SEGWAY Ninebot One S2 Monowheel Electric Unicycles User Manual

User Manual
Original Instructions

Welcome
Thanks for choosing the Ninebot One S2!
To enjoy the many features of your Ninebot One S2 you must read and follow these instructions.
Enjoy your ride!All figures in this manual are for reference only, and are subject to the actual product.

Riding Safety

1. The Ninebot One S2 is a recreational transporter. Before mastering riding skills, you need to practice.
   Neither Ninebot Inc. (means Ninebot (Beijing) Tech Co., Ltd. and its subsidiaries and affiliates) nor Segway Inc. is responsible for any injuries or damage caused by a rider’s inexperience or failure to follow the instructions in this document.

2. Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but you cannot eliminate all the risks. Remember that whenever you ride the Ninebot One S2 you risk injury from loss of control, collisions, and falls. When entering public spaces always comply with the local laws and regulations. As with other vehicles, faster speeds require a longer braking distance. Sudden braking on low traction surfaces could lead to wheel-slip or falls. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas.

3. Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with the chin strap in place, and provides protection for the back of your head.

4. Do not attempt your first ride in any area where you might encounter children, pedestrians, pets, vehicles, bicycles, or other obstacles and potential hazards.

5. Respect pedestrians by always yielding the right of way. When approaching a pedestrian from the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from behind, announce yourself and slow down to walking speed when passing. Pass on the left whenever possible.
   Please obey local traffic laws and regulations.

6. In places without laws comply with the safety guidelines outlined in this manual. Neither Ninebot Inc. nor Segway Inc. is responsible for any property damage, personal injury/death, accidents, or legal disputes caused by violations of the safety instructions.

7. Do not allow anyone to ride your Ninebot One S2 on his/her own unless they have carefully read this manual and followed the New Rider Tutorial in the App. The safety of new riders is your responsibility. Assist new riders until they are comfortable with the basic operation of the Ninebot One S2. Make sure each new rider wears a helmet and other protective gear.

8. Before each ride check for loose fasteners and damaged components. If the Ninebot One S2 makes abnormal sounds or signals an alarm, immediately stop riding. Diagnose your Ninebot One S2 via the Segway-Ninebot App and call your dealer/distributor for service.

9. Be alert! Scan both far ahead and in front of your Ninebot One S2 — your eyes are your best tool for safely avoiding obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice).

10. To reduce risk of injury, you must read and follow all “CAUTION” and “WARNING” notices in this document. Do not ride at an unsafe speed. Under no circumstance should you ride on roads with motor vehicles? The manufacturer recommends riders be 16+ years old.
    Always follow these safety instructions:
    A. People who should not ride the Ninebot One S2 include:
    i. Anyone under the influence of alcohol or drugs.
    ii. Anyone who suffers from disease that puts them at risk if they engage in strenuous physical activity.
    iii. Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain balance.
    iv. Anyone whose weight is outside the stated limits (see Specifications).
    v. Pregnant women.
    B. Riders under the age of 18 years old should ride under adult supervision.
    C. Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws.
    D. To ride safely, you must be able to clearly see what is in front of you and you must be clearly visible to others.
    E. Do not ride in the snow, in the rain, or on roads that are wet, muddy, icy, or that are slippery for any reason.
    Do not ride over obstacles (sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and could cause a fall.

11.  Do not attempt to charge your Ninebot One S2 if it, the charger, or the power outlet is wet.

12. As with any electronic device, use a surge protector when charging to help protect your Ninebot One S2 from damage due to power surges and voltage spikes. Only use the Segway-supplied charger. Do not use a charger from any other different product models.

13. Use only Ninebot or Segway-approved parts and accessories. Do not modify your Ninebot One S2. Modifications to your Ninebot One S2 could interfere with the operation of the Ninebot One S2, could result in serious injury and /or damage, and could void the Limited Warranty.

 Product and Accessories

When unpacking your Ninebot One S2, please verify that the above items are included in the package. If you are missing any components, please contact your dealer/distributor or visit the website: www.segway.com. Please retain the box and packaging materials in case you need to ship your Ninebot One S2 in the future.

