somogyi FLB 10C LED Light Instruction Manual
- June 5, 2024
- SOMOGYI
Table of Contents
somogyi FLB 10C LED Light
PRODUCT OVERVIEW
RECHARGEABLE COB-LED FLOODLIGHT
Before using the product for the first time, please read the instruction manual below and retain it for later reference. The original instructions were written in the Hungarian language. This weather-resistant, LED floodlight is perfect for illuminating buildings or yards. It is easy to carry in your hand, and the battery-powered design provides maximum mobility. Its strong magnetic, fold-out, foldable carrying frame provides a variety of fastening, hanging, and support methods. The 2 separately movable light sources can even light in the opposite direction. The two light sources can be switched with maximum or reduced brightness. It is possible to use only one or only the other or both light sources at the same time.
INSTALLATION USE
- The luminaire does not require assembly, it is delivered completely assembled.
- Charge the lamp using the supplied micro-USB charging cable. 5 V / min. 1 A load-capacity USB adapter is required for charging, which is not included.
- The luminaire cannot light during charging.
- The charging indicator LEDs will flash red during charging, to indicate the charging process. When the battery is charged, the LEDs light up in green.
- On the charged lamp, close the charging socket with the rubber tab.
- Use the button on the back of the lamp to turn on the COB LED light sources in the following order:
- Both light sources illuminate at 100% brightness 10 W / max. 1000 lumen
- Both light sources illuminate at 50% brightness 5 W / max. 500 lumen
- One of the light sources is lit at 100% brightness 5 W / max. 500 lumen
- The other light source is lit at 100% brightness 5 W / max. 500 lumen
- Turning off.
- External devices can be charged from the USB-A socket of the luminaire.
CLEANING AND MAINTENANCE
In order to ensure optimum functioning of the luminaire, the unit may require cleaning at least once a month, depending on the degree of contamination.
- Power off the luminaire before cleaning.
- The insulating rubber feet must be placed in their place.
- Use a slightly moistened cloth to clean the outer surface of the luminaire. Do not use any aggressive cleaners. Avoid getting water inside the unit and on the electric components.
PROTECTIVE SHIELD
Do not use the product, if the protective shield is cracked or broken. In this case, the luminaire must be disposed of properly, as described in the DISPOSAL section.
TROUBLESHOOTING
Malfunction | Possible solution |
---|---|
The lamp is not lighting. | Check the switch of the lamp and charge it if |
needed.
WARNINGS
- Make sure, that the appliance has not damaged during transport.
- 5 V / min. 1 A load-capacity USB adapter is required for charging.
- The luminaire may only be used together with the protective shield.
- The LED light source of the luminaire is not replaceable. At the end of the lamp lifespan, the entire luminaire should be destroyed.
DO NOT STARE INTO THE LIGHT OF THE LED!
THE LAMP SHADE CAN NOT BE REPLACED, SO IN CASE OF ITS DAMAGE THE ENTIRE
PRODUCT MUST BE DISCARDED
PLEASE MAINTAIN THE REQUIRED DISTANCE FROM THE ILLUMINATED SURFACE (AND
SHOULD BE 0,5 M)
DISPOSAL
Waste equipment must be collected and disposed of separately of household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of products at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.
DISPOSING OF OFALKALINEAND RECHARGEABLE BATTERIES
Batteries, whether alkaline or rechargeable, must not be handled together with
regular household waste. It is the legal obligation of the product’s user to
dispose of batteries at a nearby collection center or at a retail shop. This
ensures that the batteries are ultimately neutralized in an environment-
friendly way.
SPECIFICATIONS
- charging:…………………………………………5 V / min. 1 A (USB adapter not accessory)
- length of charger cable:…………………….100 cm
- accumulator:……………………………………Li-ion / 3,7 V / 5000 mAh
- light source:…………………………………….2 x 5 W COB LED
- output:……………………………………………max. 10 W
- brightness:………………………………………max. 1000 lm
- color temperature:……………………………5000 K
- lighting time:……………………………………max. 4 h (500 lumens); max. 2 h (1000 lumen)
- charging time:………………………………….5 h / 1 Ampere
- power factor:……………………………………>0,5
- IP44 meaning: ……………………………….. Protected against solid objects that are bigger than 1mm and water splashing from all directions.
- operating temperature: …………………….-10 – +40 °C
- weight: …………………………………………..570 g
- enclosure dimensions:……………………… 25 x 20,5 x 5 cm spread out 15 x 20,5 x 18 cm propped up
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>