CHAUVET PROFESSIONAL MAVERICKFORCESSPOT Maverick Force S Spot User Manual
- May 15, 2024
- Chauvet Professional
Table of Contents
- CHAUVET PROFESSIONAL MAVERICKFORCESSPOT Maverick Force S Spot
- [
- Product Information
- Product Usage Instructions
- FAQ
- Edition Notes
- 1. Before You Begin
- FCC Statement of Compliance
- Introduction
- Product Overview
- Setup
- Setup
- Operation
- Controlled Configuration
- Settings Configuration
- Maintenance
- Technical Specifications
- Contact Us
- Warranty & Returns
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CHAUVET PROFESSIONAL MAVERICKFORCESSPOT Maverick Force S Spot
Product Information
Specifications
- Model ID: MAVERICKFORCESSPOT
- Edition: Maverick Force s Spot User Manual Rev. 6
- Trademark: Chauvet, Chauvet Professional, Maverick
- Copyright: Chauvet & Sons, LLC
Product Usage Instructions
Before You Begin
Make sure to read through the entire user manual before proceeding with the installation or operation of the Maverick Force s Spot.
Introduction
Description: The Maverick Force s Spot is a versatile lighting fixture designed for various applications
Features: The product offers advanced programming options and high- quality lighting effects.
Product Overview: Familiarize yourself with the different components of the Maverick Force s Spot before use.
Product Dimensions: Refer to the manual for detailed product dimensions to ensure proper placement.
Setup
AC Power: Connect the Maverick Force s Spot to a suitable power source using the provided power cable.
Power Linking: If linking multiple units, follow the recommended power linking guidelines.
AC Plug: Ensure the AC plug is securely inserted into the power outlet.
Fuse Replacement: In case of a blown fuse, refer to the manual for instructions on safe replacement.
Signal Connections: Connect the Maverick Force s Spot to your control console following the recommended signal connection setup.
USB Software Update: Keep your device up to date by following the USB software update instructions provided.
Mounting: Install the Maverick Force s Spot in the desired location using appropriate mounting hardware.
FAQ
Q: Can I use the Maverick Force s Spot outdoors?
A: The Maverick Force s Spot is designed for indoor use. Avoid exposing it to outdoor elements to prevent damage.
Q: How do I reset the Maverick Force s Spot to factory settings?
A: Refer to the user manual for instructions on resetting the device to its factory settings.
Model ID: MAVERICKFORCESSPOT
Edition Notes
The Maverick Force s Spot User Manual includes a description, safety precautions, installation, programming, operation, and maintenance instructions for the Maverick Force s Spot as of the release date of this edition.
Trademarks
Chauvet, Chauvet Professional, the Chauvet logo, and Maverick are registered
trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet
Lighting) in the United States and other countries. Other company and product
names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited
to, all designs, text, and images are owned by Chauvet. © Copyright 2023
Chauvet & Sons, LLC. All rights reserved. Electronically published by Chauvet
in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for
professional information purposes only. Chauvet expressly prohibits the usage,
copy, storage, distribution, modification, or printing of this manual or its
content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11
in), double-sided. If using A4 paper (210 x 297 mm), configure the printer to
scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as
this manual, before installing, operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in
all respects. However, Chauvet assumes no responsibility and specifically
disclaims any and all liability to any party for any loss, damage or
disruption caused by any errors or omissions in this document, whether such
errors or omissions result from negligence, accident, or any other cause.
Chauvet reserves the right to revise the content of this document without any
obligation to notify any person or company of such revision; however, Chauvet
has no obligation to make, and does not commit to make, any such revisions.
Download the latest version from
www.chauvetprofessional.com.
Document Revision
This is revision 6 of the Maverick Force s Spot User Manual. Go to
www.chauvetprofessional.com for the
latest version.
1. Before You Begin
What Is Included
- Maverick Force s Spot
- Seetronic Powerkon IP65 power cable
- 2 Omega brackets with mounting hardware
- Quick Reference Guide
Claims
Carefully unpack the product immediately and check the container to make sure
all the parts are in the package and are in good condition.
If the box or the contents (the product and included accessories) appear
damaged from shipping, or show signs of mishandling, notify the carrier
immediately, not Chauvet. Failure to report damage to the carrier immediately
may invalidate the claim. In addition, keep the box and contents for
inspection.
For other issues, such as missing components or parts, damage not related to
shipping, or concealed damage, file a claim with Chauvet within 7 days of
delivery.
Text Conventions
| Convention | Meaning |
|---|---|
| 1–512 | A range of values |
| 50/60 | A set of values of which only one can be chosen |
| Settings | A menu option not to be modified |
| < ENTER> | A key to be pressed on the product’s control panel |
Symbols
Safety Notes
Read all the following safety notes before working with this product. These
notes contain important information about the installation, usage, and
maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained, certified technicians.
Do not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of
this product.
-
The luminaire is intended for professional use only.
