Kogan KAFXIDIP3MA SMARTER HOME 2K INDOOR SECURITY CAMERA PRO User Guide
- June 5, 2024
- Kogan
Table of Contents
Kogan KAFXIDIP3MA SMARTER HOME 2K INDOOR SECURITY CAMERA PRO User Guide
COMPONENTS
OVERVIEW
MOUNTING
Stick one side of the included adhesive tape to the middle of the base of the camera.
Prepare the intended mounting surface, ensuring it is clean and dry. Peel the other side of the adhesive tape, and firmly press the camera onto the surface. If mounting upside down, ensure the camera settings are configured to flip the video (see Functions page).
CONNECT TO SMARTERHOMETM APP
Install App
Download the “Kogan SmarterHome” app from the Play Store (Android) or App
Store (iOS).
Register
If you do not have a Kogan SmarterHomeTM account, register or sign in with a
verification code sent by SMS.
To register:
-
Tap to enter registration page.
-
The system automatically recognises your country/area. You can also select your country code manually. Enter your email address or mobile number and tap `Next.’
-
A verification code will be sent to you by email or SMS. Enter the code to confirm.
-
Create a profile on the next page to define your location and room.
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the red light will be blinking).
If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by resetting the device. Using the supplied Reset Pin, press and hold the ‘RESET’ button for 5 seconds to reset the device. Once reset, the red light will begin to flash.
Add device through network -
Once registered, tap “+” in the upper right corner of the app’s home page to add a new device through the network.
-
Select the product type from the list of options in the app (Home Security > Cameras).
-
Ensure that the device is in pairing mode, with the red light flashing, and tap “Confirm light is rapidly flashing”.
-
Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.
-
Calibrate the smart camera by holding your smartphone 15-20cm away from the camera lens until it successfully scans the QR code shown on the following screen of the setup. The device will make a Prompt sound to confirm, click “I heard a prompt” to proceed to the next screen.
-
The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete.
-
After successfully being added, you will have the option to rename the device and assign it to a location. It will now be listed on the app’s home page. Tap the device listing to enter its control page.
Notes:
- The device and the app have to use the same Wi-Fi network.
- The device is only compatible with 2.4Ghz networks.
- Ensure the number bits in the SSID and password of the router do not exceed 24 digits.
GOOGLE HOME CONTROL
Note: You will need to have set up a Google Home account prior to linking your Kogan SmarterHome™ device.
Adding “SmarterHome” to the Google Home app
-
From the home page of the Google Home app, select the “+” icon to access the `Add and manage’ page.
-
Select
Set up device’, then under the Works with Google banner, selectHave something already set up?’ -
Select the search bar and type `Smarter Home’ to locate the Kogan SmarterHome™ service.
-
Tap `Authorise’ to grant Google permission to access the SmarterHome™ app and your devices.
-
From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
-
Once connected, the app will display any compatible devices linked to your SmarterHome™ account. From here you can assign them to rooms and set up any routines.
-
Tap on any of the devices to view a list of available commands.
Note: Please note that Google Home can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
AMAZON ALEXA CONTROL
Note: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome™ device.
Adding “SmarterHome” to the Alexa app
-
From the home page of the Alexa app, select the ” ” icon in the top-right and select Skills & Games from the sidebar.
-
Select the search bar and type `Smarter Home’ to locate the Kogan SmarterHome™ skill.
-
Tap `Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa.
-
From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
-
Tap `Authorise’ to grant Alexa permission to access the SmarterHome™ app and your devices.
-
Once connected, the app will perform a search and display the devices linked to your SmarterHome™ account.
-
When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands.
Note: Please note that Alexa can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
FUNCTIONS
Settings
In the Smart Camera interface, click ” ” in the top right corner to set the
camera common functions.
Video flip
Flip your video stream vertically. This is useful if you’ve mounted the camera
upside down.
Motion detection
Smart motion detection will send push notifications to your smartphone once
abnormal movement is detected.
Record
Record every moment using microSD card storage (max. 128GB).
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
TROUBLESHOOTING
NOTES____
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require,
head online to help.kogan.com