zelmer ZBS1010 Bathroom Scale User Manual
- June 15, 2024
- zelmer
Table of Contents
zelmer ZBS1010 Bathroom Scale
WE WOULD LIKE TO THANK YOU FOR CHOOSING ZELMER. WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.
WARNING: PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO USING THE PRODUCT. STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE.
DESCRIPTION
- Scales body
- LCD screen
- Unit choose buton kg / lb
- Battery compartment
- Batteries are not included
SAFETY INSTRUCTIONS
This device is intended for domestic use only. It is not intended for commercial use. Remove the batteries from the product if you are not going to use it for a prolonged period of time. Keep this device out of the reach of children and the handicapped. Do not move the device while it is in use. Do not exceed the device’s weighing capacity. Failure to use the product properly may be hazardous, rendering the guarantee and liability null and void. This product may not be used by children. Do not store the appliance in an upright position. Do not use the appliance if it is cracked or broken.
B &B TRENDS SL accepts no liability for any damage that may be caused to people, animals or objects owing to failure to observe this warning correctly.
IMPORTANT WARNINGS
Ensure that the safety instructions marked the beginning of this manual are
followed at all times during use. The scale allows a maximum weight of 180 kg
and a precision level of 50 g. Follow the instructions below for the start-up
of this device.
INSTRUCTION MANUAL
- Remove the product from its original packaging, taking special care not to damage any of its parts. Do not use any excessive force to remove the product from the box.
- Remove the battery cover at the back of the scales.
- Place the battery in the location indicated under the cover with the positive polarity that is visible at all times. Close the cover again.
- If the device is not to be used for a prolonged period of time, remove the batteries to prevent acid leaks from the battery.
- Place the appliance on a horizontal, solid, rigid, flat, stable surface that is free of vibration.
- If the message “Lo” is displayed, replace the batteries.
- Prepare the device by selecting the appropiate unit of weight. The units are factory set to “kg”, to change to “lb” press the button located beneath the glass body labeled “UNIT”.
- Gently place your feet on the surface of the scale to start the device and wait for the symbol “0.0” to appear on the screen.
- Stand in the centre of the platform and avoid sudden movements, keep still and do not touch other objects until the scale shows your weight. The user must wait while the weight is being calculated. The scale indicates that it has completed the weighing by flashing the final value three times.
- To save energy, the device goes into sleep mode after several seconds of inactivity.
- To return to normal operation, simply place your foot lightly on the platform and wait for the symbol “0.0” to appear on the screen.
- Replace the unit in a safe and stable place.
CONTRAINDICATIONS
This product is for domestic use only and not intended for professional use.
Children should be supervised by an adult in order to prevent the device being
used as a toy. This appliance is not intended for use by persons (including
children) with any reduced physical, sensory or mental capacities, or who do
not the sufficient experience and knowledge necessary, unless they are
supervised by a person responsible for their safety.
REPAIRS
Only specialized personnel may carry out repairs on electrical devices. Any
incorrectly performed repair may lead to considerable danger to users. Please
contact after-sales service for any repairs. Failure to follow the
instructions entail the total loss of the product guarantee.
TROUBLESHOOTING GUIDE
Possible operational problems:
| INCIDENT | CAUSE | SOLUTION |
|---|---|---|
| The device does not work. | Device not switched on or battery inserted | |
| incorrectly. | Stand on the device, and wait until your weight is shown or |
press on it with your feet until “0.0” is shown on the display.
Check that the batteries are inserted correctly, making sure the polarity is correct.
The device is damaged| Contact the Zelmer technical service
Error messages “EEEE”| Overload| This means that the maximum weight is
exceeded.
PRODUCT CLEANING
This product can only be cleaned by hand using a soft cloth moistened with
mild soap. No abrasive cleaning products, abrasive brushes, solvents, benzene,
thinner or alcohol may be used to clean the device under any circumstances. Do
not immerse the appliance in water to clean it or excessively wet it. Do not
reuse the device until it is completely dry.
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and
electronic devices, known as WEEE (Waste Electrical and Electronic Equipment),
provides the legal framework applicable in the European Union for the disposal
and reuse of waste electronic and electrical devices. Do not dispose of this
product in the bin, instead going to the electrical and electronic waste
collection centre closest to your home. The product may contain batteries.
Remove them before disposing of the product and dispose in special containers
approved for this purpose.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>