-
The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 10 ft (3 m) is not expected.
-
If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or its service agent.
-
The light source contained in this luminaire shall only be replaced by the manufacturer or its service agent or a similar qualified person.
CAUTION: -
This product’s housing may be hot when operating. Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
-
When transferring the product from extreme temperature environments, (e.g., cold truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow the product to fully acclimate to the surrounding environment before connecting it to power.
-
Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding notification of strobe use.
ALWAYS: -
Disconnect from power before cleaning the product or replacing the fuse.
-
Replace the fuse with the same type and rating.
-
Use a safety cable when mounting this product overhead.
-
Connect this product to a grounded and protected circuit.
DO NOT: -
Open this product. It contains no user-serviceable parts.
-
Look at the light source when the product is on.
-
Leave any flammable material within 1.64 ft (50 cm) of this product while operating or connected to power.
-
Connect this product to a dimmer or rheostat.
-
Operate this product if the housing, lenses, or cables appear damaged.
-
Operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect it (adhere to standards for the published IP rating).
-
ONLY use the hanging/mounting bracket to carry this product.
-
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
-
The minimum startup temperature is -14°F (-10°C). Do not start the product at lower temperatures.
-
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
-
In the event of a serious operating problem, stop using immediately.
If a Chauvet product requires service, contact Chauvet Technical Support.
Before You Begin
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Warning for North America and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator and the user.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Expected LED Lifespan
Over time, use and heat will gradually reduce LED brightness. Clustered LEDs
produce more heat than single LEDs, contributing to shorter lifespans if
always used at full intensity. The average LED lifespan is 40,000 to 50,000
hours. To extend LED lifespan, maintain proper ventilation around the product,
and limit the overall intensity.
Introduction
Description
Maverick Force s Spot is ideal for small to medium multi-faceted projects in
need of seamless color-mixing, advanced optics, and control options in a
lightweight frame that weighs less than 50 lb. The compact unit features a
smart optical system that maximizes the output of 14,000 lumens and provides
high-quality color-mixing with a CTB filter. An 8-slot color wheel is also
added with split-color combinations in mind. Maverick Force s Spot features a
speedy effects engine that includes motorized iris, frost, focus, a 5-facet
prism, and wide zoom ranging from 4° to 43°. Additionally, custom gobos
created in collaboration with leading designers can be stacked on top of one
another for dynamic effects. That is a lot packed in a small frame standing
just over 2 ft tall. Control with DMX, sACN, Art-Net, or W-DMX.
Features
- Fully featured, compact, and lightweight 350 W LED yoke spot fixture including CMY color mixing, a color wheel, zoom optics, and two gobo wheels—one rotating and one static
- 16-bit dimming of master dimmer for smooth control of fades
- Variable CMY color mixing system to create a wide pallet of colors
- DMX, W-DMX, sACN, and Art-Net for full flexibility of control options
- RDM enabled for remote addressing and troubleshooting
- 4.1° to 43.1° zoom range for variable beam sizes
- Iris, 5-facet prism, and frost for beam control
- TRUE-1-compatible power input
- Three setup menu presets and preset sync for cross loading to multiple like fixtures for easy shop setup
- USB slot for software uploads
- Battery backup display with auto-rotate depending on fixture orientation
- Failsafe Ethernet connectivity allows for data to pass even if fixture power is lost
Product Overview
Product Dimensions
Setup
AC Power
The Maverick Force s Spot has an auto-ranging power supply, and it can work
with an input voltage range of 100 to 240 V~, 50/60 Hz.
To determine the product’s power requirements (e.g., circuit breaker, power
outlet, and wiring), use the current value listed on the label affixed to the
product’s back panel or refer to the product’s specifications chart. The
listed current rating indicates the product’s average current draw under
normal conditions.
- Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
- Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Power Linking
It is possible to power link Maverick Force s Spot products. See the table
below for the current draw at each voltage and frequency:
| 100 V, 60 Hz| 120 V, 60 Hz| 208 V, 60 Hz| 230 V, 50 Hz|
240 V, 60 Hz
---|---|---|---|---|---
Current Draw| 5.54 A| 4.53 A| 2.58 A| 2.33 A| 2.26 A
Never exceed 12A on a single circuit. Power-linking cables can be purchased separately.
AC Plug
The Maverick Force s Spot comes with a power input cord terminated with a Seetronic Powerkon IP65 connector on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with the product has no plug, or if the plug needs to be changed, use the table below to wire the new plug.
| Connection | Wire (U.S.) | Wire (Europe) | Screw Color |
|---|---|---|---|
| AC Live | Black | Brown | Yellow or Brass |
| AC Neutral | White | Blue | Silver |
| AC Ground | Green/Yellow | Green/Yellow | Green |
Fuse Replacement
- Disconnect this product from the power outlet.
- Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
- Remove the blown fuse, and replace with another fuse of the same type and rating (F 10 A, 250 V).