Diagram

Carry Mode

Carry Mode prevents the wheel from spinning when you lift your vehicle by the handle while it is powered on. With carrying Mode, you can step off your vehicle, carry it across or around obstacles, then put it down and continue riding — all without having to turn off your vehicle.
You can enable/disable Carry Mode in the App.
WARNING
Do not lift your vehicle by the handle when the vehicle is powered on when Carry Mode has been disabled. Doing so will cause the wheel to spin, and may result in personal injury or damage to your vehicle.

Charging

Turn off your vehicle before charging.
WARNING
Do not connect the charger if the charge port or charge cable is wet.
When charging, press the power button to enable a visual display of the charge level.
Your vehicle is fully charged when the LED on the charger changes from red (charging) to green (trickle charge).

Battery Charge Level

The battery charge level display appears when the vehicle is kept stationary.
Each pair of lights represents 14% of battery life. When the batteery
Use the App to read the remaining power and estimated remaining range.
As the power level decreases, your vehicle will gradually reduce the speed limit.

 First Use

There are safety risks when learning to ride the Ninebot One S2. You must read the Safety Instructions and follow the New Rider Tutorial in the App before your first ride.
For your safety, your Ninebot One S2 is not activated at this time and will beep occasionally after Power ON. Until activated, the Ninebot One S2 maintains a very low riding speed and steering sensitivity, and should not be ridden. Install the App on your mobile device (with Bluetooth 4.0 or above), connect to the Ninebot One S2 with Bluetooth, and follow the App instructions to activate your Ninebot One S2 and follow the training procedures.
Scan the QR code to download the App
(iOS 9.0 or above, Android™ 4.3 or above).

http://app.ninebot.cn/

1. Install the App and register/log in.

2. Hold the vehicle upright and power it on.
   Turn it off and on again to familiarize yourself with the controls.

3. Click “Search Device” to connect to your vehicle.
   The vehicle will beep to indicate a successful connection.

4. Follow the instructions in the App.

Learning to Ride

Rider must weigh 88–330 lbs (40–150 kg) and must be 4’3″–6’6″ (130–200 cm) tall.

Wear an approved helmet and other protective gear to minimize any possible injury.
After activation, the App will lead you through the New Rider Tutorial. Please follow the instructions in the App and in this manual.
NOTE
You must first download the Segway-Ninebot App on your mobile device. The App will lead you through the New Rider Tutorial.
For your safety, the Ninebot One S2 will limit the max speed to 4.3 mph (7 km/h) until you complete the New Rider Tutorial. For the first 0.6 miles (1 km) after completing the New Rider Tutorial, the max speed will be limited to 12.4 mph (20 km/h), after which you can disable the speed limiter and reach a maximum speed of 28 mph (45 km/h).

1. Put one foot on the pedal, and move the vehicle back and forward.
   

2. Place one foot on the pedal, keep your legs and body upright, and gradually mmove the center of your body weight up.
   

3. Place one foot on the pedal, raise the other off the ground for 1–2 seconds, and slide forward.

4. Place one foot on the pedal, push the other foot down on the ground, and slide forward.

5. Place both feet on the pedals anddirect the vehicle by adjusting your center of gravity.
   

6. Turn by shifting your weight onto the foot.

Warnings
You must read and understand the Warnings and Riding Safety instructions in this manual before attempting to ride the Ninebot One S2. Failure to follow these warnings could result in death or serious injury due to: loss of balance, traction, and/or control; collisions; and falls.

**** When traversing small bumps or uneven terrain, maintain a moderate speed of 2-6 mph (3-10 km/h) and keep your knees bent. Do not go too slow or too fast; otherwise you may lose control and fall.

**** Watch your head when passing through doorways.

**** Avoid slopes steeper than 15° or you may lose traction.

Do not accelerate or decelerate abruptly.
You must read and understand the Warnings and Riding Safety instructions in this manual before attempting to ride the Ninebot One S2.

