VIVO STROLR Series Three Wheel Pet Stroller Instruction Manual

June 3, 2024
Vivo

vivo logo

VIVO STROLR Series Three Wheel Pet Stroller

VIVO STROLR Series Three Wheel Pet Stroller

WARNING: IMPORTANT SAFETY INFORMATION READ AND FOLLOW ALL SAFETY REQUIREMENTS

KEEP THIS MANUAL IN A SAFE AND DRY PLACE FOR FUTURE REFERENCE
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by aggressive or untrained animals, incorrect assembly or inappropriate use.

  • FOR HOUSEHOLD PETS ONLY
  •  STROLLER IS DESIGNED FOR ONE PET ONLY
  • DO NOT LEAVE THE PET UNSUPERVISED IN THE STROLLER
  • ENSURE THE STROLLER IS COMPLETELY ERECTED AND CHECK ALL LOCKS ARE ENGAGED BEFORE USE
  •  ALWAYS APPLY THE BRAKE WHENVEVER STROLLER IS STATIONARY

WARNING: DO NOT USE STROLLER ON ESCALATORS AND STAIRS; FOLD STROLLER AND CARRY
WARNING: DO NOT USE NEAR AN OPEN OR EXPOSED FLAME
CAUTION: BEFORE MAKING STROLLER ADJUSTMENTS, ENSURE PET IS CLEAR OF ANY MOVING PARTS TIPOVER WARNING

  • DO NOT HANG BAGS FROM HANDLES AS THIS MAY CAUSE STROLLER TO BECOME UNSTABLE
  • DO NOT OVERLOAD STROLLER AS STROLLER MAY BECOME UNSTABLE

WARNING: CHOKING HAZARD

PACKAGE CONTENTS

VIVO STROLR Series Three Wheel Pet Stroller 2

TOOLS NEEDED

VIVO STROLR Series Three Wheel Pet Stroller 1

ASSEMBLY STEPS

STEP 1: Unfold Stroller (A) until the frame locks into place.

VIVO STROLR Series Three Wheel Pet Stroller 13

STEP 2: Insert Front Wheel Assembly (B) into front leg of Stroller (A) until it clicks into place. Use the grey latch on Front Wheel Assembly (B) to lock orientation.
NOTE: Grey latch on Front Wheel Assembly (B) must be facing UP. Wheels will not sit properly if mounted upside-down.

VIVO STROLR Series Three Wheel Pet Stroller 14

STEP 3: Install Plastic Washers (S-C) onto one side of Rear Axle (D), followed by Rear Brakes (E), Plastic Washers (S-C), Rear Wheels (C), and Plastic Washers (S-C) as shown in diagram. Use Pins (S-B) to secure assembly in place, and cover with Wheel Caps (S-A). Repeat on other side.

VIVO STROLR Series Three Wheel Pet Stroller15 STEP 4: Attach the rear axle assembly to rear legs of Stroller (A) until it clicks into place.

VIVO STROLR Series Three Wheel Pet Stroller 16

STEP 5: Wrap the straps located under the basket of Stroller (A) around the frame. Run the long strap through both d-rings on the shorter strap, starting with the d-ring on top. Separate the d-rings with your fingers and loop the strap back in, passing it back up through the d-ring on top. Pull the strap firmly to secure.

VIVO STROLR Series Three Wheel Pet Stroller 17

STEP 6: Install Step (G) to Stroller (A) using ST4x14 Flat Head Screws (S-D) and a phillips screwdriver.

VIVO STROLR Series Three Wheel Pet Stroller 18

STEP 7: Mount Cup Holder (F) by stretching it around the handle of Stroller (A).

VIVO STROLR Series Three Wheel Pet Stroller19

STEP 8: To store the stroller, unzip the canopy, press the button located on the handle, and rotate it forward until the locks on either side release.

VIVO STROLR Series Three Wheel Pet Stroller 20

OPERATION

  • Keep pets restrained using leashes attched to the inside of the stroller while in use. Note, leashes may be hidden under pad upon arrival.
  • If the stroller is being used for a single pet, both leashes are required. If the stroller is being used for two pets, the front mesh screen must be kept shut.
  • This stroller is not designed for jogging or running.
  • Do not exceed the 30lb weight limit.

CARE & MAINTENANCE

WHEEL MAINTENANCE

  • To clean and lubricate front and rear wheels, push out locking lever under wheel housing to release rear wheel, and depress locking tabs on frame to release front wheel.
  •  Clean wheel assemblies and the rest of the frame with warm, soapy water. Dry thoroughly.
  • Keep all moving parts lubricated with light plastic safe oil to elongate use of the product. Push wheel sets back on until they click and lock position; pull on wheel housings to ensure they are secure. Push stroller back and forth and rotate swivels around to work in lubricant.

NOTE: Do NOT lubricate brake components.

Cleaning
Wipe down the stroller using warm soapy water and a scrubbing brush or dish towel and let air dry.
STORAGE
Store stroller in a clean, dry place when not in use. Do NOT place heavy items on stroller.
WARRANTY
We offer a 120 day warranty for this product. If you have any problems with the machine, please contact us directly. We have a 90 Day Return Policy.

Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. visit our web site at www.vivo-us.com

CONTACT US: help@vivo-us.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Vivo User Manuals

Related Manuals