brennenstuhl HL DA 61 MH 6 1 LED Rechargeable Multi Function Light Instruction Manual
- June 5, 2024
- brennenstuhl
Table of Contents
Operating instructions
6+1 LED Rechargeable Multi-Function
Light HL DA 61 MH with charging station
SAFETY INFORMATION
- Read the operating instructions carefully before using the lamp.
- Do not use it if the lamp or the power adapter are damaged – danger to life! Contact a qualified electrician or the service department listed.
- Do not look directly at the lamp.
- Do not open the device.
- Do not use the lamp in potentially explosive atmospheres – danger to life!
- Only use the included charging station with the charger to charge the lamp or charge it directly on the lamp using a tested USB charger.
- During the charging process, the product is not IP54-compliant (dust-protected and protected against splashing water).
OPERATION:
-
Drain the battery completely and recharge before using the lamp
for the first time. -
Front switch 1 :
Push once: top LED On /
push twice: front LEDs On /
push three times: all LEDs are Off. -
The product can be used during charging.
-
Status LED 4 : the green bar for the respective charging status blinks while charging; all remain green when the battery is charged.
-
If the lamp is not used for an extended period of time, it is recommended that the battery be charged every 3 months.
OVERVIEW OF THE CONTROLS:
- On / Off switch
- Front LEDs
- Lamp head LED
- Charging indicator (green)
- Charging status switch
- F Charging port lamp
- Charging station
- Charging station charging port
- USB power supply unit 230 V
- USB charging cable
CHARGING
-
with charging station and 230 V charger:
Place the lamp in the charging station 7
USB power supply unit 230 V 9 – USB charging cable 10 – Charging station 8
The hand-held lamp is fully charged when the charging display LED on lamp 4 remains green -
directly with a USB cable (from a tested USB power source):
USB charging cable 10 – Lamp charging port 6
SPECIFICATIONS:
LEDs:
Flux:
Light color:
Battery:
Operating time:
Charging time:
Protection class:
Temperature range:|
Front 6x SMD, head 1x SMD
Front 280 I ‘m/head 70 lm
6000 K
Integrated, Li-ion 3.7 V/2.0 Ah
Front 3 hrs, head 8 hrs
3 hrs
IP 54
-10 °C – +40 °C
---|---
Power Adapter:
Model identifier:
Input voltage:
Input AC frequency:
Output voltage:
Output current:
Output power:
Average active efficiency:
Efficiency at low load (10 %):
No-load power consumption (Standby):| ICY0500-1000WU
100 – 240 V
50 – 60 Hz
5,0 V
1,0 A
5,0 W
75,40 %
69,01 %
0,06 W
---|---
EU DECLARATION OF CONFORMITY
The declaration of conformity is deposited with the manufacturer.
DISPOSAL
Dispose of electric appliances in an environmentally friendly manner!
Electric appliances must not be disposed of in household waste!
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment
rules that used electric appliances should be collected separately and
recycled in an environmentally friendly manner.
For possibilities of disposal of the used appliance, please contact your local
or municipal administration.
Batteries and accumulators must not be disposed of in the household
waste!
As a consumer, you are legally obliged to hand in all batteries and
accumulators at a collection point in your community/ urban district or in the
trade, so that they can be disposed of in an environmentally friendly manner,
otherwise, there are possible risks to the environment and human health.
MANUFACTURER
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1 – 3 · D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim lectra technik ag
Blegistrasse 13 · 6340 Baar
For more information, we recommend the Service/FAQs section on our homepage
www.brennenstuhl.com.