levenhuk Labzz SP10 Astroplanetarium User Manual

: June 5, 2024
: levenhuk

Table of Contents

levenhuk Labzz SP10 Astroplanetarium
Getting started
Using
Specification
Care and maintenance
Battery safety instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

levenhuk Labzz SP10 Astroplanetarium

Do not look at the light source when the device is on. This may cause PERMANENT RETINAL DAMAGE and may lead to BLINDNESS. Children should only use the device under an adult’s supervision.

Projection mode button
Nebula mode button
Power on/off button
Power input
IR Sensor

levenhuk-Labzz-SP10-Astroplanetarium-fig2

Nebula on/off
Stars on/off
LED red
LED green
LED blue
LED white
Volume up
Volume down
Previous white noise/track
Next white noise/track
White noise on/off
Nebula R-G-B-W monochromatic cycle
Nebula dual color selection
Nebula triple color combination cycle
Nebula brightness level
Sound control / rhythm mode
Nebula flow speed
Set the timer for 1 hour
Set the timer for 2 hours
Timer on/off
Power on/off

Getting started

Connect the power cable to the device and the DC adapter via a USB plug and connect to the AC power supply. Press the device power button on the remote control (Fig. 2; 21) or on the device body (Fig. 1; 3).

Using

Choose the right place to project an image: a plain white ceiling or wall will give the best effect. The optimal distance from the astroplanetarium is approx. 1.5—2m. Place the device on a flat surface. Turn the light off and close the curtains to make the room dark. Wait for 5—10 minutes to let your eyes adjust to the darkness. Turn the power on and choose the desirable projection mode.
When using the remote control, make sure that it is pointed at the infrared sensor of the astroplanetarium (Fig. 1; 5).

View changing. Press (Fig. 1; 1) to select between starry view, nebula as well as nebula and stars together. Press (Fig. 1; 2) to change the nebula mode.
Setting the timer. Use buttons (18) and (19) on the remote control (Fig. 2) to select the duration of operation. Use button (20) to turn off the timer.
Shutdown utility. If the timer is not set, the device will automatically turn off after 4 hours of operation.
Bluetooth connection. Turn on the Bluetooth mode on your smartphone. Find the “HJ-XKD08” device and connect to it.
Bluetooth music. The device can be used to play music being connected to a smartphone via Bluetooth. Use the buttons (9) and (10) on the remote control (Fig. 2) to change tracks. Use buttons (7) and (8) to adjust the volume.

Specification

Laser wavelength	523nm
Power supply	astroplanetarium: USB-C cable 5V, 1A, 1.5m included (DC 5V

2000mA adapter is not included)

remote control: 2 AAA batteries (not included)

Projection area| 20—80m² (215—860ft.²)

Care and maintenance

The device is suitable for indoor use only. The device is not waterproof. To clean the surface of the device, unplug the device. Use only a dry, soft cloth for cleaning. Strictly follow the instructions and do not disassemble or drop the device as it may result in a loss of functionality.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Make sure the batteries are installed correctly with regard to polarity (+ and –). Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.
Warranty: lifetime. For further details, please visit our web site: www.levenhuk.com/warranty
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.