MiCODUS MV33 GPS Tracker Car Tracker User Manual

MiCODUS MV33 GPS Tracker Car Tracker

Main Features

• Compact Size

• Plug & Play

• GPS+LBS Dual Positioning

• 9-90V Wide Working Voltage

• Voice Monitor

• Plug Out Alarm

• Vibration Alert

• Overspeed Alarm

• Geo-fence

• Movement Alarm

Specifications

Activate Device

Install the SIM card via the correct direction as below:

Device has not been turn on
Device ran out of battery

Please get the exact correct APN name from local SIM card provider. Take the tracker to a good signal place for operation and configure the APN for it as below:

SMS Command

Format

| Reply| Example| Note
---|---|---|---
apn123456+space+ apn name| apn ok| apn123456 cmnet| Please get the exact correct APN name from local SIM card provider.“cmnet” is just an example of APN name.
apnuser123456+ space+apnuser| apnuser ok| apnuser123456 cmnet| If the SIM card operator doesn’t have APN user name, then please ignore this configuration
apnpasswd123456+ space+apnpassword| apn password ok| apnpasswd123456 123

Note: The APN information is very important, it must 100% correct to match with the sim card of the tracker, if you configured wrong APN, the tracker also will reply “SET APN ok” but it will can’t get online!

Activate Device

GPS Main Unit x 1

Function Cable x 1

User Guide x 1

Genuine Packing Box x 1

Applications

Functions Explanation

Please follow with the quick user guide carefully!

a. Voice Monitor:

• Set admin number by this sms command:
  admin123456+space+mobile number with country code
• Switch the tracker to voice monitor mode by this sms command:monitor12345 Dial the sim number of the tracker from the admin number, then the tracker will pick up the call automatically and you will can remote monitor the voice around it.

b. Vibration Alert:
This vibration alert function just work under stationary status. How to use this function:
* Set admin number by this SMS command:
admin123456+space+mobile number with country code

• Enable the device to enter into arm mode by this SMS command:
  Configure the alarm ways by this SMS command: vibalm123456
  Keep the device under stationary status more than 5min to let it enter into sleep arm mode;
• Vibrate the device then the tracker will send the vibration alarm messages

Installation Recommendation

Area A VW、Ford、 Toyota 、Hyundai 、Citroen、BMW、 etc./Most cars.

Area B Honda,Lexus,etc.

Area C Dongfeng Citronen,etc.

Area D/E A few cars…

Troubleshooting

Check whether the data service of SIM card is enabled. Check the balance of SIM card.

Tracker shows offline| Check whether external power is still connected. Check if the vehicle entered network blind area. Check the balance of SIM card.
Unable to locate| Make sure the top side facing upward without metallic things shielded.

Make sure it’s not in area with no satellite coverage.

Location drift| In area with poor GNSS signal (tall building around or basement), drifting may happen.

Check whether vibration happens around to trigger the accelerator.

No command reply| Make sure command format is correct. Vehicle may be in network blind area.

Make sure SIM card is well inserted and has SMS service.

Full SMS Commands List

IP&Portadminip+123456+space+ip+space+port Domain SZCS,123456,DOMAIN=d.micodus.net:7700  Google Maps Link G123456# or where Data Upload Frequency upload123456+space+time Time Zone timezone+123456+space+GMT No.  Parameter Query param1 Status status Arm 111 or SF Disarm 000 or CF Movement Alarm move+ alarm distance Overspeed Alarmspeed+123456+space+080(km/h) IMEI Checking imei+123456      Sleep Mode sleep123456 time Vibrate Alarm vibx,y  Voice Monitor  monitor123456 Track Mode tracker123456

add your country code as prefix of the admin number
Back to Factory Setting| begin123456| After sent this SMS command, all your configuration will be cleared and the device will get back to factory default settings
Password Change| password+old password+space+ new password| The password just can be 6 digitals
Restart| rst| After sent this SMS command, the configurations will be saved and the device will restart
APN| apn+123456+apn content| Please get the exact correct APN name from the SIM card provider of the tracker, “cmnet” is China Mobile’s APN name
apnuser+123456+space+content| If the SIM card operator doesn’t have APN user, then please ignore this configuration
apnuser+123456+space+content| If the SIM card operator doesn’t have APN password, then please ignore this configuration
Micodus tracking platform’s IP: 47.254.77.28; Port: 7700
MiCODUS server domain: d.micodus.net, Port: 7700
V:A: Indicates the device has GPS signal;

V:V: Indicates the device doesn’t have GPS signal; 2019-11-26 10:17:01: Date and Time;

S: 000km/h: Speed of the tracker

Bat:5: Battery level of the backup battery of the tracker, it has 6 levels: “6” means 100% , “5” 80%,

“4” means 60%, “3” means 40%, “2” means 20%,

“1” means 10%;
ACC: off: The status of the car engine; 7201000006: ID number of the device; S26: GSM signal is 26 G06: GPS signal is 06 p:46000, l:13152, c:63162: p,l,c this 3 parameters means the LBS code

Time interval scope: 10-180s
If east time zone, needn’t input sign “+”, for example, if the time zone is East 8, then the SMS command should be sent like this: timezone123456 8
firmware version、ID、IP、port、domain、APN
param2| admin number, SOS number, move distance, overspeed, auto arm time, auto disarm time, alarm interval
BAT:10 GPRS: GSM: GPS:A/V ACC:on/off oil:on/off power:on/off
Movement alarm distance scope: 100-1000m
Overspeed alarm speed scope: 20-150km/h
If device keep stationary more than 5 minutes the device will enter into sleep mode automatically, SMS commands and call can wake up it
sleep123456 shock| If device keep stationary more than 5 minutes the device will enter into sleep mode automatically, vibration, SMS commands and call can wake up it
sleep123456 off| Cancel sleep mode
x=1-3( 1: SMS alarm, 2: Call alarm, 3: SMS first then Call ); y=1-9,1 is the most sensitive
vibcall+123456| Vibrate call alarm set ok (If device keep stationary more than 5 minutes the device will enter into sleep mode automatically, vibration, SMS commands and call can wake up it)
vibalm+123456| Vibrate SMS alarm set ok(If device keep stationary more than 5 minutes the device will enter into sleep mode automatically, vibration, SMS commands and call can wake up it)
Note: This command is used to switch the tracker to monitor mode, then dial the sim number of the tracker from the admin number, the device will pick up call automatically.
Note: This command is used to switch the tracker back to track mode after voice monitor

Any Questions

E-mail: support@micodus.com
Skype: MiCODUS

Download the APP

Search “MiCODUS” in iOS APP store or Google Play Store, or just scan the QR code as below to download MiCODUS APP:

|
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>