Nedis ACAM41BK Action camera User Manual
- June 5, 2024
- nedis
Table of Contents
ACAM41BK Action camera
User Manual
Preface
Thank you for purchasing the Nedis ACAM41BK.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
The Nedis ACAM41BK is a small and lightweight action camera that enables you to make HD images and video.
The camera has a Wi-Fi connection and can be controlled with the N-go 4K app.
Intended use
This product is intended as a recording device.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
Action camera
---|---
Article number
|
ACAM41BK
Dimensions (l x w x h)
|
60 x 31 x 41 mm
Battery Capacity
|
900 mAh
Memory
|
MicroSD card (16 – 64 GB) (not included)
Camera lens
|
Viewing angle = 140 degrees
Image format
|
.jpg
Image resolution
|
0.3 MP – 16 MP
Video format
|
.mp4
Video resolution
|
720P, 1080P, 2.7K, 4K
Time lapse
|
Up to 30 seconds
Display
|
2.0 LTPS
Current
|
Standby: 260 mAh
Working: 460 mAh
Charging time
|
3 hours
Frequency bandwidth
|
2.4 GHz
Maximum Transmission power
|
14 dBm
Recording time
The approximate recording time is an indication of how much video length can be saved on the microSD card, depending on the video quality.
The maximum video length cannot be recorded on a single battery charge.
MicroSD card
|
720p, 120 fps
|
1080p, 30 fps
|
4K, 30 fps
---|---|---|---
16 GB
|
95 minutes
|
140 minutes
|
90 minutes
32 GB
|
180 minutes
|
270 minutes
|
170 minutes
64 GB
|
340 minutes
|
520 minutes
|
320 minutes
Parts list
1. OK button
2. Power indicator LED
3. Power button
4. Camera lens
5. UP button
6. DOWN button
7. Speaker
8. Display
9. Charging indicator LED
10. Status indicator LED
11. Battery cover
12. Microphone
13. Micro USB port
14. MicroSD card slot
15. HDMI port
Additional parts (not shown in illustration)
16. Battery
17. Waterproof housing
18. Mounting accessories (x10)
19. Bandages
20. Micro USB cable
21. 3M mats
22. Tethers
23. Lens cloth
Safety instructions
WARNING
- Only use the product as described in this manual.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Disconnect the product from the electrical outlet and other equipment if problems occur.
- Do not expose the product to water or moisture.
Installation
Check the contents of the package
Check that all parts from the parts list are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Insert or change memory card
A microSD card (not included) is required to take pictures or videos. Insert the microSD card into the microSD card slot 14.
- Use a microSD card with a maximum of 64 GB storage capacity.
- Format the microSD card before use.
Battery
Charge the camera from any USB outlet with the supplied micro USB cable. The camera can be charged while recording video. Fully charging the battery takes about 3 hours.
Turn on camera
Hold the power button 3 for about 3 seconds until the status indicator LED 10 lights up blue. A welcome screen appears, and the camera enters video mode.
Switching between modes
|
Video mode
---|---
|
Picture mode
|
Slow motion mode
|
Playback mode
|
Setup mode
Switch between modes by pressing the power button 3.
Attachment
Attach the action camera into the protective casing. The protective casing can be fitted with supplied mounting accessory to your clothing, action gear, helmet, etc.
- Make sure the attachment is secure.
- Make sure the camera does not impede your movement, view, or operation of your action gear.
- Only operate the camera while you are safe and still.
Use
Record pictures and video images
In video mode, press OK to start or stop recording video.
In picture mode, press OK to take a picture.
View pictures and video images
In view mode, press UP or DOWN to go to the next or previous picture or video. Press OK to play and stop videos.
Settings menu navigation
In the settings menu, use UP and DOWN to navigate between options. Press OK to select and confirm options.
Settings menu descriptions
Setting
|
Description
---|---
Resolution
|
Select the video resolution.
Exposure
|
Compensate exposure when videos or photos are too light or too dark.
Motion detection
|
When the camera detects movement, video is recorded. The recording ends when no movement is detected for 10 seconds.
Loop record
|
Select the time length of video sections. This determines the skipping time in playback mode.
Video lapse
|
Take a series of pictures at the selected interval in video mode. These can be played back as a time lapse video.
WDR
|
The Wide Dynamic Range feature for pictures improves the exposure. This is helpful to make dark areas look lighter.
Record audio
|
Enable or disable the recording of sounds in video images.
Date stamp
|
Enable or disable imprinted date and time on the pictures.
Image size
|
Select the image size.
Quality
|
Select the quality of photos and videos.
Capture mode
|
Take a single photo or automatically shoot multiple pictures at timed intervals in picture mode.
Sharpness
|
Select sharpening of pictures and video images.
ISO
|
Select light sensitivity.
Anti-shakening
|
Enable or disable image stabilization. This only affects pictures, not videos.
White balance
|
Select white balance.
Frequency
|
Select the frequency of your power outlet.
OSD mode
|
Enable or disable on-screen icons and data.
Screensaver
|
Select the time period after which the display turns off to save power.
Rotate
|
Enable 180 degrees rotation if you mount the camera upside down.
Auto power off
|
Select the time period after which the camera turns off when not recording.
Language
|
Select the desired operating language for the camera.
Beep sound
|
Enable or disable beeps when pressing buttons.
Date / time
|
Set the current date and time.
Car mode
|
Enable car mode to turn on the camera automatically when it detects power.
Wi-Fi SSID
|
Edit the name of the Wi-Fi network.
Wi-Fi password
|
Edit the Wi-Fi password.
Delete
|
Delete current or all pictures and videos except for protected files.
Protect
|
Protect current or all pictures and videos.
Format
|
Delete all files on the microSD card.
Default setting
|
Return all settings to manufacturer defaults.
Version
|
View the version of the software.
Transfer files to external device.
Connect the camera to your device with the micro USB cable. Transfer files you want to save to your device.
Alternatively, take the microSD card from your camera and insert it into a card reader that is connected to your device.
Use with N-go 4K App
Use the N-go 4K App on your mobile device to review images and videos, transfer them to your mobile device, take pictures, record video, toggle picture and video modes and change settings.
The app works best with iPhone or Android version 8.0 and up.
- Switch on your camera. Press UP to activate Wi-Fi.
- Install and open the N-go 4K App. Select Wi-Fi network N-Go 4K. Enter password 12345678 to connect.
Once the connection is established, you see the live view of the camera. You can now control the camera with the app.
- Tap the record button in the bottom to start or stop recording a video.
- Tap the camera button to take a picture.
- Tap the slow motion button to record a slow motion video.
- Tap the media gallery button in the bottom left to review, delete or download pictures and videos to your mobile device.
- Tap the settings icon in the bottom right to enter the setup menu.
When you are done, press UP on the camera to return to the video or picture mode.
View pictures and video images on external device
- Ultra HD cable is not included.
To view the pictures and video images on a TV or monitor without transferring any files, connect the camera with an ultra HD cable to the external device.
Maintenance
Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product ACAM41BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/ACAM41BK#support
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>