COSTWAY FP10061US-GR 13lbs Portable Semi-Automatic Twin Tub Wash Machine User Manual

COSTWAY FP10061US-GR 13lbs Portable Semi-Automatic Twin Tub Wash Machine

Before You Start
Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled. Always place the product on a flat, steady and stable surface. Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

Introduction

Thank you for purchasing this Semi Auto Washing Machine. The design of this product has adopted the special patent technology of cabinet integration. The entire body casing is made of plastic and this ensures that your semi auto washing machines will never be rust eaten. The washer is relatively lighter and space saving as compared to other general twin-tub washing machines Through the integration of new technology, this washer with large wave pulsator and new water flow, will not only produce less twisting of the
clothing but also better cleaning and washing effect. The functions of water inlet, sprinkling, spin-dry and water flow are also made available to save time, labor and water usage.
We trust that you will find your purchase of this beautifully designed and dignified-looking semi auto washing machine to your satisfaction.

Technology parameter and specifications

Troubleshooting

Replace the clothes in the tub
There is something jammed between the pulsator and the wash tub| Remove the jammed object(s).
Water leaks from the wash tub| Wash tub was not connected tightly to the hose| Reconnect and tighten the hose
Spin-dry basket does not rotate| The slight switch is in loose contact| Adjust the contactor of the switch
The fixed screw of spin dry basket or shaft coupling is loose| Tighten the screw
The shaft of spin dry basket is twined by the textile| Remove the textile
Brake dragline is loose| Tighten the dragline
The spin tub does not drain| Something had dropped into the space between

spin tub and spin dry basket

| Remove the object

Attention:
When the problem can not be resolved, please contact the Service Center.

Maintenance

After use, pull out the plug to prevent accidents.

• When cleaning the washing machine use a soft cloth, this will prevent scratching of the surface of the cabinet.
  

• Do not put the washing machine outdoors or in damp areas such as the bathroom.
  

• Do not put heavy objects on top of the washing machine.
  

• Do not place the washing machine near to heat-generating items such as  gas cookers

Structure and parts of product

1. spin cap
2. spin tub
3. spin cover
4. water inlet
5. control panel
6. pulsator
7. wash cover
8. cabinet
9. Bottom
10. wash timer switch
11. wash & drain selector switch
12. spin timer switch
13. drain hose
14. power wire
15. back cover

Washing Instructions

Preparation

1. The machine should be placed on the flat ground
2. The plug seat should have safety ground connection.
3. Lay down the overflow hose.
4. Use the water inlet hose to connect the water tap on the water inlet.
5. Adjust the water level based on the type of clothing material and its weight.
6. Turn on the power.

Washing

1. Set the ‘wash & drain selector switch” according to the material type and
   weight of clothes.

2. Set the ”wash& drain selector switch” to the wash position.

3. Set the ”wash timer” and place the clothes into the tub, adjust the water
   level to the proper position and put in the proper amount of detergent into
   the wash tub.

4. Set the ”wash timer” and washing machine will start to wash.

5. After wash, set the ”wash & drain “selector switch to the drain position to
   the start draining off water.

Spinning

1.  After spinning, set the water inlet hose to the water inlet of the spin tub
   position for 20-30 seconds.

2. According to the “spin timer” process, spinning the clothes for
   lmin-5min, repeat once or twice.

Rinsing

1. After spinning, the spin tub will stop. Open the spin cover and from the
   spin tub transfer the clothes to the wash tub to prepare for rinsing.

2. Repeat the washing process but do not add any detergent.

• Attention Points
  

• For your own safety, ensure that the ground connection is correct.
  

• Never put your hands into the spin tub whilst it is working.
  

• Never wash textiles which contain volatile materials to avoid machine damage or water blockage due to stains.
  

• The timer should always be turned clock wise
  

• When abnormal sounds/movements occur during operation, stop the washing machine as soon as possible and check. (Please refer to troubleshooting,
  

• When Washing, Water temperature should be below140°F，Otherwise,the plastic components may be deformed

Electrical Principle

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>