp off
| | 240 ó 255| No function
16CH
Channel | Function | Value | Percent/Setting |
---|---|---|---|
1 | Pan | 000 ó 255 | 0–100% |
2 | Pan fine | 000 ó 255 | Fine control (16-bit) |
3 | Tilt | 000 ó 255 | 0–100% |
4 | Tilt fine | 000 ó 255 | Fine control (16-bit) |
5 | Pan/tilt speed | 000 ó 255 | Fast to slow |
6 | Dimmer | 000 ó 255 | 0–100% |
000 ó 007 | Closed | ||
008 ó 015 | Open | ||
016 ó 131 | Synchronized strobe, slow to fast | ||
7 | Strobe | 132 ó 167 |
168 ó 203
| Fast close, slow open (slow to fast)
Slow close, fast open (slow to fast)
| | 204 ó 239| Pulse strobe, slow to fast
| | 240 ó 247| Random strobe, slow to fast
| | 248 ó 255| Open
| | 000 ó 004| Open
| | 005 ó 008| Red
| | 009 ó 012| Orange
| | 013 ó 016| Cyan
| | 017 ó 020| Light green
| | 021 ó 024| Light yellow
| | 025 ó 028| Lavender
| | 029 ó 032| Pink
| | 033 ó 036| Yellow
8| Color wheel| 037 ó 040| Magenta
| | 041 ó 044| Light blue
| | 045 ó 048| Amber
| | 049 ó 052| CTO 5600K
| | 053 ó 056| CTO 6500K
| | 057 ó 060| UV
| | 061 ó 127| Split colors
| | 128 ó 189| Clockwise color scroll, fast to slow
| | 190 ó 193| Stop
| | 194 ó 255| Counterclockwise color scroll, slow to fast
Channel| Function| Value| Percent/Setting
---|---|---|---
| | 000 ó 003| Open
| | 004 ó 006| Gobo 1
| | 007 ó 009| Gobo 2
| | 010 ó 012| Gobo 3
| | 013 ó 015| Gobo 4
| | 016 ó 018| Gobo 5
| | 019 ó 021| Gobo 6
| | 022 ó 024| Gobo 7
| | 025 ó 027| Gobo 8
| | 028 ó 030| Gobo 9
| | 031 ó 033| Gobo 10
| | 034 ó 036| Gobo 11
| | 037 ó 039| Gobo 12
| | 040 ó 042| Gobo 13
| | 043 ó 045| Gobo 14
| | 046 ó 048| Gobo 15
| | 049 ó 051| Gobo 16
| | 052 ó 055| Gobo 17
| | 056 ó 059| Open
9| Static gobo wheel| 060 ó 063| Gobo 1 shaking, slow to fast
| | 064 ó 067| Gobo 2 shaking, slow to fast
| | 068 ó 071| Gobo 3 shaking, slow to fast
| | 072 ó 075| Gobo 4 shaking, slow to fast
| | 076 ó 079| Gobo 5 shaking, slow to fast
| | 080 ó 083| Gobo 6 shaking, slow to fast
| | 084 ó 087| Gobo 7 shaking, slow to fast
| | 088 ó 091| Gobo 8 shaking, slow to fast
| | 092 ó 095| Gobo 9 shaking, slow to fast
| | 096 ó 099| Gobo 10 shaking, slow to fast
| | 100 ó 103| Gobo 11 shaking, slow to fast
| | 104 ó 107| Gobo 12 shaking, slow to fast
| | 108 ó 111| Gobo 13 shaking, slow to fast
| | 112 ó 115| Gobo 14 shaking, slow to fast
| | 116 ó 119| Gobo 15 shaking, slow to fast
| | 120 ó 123| Gobo 16 shaking, slow to fast
| | 124 ó 127| Gobo 17 shaking, slow to fast
| | 128 ó 189| Clockwise gobo scroll, fast to slow
| | 190 ó 193| Stop
| | 194 ó 255| Counterclockwise gobo scroll, slow to fast
10| Prism 1| 000 ó 004
005 ó 255
| No function
Prism index
| | 000 ó 127| Prism index
11| Prism 1 rotation| 128 ó 189
190 ó 193
| Clockwise rotation, fast to slow
Stop
| | 194 ó 255| Counterclockwise rotation, slow to fast
12| Prism 2| 000 ó 004
005 ó 255
| No function
Prism index
| | 000 ó 127| Prism index
13| Prism 2 rotation| 128 ó 189
190 ó 193
| Clockwise rotation, fast to slow
Stop
| | 194 ó 255| Counterclockwise rotation, slow to fast
14| Frost| 000 ó 255| 0–100%
15| Focus| 000 ó 255| 0–100%
Channel| Function| Value| Percent/Setting
---|---|---|---
| | 000 ó 069| No function
| | 070 ó 079| Enable pan/tilt blackout
| | 080 ó 089| Disable pan/tilt blackout
| | 090 ó 099| Enable blackout while color wheel is moving
| | 100 ó 109| Disable color wheel blackout
| | 110 ó 119| Enable blackout while gobo wheels are moving
| | 120 ó 129| Disable gobo wheel blackout
| | 130 ó 139| Lamp on
| | 140 ó 149| Pan/tilt reset
16| Control| 150 ó 159| Color wheel reset
| | 160 ó 169| Gobo wheel reset
| | 170 ó 179| Shutter/prism reset
| | 180 ó 189| No function
| | 190 ó 199| Focus reset
| | 200 ó 209| All reset
| | 210 ó 219| Enable blackout all function during pan/tilt
| | 220 ó 229| Disable blackout all function during pan/tilt
| | 230 ó 239| Lamp off
| | 240 ó 255| No function
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>