- Screw the fuse holder cap back in place and reconnect power.
Setup
Signal Connections
The Maverick Force s Spot can receive a DMX, Art-Net™, or sACN, signal. The
Maverick Force s Spot has 2 Amphenol XLRnet through ports, and 3- and 5-pin
DMX in and out ports. If using other compatible products with this product,
each can be controlled individually with a single controller.
Control Personalities
The Maverick Force s Spot uses a 3 or 5-pin DMX data connection, W-DMX, Art-
Net™, or sACN for its two control personalities: Dmx Mode 22 CH and Dmx Mode
29 CH.
- Refer to the Operation chapter to learn how to configure the Maverick Force s Spot to work in these personalities.
- The DMX Values section provides detailed information regarding the control personalities.
For more information about DMX standards or the DMX cables needed to link this product to a DMX controller, download the DMX Primer from the Chauvet website: www.chauvetprofessional.com.
Remote Device Management
Remote Device Management (RDM) is a standard for allowing DMX-enabled devices
to communicate bi-directionally along existing DMX cabling. Check the DMX
controller’s User Manual or with the manufacturer as not all DMX controllers
have this capability. The Maverick Force s Spot supports RDM protocol that
allows feedback to make changes to menu map options.
DMX Linking
The Maverick Force s Spot can be linked to a DMX controller using a 3 or 5-pin
DMX connection or a WDMX connection. For more information about DMX, read the
DMX primer at:
https://www.chauvetprofessional.com/wp-
content/uploads/2016/06/DMX_Primer.pdf.
Art-Net™ Connection
Art-Net™ is an Ethernet protocol that uses TCP/IP that transfers a large
amount of DMX512 data using an Amphenol XLRnet RJ45 connection over a large
network. An Art-Net™ protocol document is available from
www.chauvetprofessional.com.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.
sACN Connection
Streaming ACN, also known as ANSI E1.31, is an Ethernet protocol that uses the
layering and formatting of Architecture for Control Networks to transport
DMX512 data over IP or any other ACN-compatible network.
Connection Diagram
The three LED indicators in between the Ethernet through ports indicate a
connection to a network and activity on that network. They do not indicate
whether or not the
Maverick Force s Spot is receiving a signal from a controller.
USB Software Update
The Maverick Force s Spot allows for software update through USB using the
built-in USB port. To update the software using a USB type C flash drive, do
the following:
-
Power on the product and plug the flash drive into the USB port.
-
Once the flash drive has been detected, the message “USB UPDATE” will be displayed. Press
. -
the next screen will show the software versions available for this fixture on the USB drive. If you have multiple versions of software for the same fixture, arrow down to the version desired to load. Press
. -
The “USB UPDATE” screen will re-appear. Press
.
It is possible to update multiple units with the USB if they are daisy chained via DMX. -
The upgrade will start. DO NOT turn off the power or disconnect the USB while the USB LED is still blinking during the process. The screen display will read: “USB Update Wait”. USB update can take several minutes to complete.
• When the USB firmware is done uploading, in some fixtures the display will change to: “DO NOT UNPLUG, UPDATING”. -
When the update is complete, the fixture will automatically reboot.
-
Go to the Fixture Information on the product’s menu map and confirm the firmware revision
-
When the boot-up process is finished, restart the product.
- Place the .chl format file in the root folder of the USB drive.
- The product’s USB port supports up to 32GB capacity and only works with FAT32 file format.
Turning off the power or removing the USB while still blinking during the update will cause partial or total firmware failure in the targeted fixture(s). If this occurs, the user will need the UPLOAD 08 device to fix this. Please contact Chauvet regarding this device.
Mounting
Before mounting the product, read and follow the safety recommendations
indicated in the Safety Notes. For the Chauvet Professional line of mounting
clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate
room for ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this
product.
- Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming.
- Make sure adequate ventilation is provided around the product.
- Make sure that the structure onto which the product is being mounted can support the product’s weight (see the Technical Specifications).
- When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
- When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
- When power linking multiple products, mount the products close enough for power-linking cables to reach.
- The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
Procedure
The Maverick Force s Spot comes with two Omega brackets onto which a mounting
clamp can be directly attached. Mounting clamps are sold separately. Make sure
the clamps are capable of supporting the weight of this product. Use at least
two mounting points per product. For the Chauvet Professional line of mounting
clamps, go to http://www.trusst.com/products.
Mounting Diagram
Operation
Touchscreen Control Panel
The Maverick Force s Spot has a touchscreen display and six control buttons.
Navigate the menu structure by pressing the buttons, touching the images of
the buttons on the sides of the display, or touching the desired menu option
on the display directly. The touchscreen can be locked and calibrated through
the Setup options in the menu (see Touchscreen Calibration and Touchscreen
Lock).
Control Panel Description
Battery-Powered Display
The Maverick Force s Spot has a battery-powered display that enables access to
the menu when the product is powered off. Press and hold