Switchmate Snap-On Instant Smart Light Switch Manual
- June 8, 2024
- Switchmate
Table of Contents
Installation
1
Install two AA batteries into back
of Switchmate.
2
Snap Switchmate onto your existing
light switch with the light switch and the
Switchmate in the “up/TOP “ position.
It attaches instantly with the imbedded
magnets, no tools or wiring required.
3
Download the Switchmate App
from the Google Play or Apple App
Store onto your phone.
4
Launch the App and follow the few
simple steps to connect and activate
your Switchmate in seconds.
(a) Tap the “Start” button.
(b) Tap the “Walk me through
the install” icon and simply
follow the simple steps to
activate your Switchmate.
5
Test Switchmate both manually at
the light switch and using the App.
Due to variations in the effective range of
Bluetooth technology, there may be a 2-4
seconds response time from the wall switch.
note that a small percentage of rocker
switches require the utilization of an adaptor
to activate correctly. Simply attach the
adaptor included as shown in this graphic
below and snap Switchmate back onto the
switch. If that is still not working properly,
be sure that the screws that hold your light
switch plate to the wall are fully tightened.
Hello
Thank you fir purchasing Switchmate.
We are excited to bring of mind into your home.
Timer
Schedule when you want your lights to
turn on or off and have this on repeat.
Reverse
Press Reverse if Switchmate on/off foes
not match your light switch on/off position.
Close Range
Let your light welcome you home when you within
range of Switchmate.
Battery Life
View your Switchmate’s battery life and receive
alerts when it’s time to change the batteries.
Manual Press
Use the Switchmate as a manual lightswitch
by pressing the center button.
Flexibility
Bring the settings with
you wherever you go.
Welcome Home Feature
For iOS devices
-
Within the Switchmate app, select
your desired switch to add this feature -
Select Welcome
-
Set Start/Stop Time (ensure toggle is in “On” Position)
-
To disable feature, slide toggle to off position
For Android devices
-
Within the Switchmate App, select
your desired switch to add this feature -
Select Welcome
-
Set Start/Stop Time and Exit out
of this feature to save setting -
To disable feature, slide toggle to off position
if you have multiple switches within
30 feet, we suggest that you only
enable Welcome Home Feature on
one of those switches.
Package Contents
1x
Switchmate, rocker or toggle version
2x
AA Batteries
2x
Quick Start Guides
1 English
1 French and Spanish
*Only for rocker version
1x
Rocker Adapter, one pre-installed
Switchmate Snap-On Instant Smart Light Switch Manual – Optimized
PDF
Switchmate Snap-On Instant Smart Light Switch Manual – Original
PDF