BORMANN BVC3200 Elite Rechargeable Cordless Handheld Vacuum Cleaner Instruction Manual
- June 5, 2024
- BORMANN
Table of Contents
BVC3200 Elite Rechargeable Cordless Handheld Vacuum Cleaner
Instruction Manual
Safety Instructions
- Please be sure to carefully read the manual first before using the product.
- Please be sure to keep the manual properly so that you could check anytime in the future.
- Please correctly use it on the basis of fully understanding its contents.
- This product is an electrical product. Please pay attention to electric shock hazards.
- If the power wire is damaged or there exists other obvious damage, please stop using the product. Please don’t dismantle the product cap by yourself. Instead, it is necessary to ask professional maintenance personnel to repair it. The battery set is not allowed to open. Only professionals could conduct such an operation.
- The damp-proofing measures should be taken for the product and charger in order to prevent electric shock.
- Please don’t use the device for vacuuming in the burning ash, cigarette end and match, or the apex-head materials, glass cullet, water, or other kinds of liquid. Because the act may damage the vacuum cleaner and possibly endanger personal security. The burning ash and cigarette end etc. may make the internal filter layer and some parts ablaze. Damp may lead to a short circuit. The sharp object may damage the filter layer.
- Please make sure that children are away from the packaging materials in order to prevent the asphyxiation hazard.
- Please use the charger provided or other chargers with the same technical parameters, otherwise, the hazards may be caused.
- The charger should be disconnected when the product is in use.
- If there exists obvious damage to the product itself or charger and power wire, or the product is thrown away, please don’t use the product.
- Please don’t expose the vacuum cleaners to extreme weather conditions (For example, in the rain). When cleaning a vacuum cleaner or conducting any maintenance (For example, replacing the filter screen), one should turn off the power or pull out the attaching plug-in vacuum cleaner socket.
- Please be careful when you store the power wire of the charger. Avoiding any damage to the power wire. If it is damaged in any way, please replace it as soon as possible.
- Please make children away from the electrical product during use as the children cannot recognize the danger.
- Although there is a filter screen, the product may still discharge a small amount of dust. If it is inhaled into the mouth cavity by young children, anaphylaxis would be caused. If possible, please make children away from the product during use.
- Please don’t sit or stand on the vacuum cleaner.
- Ensuring that the vacuum cleaner is used under the circumstance that the filter screen and dust-storage chamber are placed correctly. It is necessary to ensure that the filter screen would not be damaged. Please don’t place any articles at the air outlet of the product.
- Please don’t put the product near a heat source or oven.
- If the product is delivered to a third party for use, please make sure that the manual is attached.
Main Parts
Technical Data
| Power | 90W |
|---|---|
| Battery type | 14.8V 2200mAh Li-ion |
| Filter Type | Metal HEPA |
Description of main parts
Flat nozzle
The flat nozzle is suitable for cleaning the fabric gap, wall crack, and
corner, or the slit difficult to process. During the installation of the flat
nozzle, the tail should be inserted at the suction port of the product until
it is installed in place.
Oval brush
The use of an oval brush could clean the book or some small objects, such as
the frame, lamp shade, keyboard, etc. During the installation of the oval
brush, the tail should be inserted at the suction port of the product until it
is installed in place.
- The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
- Please note that our equipment has not been designed for use in commercial, trade, or industrial applications. Our warranty will be voided if the machine is used in commercial, trade, or industrial businesses or for equivalent purposes.
- To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair, or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
Prior to operation
Attaching and removing the battery
- Press the battery holder release button to pull out the battery holder backward
- Put the battery holder in the neck and push the battery holder to the bottom
Caution:
Please ensure that the charger plug is unplugged in the socket before
installation or disassembly of the product or its parts.
Battery charging
Directly connect the machine with a charger for charging.
- Then the charger would be inserted into the plug socket (100-240V-50/60Hz).
- The indicating lamp’s gradually increasing indicates that the attaching plug is correctly connected with the charger and it is in a charging process.
It could be fully charged after 3.5-4 hours around.
Caution:
Please use the charger attached or other chargers with the same technical
parameters in order to prevent any hazards. In order to reach up to the
maximum charging capability of the battery, please try to fully charge the
battery before the first use of the battery.
Operating Instructions
Starting switch button to operate
- Please clean the dust cup empty and tidy before each use.
- Keep pressing the switch button for 1 second to switch on the machine to make the vacuum cleaner operate.
- Press the switch button again to turn off the switch so as to break down the vacuum cleaner.
Cleaning the device
Turn off the switch of the vacuum cleaner, unplug the charger from the socket,
and then clean the engine body.
Caution:
Please don’t expose vacuum cleaners to extreme climate conditions (For
example, in the rain).
If necessary, the wet cloth could be used to clean the engine body, dust,
filter screen, and parts.
Ensuring that there is no liquid flowing into an internal vacuum cleaner.
Please don’t place the parts in the dishwashing machine for cleaning.
Please don’t use the grinding-type cleanser (Detergent, diluent) as it could
damage the synthetic surface of the engine body.
Ensuring that the charger plug is inserted in the hole after complete air
drying of all the parts of the vacuum cleaner.
Cleaning up dust cup and filter screen
Please clean the dust cup empty and tidy after each use. A bag suggests being
used to pour dust into it when the dust cup is filled with dust, which may
prevent dust from flying out. The charger should be disconnected from the
vacuum cleaner during cleaning vacuum cleaner.
-
Shutting off the switch button to stop the operation of the vacuum cleaner.
-
Holding the charging vacuum cleaner (It is better to hold the handle position) to make the dug-storage chamber face down. The dust-block film inside the suction port would prevent dust from leaking out at the suction port. Press the dust cup release button to move the dust cap from the engine body so as to complete the corresponding disassembly.
-
Taking out the dust cup. It is better to pour it into the garbage can to clean it empty.
-
Beating filter screen and cleaning it up, then using fresh water to clean dust cup and filter screen, and waiting for air drying.
Caution:
Use fresh water to clean the dust cup and filter screen. Please don’t use soap and other cleansers, otherwise, the filter screen may be damaged. If the filter screen or dust cup is damaged, they should be replaced as soon as possible. -
The dust cup could be placed in the filter screen again and installed after it is cleaned empty and air drying.
Reinstalling the filter screen in the dust cup
Firstly insert the engine body part at the opening of the dust cup tail to
connect. Press the locking button until the dust cup is installed in place.
WWW.BORMANNTOOLS.COM
V2.1
Documents / Resources
|
BORMANN BVC3200 Elite Rechargeable Cordless Handheld Vacuum
Cleaner
[pdf] Instruction Manual
BVC3200, Elite Rechargeable Cordless Handheld Vacuum Cleaner
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>