**** Do not ride on public roads, motorways, highways, or streets.

Do not accelerate when the Ninebot One S2 tilts back or sounds an alarm.  Do not attempt to override the speed limiter. Do not ride through puddles or other bodies of water. Do not get wet. The Ninebot One S2 is for one rider only. Do not ride double or carry any  passengers. Do not carry a child. Do not ride when pregnant. Do not ride over holes, curbs, steps, or other obstacles.

Do not rock back and forth or shift your weight abruptly.

Do not attempt stunts of any kind. Always keep both feet on the foot mats.

Maintain contact with the ground at all times. Do not jump or attempt stunts.| Do not ride on limited traction surfaces.

Daily Maintenance

Cleaning and Storage
Use a soft, wet cloth to wipe the mainframe clean. Hard to remove dirt can be scrubbed with a toothbrush and toothpaste, then cleaned with a soft, wet cloth.
NOTE
Do not wash your Ninebot One S2 with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your Ninebot One S2. Do not wash your Ninebot One S2 with a power washer or hose.
WARNING
Make sure the Ninebot One S2 is powered OFF, the charging cable is unplugged, and the rubber cap on the charge port is tightly sealed before cleaning; otherwise you may damage the electronic components. Store your NinebotOne S2 in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight and extreme temperature (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life.
Battery Pack Maintenance
Do not store or charge the battery at temperatures outside the stated limits (see Specifications).
Do not puncture the battery. Refer to your local laws and regulations regarding battery recycling and/or disposal. A well maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid draining the battery completely. When used at room temperature (70°F [22°C]) the battery range and performance is at its best; whereas using it at temperatures below 32°F (0°C) can decrease range and performance. Typically, at -4°F (-20°C) range can be half that of the same battery at 70°F (22°C). Battery range will recover when temperature rises. More details are available in the App.
NOTE
Typically, a fully charged battery should retain charge for 120-180 days. A low-power battery should retain charge for 30-60 days. Remember to charge the battery after each use. Completely draining the battery may cause permanent damage to the battery. Electronics inside the battery record the charge- discharge condition of the battery; damage caused by over-charging or under- charging will not be covered by the Limited Warranty.
WARNING
Do not attempt to disassemble the battery. Risk of fire. No user serviceable parts.
WARNING
Do not ride when the ambient temperature is outside the machine operation temperature (see Specifications) because low/high temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls.

Removing Battery Pack

The standard Ninebot One S2(with a capacity of 310 Wh) has two battery packs, one on either side. You can remove one battery pack to limit speed and mileage, and reduce the weight of the Ninebot One S2. Removing one pack limits the speed to 18km/h, the mileage to around 15km, and the weight of the vehicle to about 11.5kg.
(Mileage will vary with the user’ s weight, temperature, road conditions, and so on. )
Removing a battery pack can be dangerous. Turn to our after-sales service or your distributor and do not attempt to remove the battery back by yourself.

After powering off the vehicle, open the soft rubber plug on the left side of the vehicle (as shown in the figure, above the pedal), and unscrew the Philip’s screw on both sides.| As shown in the figure, use your finger to open the battery cover from the bottom up using the gap in the middle. Use a screwdriver if necessary.| Release the black Awire first, and then release the yellow B wire. To do so, pull the plug firmly, but don`t pull on the wire directly or you may damage it.

When unscrewing the four screws in the four corners of the battery, do not press too hard because
you may damage the battery.| As shown in the figure, push the top snap into place first, and then press the housing.| Tighten the screws, and install the soft rubber plug.

