et2 E24874 3-Light LED Pendant User Manual
- June 5, 2024
- ET2
Table of Contents
et2 E24874 3-Light LED Pendant
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Risk of suffocation: Keep any packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
- WARNING: Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur.
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.Periodically (every 90 days) make sure that the screws are fully tightened.Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Before getting
Started,ensure the package contains the following components:
**
**CRITICAL
INSTRUCTION
This fbcture must be Installed with compatilble dimmer types only. Improper wirlng of fxhure and/or use of Incomect dimmere will cause catastophlc falure and vold the waranty.
E24874
SCHEMATIC FOR GENERAL REFERENCE ONLY WARNING:
Do not cut factory connections. Dolng so may vold Warrany.