kogan NBOTLTFL20A Outdoor Festoon String Light User Guide
- June 5, 2024
- Kogan
Table of Contents
Outdoor Festoon String Light
User Guide
OUTDOOR FESTOON
STRING LIGHT – 20M
WITH LED FILAMENT BULBS
NBOTLTFL20A, NBOTLTFL2BA
SAFETY & WARNINGS
Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference.
- Ensure the power cord is unplugged before installing, connecting, or when replacing the LED filament bulbs
- Ensure the power cord is unplugged when servicing the string light.
- CAUTION: Do not replace the LED filament bulbs during rain or when the string light is wet.
- WARNING: To prevent breakage during windy conditions, install the bulbs far enough apart to prevent them from hitting each other.
- If using extension cords, do not use them near water.
- To prevent the risk of electric shock, do not submerge the string lights into water. ]
- The voltage of this string light is 220-240V. Ensure the power socket used matches this voltage.
- Keep the power cord in a dry place.
- To prevent damage or abrasion, do not expose the string light to the edges of sheet metal or other sharp objects.
- Cover empty lightbulb sockets and the ends of the string light with caps to limit corrosion and wear and tear.
- If connecting multiple string lights together, do not exceed a combined power of 700W and/or reach a length of 200m.
- If connecting multiple string lights together, ensure there is support near the power socket to prevent the power cord from being pulled out.
COMPONENTS LIST
- String light (x1)
- LED filament bulb (x20)
- Cap (x2)
- Power cord (x1)
- User guide (x1)
INSTALLATION
Step 1: Arrange the string light to your liking.
It can be arranged on the surface or be secured using additional fixings sold
separately (nails, cup hooks, zip ties, or guide wires).
Step 2: Twist and secure the LED filament bulbs to the string light.
Step 3: Place a cap over the female end of the string light. This will limit corrosion and wear and tear on the end of the string light.
Note:
If you will be connecting two or more string lights together, skip this step
and do not place a cap onto this string light.
Step 4: Connect the male end of the string light to the power cord and
connect the power cord to a socket. Switch the power on.
Connecting two or more string lights
To connect two or more string lights, follow the steps and diagram below.
- Connect the male end of string light 1 to a power cord.
- Connect the female end of string light 1 to the male end of string light 2. Continue connecting additional string lights the same way (female to male). Place a cap at the male end of the last string light.
- Connect the power cord to a socket and switch the power on.
Note: Do not exceed a combined power of 700W and/or reach a length of 200m.
SPECIFICATIONS
Power | 220-240V |
---|---|
Socket | E27 (Edison bulb, 27mm) |
Wattage | 2W per bulb |
Length | 20m |
Need more information?
We hope that this user guide has given you the assistance needed for a simple
setup.
For the most up-to-date guide for your product, as well as any additional
assistance you may require, head online to
help.kogan.com