Specifications

| Item| Nlnebot One S2 Parameters
---|---|---
DimensionsVehicle| Size| 17.6 x 16.6 x 7.2 in (448 x 419 x 189 mm)
Weight| Max. Payload| 264 lbs (120 kg)
Net Weight| 25 lbs (11.4 kg)
Rider Requirements| Age| 16-50 years
Height| 4′ 0″-6′ 6″ (120-200 cm)
Machine Parameters| Max. Speed| 14.9 mph (24 km/h)
Typical Rangel| -18 miles (-30 km)
Max. Slope| -15°
Beginner Mode| Beginner mode is automatically deactivated after 0.6 miles
(1 km) of riding. Enable beginner mode at any time via the App.
Traversable Terrain| Pavement. packed dirt. slopes < 15°. obstacles < 1.2 inches (3 cm). gaps < 1.2 inches (3 cm).
Operating Temperature| 14-104°F (-10-40°C)
Storage Temperature| -4-122°F (-20-50°C)
IP Rating| IPX4
Battery| Type| Li-ion battery pack
Nominal Voltage| 54.3 VDC
Max. Charging Voltage| 63 VDC
Charging Temperature| 32-104°F (0-40°C)
Nominal Capacity| 310 Wh
Battery Management System| Over-voltage. under-voltage. short circuit. and over-heating protection. Auto-sleep and auto-wake.
Motor| Nominal Power| 500 W
Max. Power| 1000 W
Display| Lighting| Ring type display panel on both sides. with 14×2 independent RGB LEDs. battery level display. and customized light patterns.

Typical Range: tested while riding under full power, with 154 lbs (70 kg) load, at 77°F (25°C), and an average speed of 9.3 mph (15 km/h) on level pavement. Range varies with payload, environment,  temperature, road conditions, and other variables.

 Certification

European Union Compliance Statement
Battery recycling information for the European Union
Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC and amendment 2013/56/EU concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per the Directive.
In accordance with the European Directive 2006/66/EC and amendment 2013/56/EU, batteries and accumulators are labeled to Indicate that they are to be collected separately and recycled at end of life. the label on the battery amy also include a chemical symbol for the metal concerned in the battery (Pb for Lead, Hg for mercury, and Cd for Cadmium), Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and treatment of batteries and accumulators. Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances.
Before placing electrical and electronic equipment (EEE) in the waste collection stream or in waste collection facilities, the end user of equipment containing batteries and/or accumulators must remove those batteries and accumulators for separate collection.
Waste Electrical and Electronic Equipment (WEEE) Directive
“All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points”.
Restriction of Hazardous Substances Directive (RoHS)
This Ninebot (Tianjin) Tech Co., Ltd. product, with included parts (cables, cords, and so on) meets the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment ( “RoHS recast” or “RoHS 2” ).
Radio Equipment Directive (RED)
Segway Europe B.V.
EU Contact Address for regulatory topics only: Hogehilweg 8, 1101CC, Amsterdam, The Netherlands This device meets the EU requirements on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
Hereby, [Ninebot (Tianjin) Tech Co., Ltd,] declares that the radio equipment type [One S2] is in compliance with Directive 2014/53/EU.

Trademark and Legal Statement

Ninebot is registered trademark of Ninebot (Tianjin) Tech. Co., Ltd; Segway is registered trademark of Segway Inc. The respective owners reserve the rights of their trademarks referred to in this manual. © 2019 Ninebot (Beijing) Tech Co., Ltd. All rights reserved.
The Ninebot One S2 is covered by relevant patents. For patent information go to http://www.segway.com. We have attempted to include descriptions and instructions for all the functions of the Ninebot One S2 at the time of printing. However, due to constant improvement of product features and changes of design, your Ninebot One S2 may differ slightly from the one shown in this document.
Please note that there are multiple Ninebot models with different functions, and some of the functions mentioned herein may not be applicable to your unit. The manufacturer reserves the right to change the design and functionality of the Ninebot One S2 product and documentation without prior notice.
Manufacturer
Ninebot (Tianjin) Tech Co., Ltd.
Address: Building 14, No. 3, Tianrui Rd, Auto Industrial Park, Wuqing Dist., Tianjin, China

Contact

Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your Ninebot One S2 .
Segway Europe B.V.
Hogehilweg 8, 1101CC Amsterdam, The Netherlands
Website: www.segway.com
Have your Ninebot One S2 serial number on hand when contacting Segway.
You can find your serial number on the underside of your Ninebot One S2 or in the App under More Settings –> Basic Information.

The manufacturer reserves the right to make changes to the product, release firmware updates, and update this manual at any time. Visit www.segway.com or check the Segway-Ninebot App to download the latest user materials. You must install the Segway-Ninebot App, activate your Ninebot One S2, and obtain the latest updates and safety instructions.

www.segway.com

References

• Register a .EU.COM domain today!
• Home | Segway

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>