cudy FS1018PS1 16-Port 10 100M PoE+ Switch User Manual

: June 3, 2024
: cudy

Table of Contents

cudy FS1018PS1 16-Port 10 100M PoE+ Switch
Hardware connection
Physical appearance
Warranty Conditions
- EU Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

cudy FS1018PS1 16-Port 10 100M PoE+ Switch

Hardware connection

cudy-FS1018PS1-16-Port-10-100M-PoE-Switch-01

Physical appearance

Front board

cudy-FS1018PS1-16-Port-10-100M-PoE-Switch-2

Back board

Specifications

Network Protocol:
IEEE802.3/IEEE802.3u/IEEE802.3z
IEEE802.3x/IEEE802.3ab/IEEE802.3af/at
PoE Standard:
IEEE802.3at (30 W) and IEEE802.3af (15.4 w)
PoE Voltage:
DC 48-55 V
Power Pin:
Power over spare pairs 1/2 (+), 3/6 (-)
AC Input Voltage:
AC 100240 V
Output:
52 V2.3 A
Total Power:
120 W
Dimension (L x W x H):
320 mm x 210 mm x 46 mm
Bandwidth:
9.2 Gbps (non-blocking)
MAC Address:
2K MAC address table
Pocket Buffer Memory:
6.8 Mpps
Forwarding Mode:
Store-and-forward
Working Temperature:
-2050˚C
Storage Temperature:
-4080˚C
Working humidity:
Max relative humidity 90 %, non-condensing
Storage humidity:
Max relative humidity 95 %, non-condensing
Working height:
Max 10 000 feet (3 000 meters)
Storage height:
Max 10 000 feet (3 000 met

DIP explanation

VLAN
Port Isolation
Downlink designated ports are isolated from each other, only transmit data with the uplink port.
Default
Standard Switch
All ports communicate freely.
Extend
Link Extension
The specified port speed drops to 100 Mbps/s, max PoE transmission is 250 meters.

LED and Interface Explanation
cudy-FS1018PS1-16-Port-10-100M-PoE-Switch-04

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative: Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440

Subject of the declaration:
Title: Network Adapter
Model / Type: Cudy-PE25

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

Directive No. 2014/30/EU
Directive No. 2009/125/EC
Directive No. 2011/65/EU as amended 2015/863/EU Prague

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.