TOOLCRAFT 2481637 Portable LED Work Light Instruction Manual
- June 3, 2024
- Toolcraft
Table of Contents
2481637 Portable LED Work Light
Instruction Manualhttp://www.conrad.com/downloads
Portable LED Work Light
Item no: 2481637
Intended use
The product is a portable LED work light with a rechargeable battery.
The product has an IP65 ingress protection rating and is protected from dust
and low-pressure water jets from any direction. The product is suitable for
outdoor use. Do not submerge the product in water.
If you use the product for purposes other than those described, the product
may be damaged.
Improper use can result in short circuits, fires, electric shocks or other
hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the
product.
Read the operating instructions carefully and store them in a safe place. Make
this product available to third parties only together with the operating
instructions.
All company names and product names are trademarks of their respective owners.
All rights reserved.
Delivery contents
- Product
- USB-A to DC jack charging cable
- Operating instructions
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Description of symbols
| The symbol warns of hazards that can lead to personal injury.
---|---
| This product is constructed according to protection class III.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions that remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications, and repairs must only be completed by a technician or an authorised repair center.
5.2 Handling
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
5.3 Operating environment
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
- Protect the product from direct sunlight.
5.4 Operation
- Consult an expert when in doubt about the operation, safety or connection of the product.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. The safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Li-ion battery
- Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause an explosion or a fire!
- Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product into fire. There is a danger of fire and explosion!
- Charge the rechargeable battery regularly, even if you do are not using the product. Due to the rechargeable battery technology being used, you do not need to discharge the rechargeable battery first.
- Never charge the rechargeable battery of the product unattended.
- When charging, place the product on a surface that is not heat-sensitive. It is normal that a certain amount of heat is generated during charging.
5.6 LED light
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
- Looking into an LED light in the darkness can cause temporary blindness. This can be dangerous in high-risk environments.
5.7 Connected devices
- Also, observe the safety and operating instructions of any other devices which are connected to the product.
5.8 Ingress protection
The product has an IP65 ingress protection rating and is protected from dust
and low-pressure water jets from any direction. The product is suitable for
outdoor use. Do not submerge the product in water.
Operation Important:
- To protect the IP65 ingress protection rating, make sure the port cover forms a good seal when closed.
6.1 Charging the battery
Important:
Before connecting, make sure that the USB power source can deliver sufficient
current, otherwise, you may damage the source.
Important:
Fully charge the battery before first use and before storage.
- The light will go OFF when the battery needs to be recharged.
- Recharge the battery using the included charging cable
- The indicators will blink during charging. If the indicators do not light up during charging, disconnect and then reconnect the charging cable
Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical
solutions. They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
- Disconnect the product from the power supply.
- Clean the product with a dry, fiber-free cloth. Moisten the cloth if needed.
Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed
of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and
accumulators, which are not enclosed by the WEEE, as well as lamps that can be
removed from the WEEE in a non-destructive manner, must be removed by end
users from the WEEE in a non-destructive manner before it is handed over to a
collection point.
Distributors of electrical and electronic equipment are legally obliged to
provide free take-back of waste.
Conrad provides the following return options free of charge (more details on
our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.
Product
This product contains a light source of energy efficiency class F.
Input …………………………………… 5 V/DC, 1 A
Power …………………………………… 10 W
Rechargeable battery ……………….. 3.7 V 5200 mAh Li-Ion
Battery recharge time ………………….. approx. 7 hrs
Operating times ……………………………. Low: 8.5 hrs, Medium: 4 hrs, High: 2 hrs
Protection class …………………………….. III
Color Temperature ………………………. 6500 K
LED…………………………………………. 1 pc COB
Lumen………………………………….. max. 1100 lm
Low: 250 lm, Medium: 500 lm, High: 1100 lm
Ingress protection …………………………. IP65
Operating conditions………………………. -10 to +40 °C
Storage conditions…………………………… -20 to +50 °C
Dimensions (W x H x D) ………………….. 185 x 165 x 47 mm
Weight ……………………………………………. 674 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming, or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2481637_V1_0522_dh_mh_en 9007199785221259-2 I2/O1 en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>