Sanico 311719 JUPITER Plafond Ceiling Lamp LED Instruction Manual
- June 4, 2024
- Sanico
Table of Contents
JUPITER
Instruction Manual
Installation – ver. 1
Installation – ver. 2
INTENDED USE / APPLICATION
Product designed for use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should
be performed by an appropriately qualified person. Any activities to be done
with disconnected power supply. Exercise particular caution. The product has a
protective contact/terminal.
Failure to connect the protective lead may lead to electric shock. Mounting
diagram: see pictures. Check for proper mechanical fastening and connection to
electrical power prior to first use. The product can be connected to a supply
network which meets energy quality standards as prescribed by law. Use
appropriate diameters of the power leads.
FUNCTIONAL CHARACTERISTICS
Use indoors.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be done when the product is disconnected from the
power supply. Do not cover the product. The product may heat up to a higher
temperature.
The light source becomes heated to a high temperature. Replacement of light
source to be performed after the product cools down: see pictures. It’s
forbidden to use the product with a damaged protective cover. The construction
of the product offers no resistance to specific conditions, e.g. due to the
presence of defrosting substances and salt atmosphere.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is
recommended.
This labelling indicates the requirement to selectively collect waste
electronic and electrical equipment.
Products labelled in this way must not be disposed of in the same way as other
waste under the threat of a fine.
These products may be harmful to the natural environment and health and
require a special form of recycling/ neutralising. Information on collection
centres is provided by local authorities or sellers of such goods. Used items
can also be returned to the seller when a new product is purchased, in
quantity no larger than the purchased item of the same type. The above rules
regard the EU area. In the case of other countries, regulations in force in a
given country must be applied.
Contacting the distributor of our products in a given area is recommended.
COMMENTS/GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns,
electrical shock, physical injury and other material and non-material damage.