Kodak STEREO CAMERA Field Case User Manual
- June 5, 2024
- Kodak
Table of Contents
Kodak STEREO CAMERA Field Case User Manual
PARTS LIST
FIG.| [ PART NO.| PART NAME
| REQD
1
---|---|---|---
29| 30| Screwdriver – Jeweler’s
29| 780| Tool – Fxpnnsinn fnr renr lens retniner| 1
29| 474| Tool – Expansion for front lens retainer| 1
29| 657| Bit – Jeweler’s screwdriver (For inner terminal, use with tool No.
30)| 1
29| 681| Blade – Phillips head screw (For use with No. 30 screwdriver)| 1
29| 751| Handle (For use with No. 474 and No. 280 tool)| 1
29| 887| Blade – Fulicross head screw (For use with No. 30 screwdriver)| 1
29| 894| Special Ground Glass For Checking Dipvergence| 1
16| 79023| Lockwasher – Tripod socket screw| 1
2| 110034| Rivet – Back hinge to back (2), Back latch to back (2)| 4
16| 110038| Rivet – Film magazine spring to case| 2
16| 110510| Rivet – Film magazine spring to case| 2
10| 116284| Screw – Film guide spring, Phillips pan head, tapping type F, No.
2-56 x 3/16 inch,|
| | steel, ni•kel| I
9| 116703| Washer – Counter post| 1
1| 120012| Buckle – Shoulder strap| 2
4| 120923| Washer – Counter dial (old style)| 1
3| 121836| Screw – Wind (1), Rewind ( 1 )| 2
4A| 121907| Washer – Counter dial, spring (new style)| 1
7| 122834| Screw – Negative lens retaining mask to front housing, Phillips pan
head,|
| | No. 2-56 x 1/4 inch, steel, rustproof| 2
10| 123056| Screw – Sprocket bearing cover to case, Phillips pan head, No.
2-.56 x 1/4 Inch,|
| | steel nickel| 2
3| 123755| Screw – Cover assembly to case, Phillips flat head, tapping type F,
No. 2-56|
| | x 1;’4 inch, steel, nickel| 2
16| 124589| Screw – Tripod socket to case, Phillips pan head, No. 2-b6 x .5/
16 inch, steel, rustproof| 2
11| 125348| Washer – Metering control cam screw| 1
4A| 125356| Washer – Counter dial (new style)|
8| 125882| Screw – Upper and lower mirror brackets to case, Phillips pan head,
No. 2-56|
| | x 1/8 inch, steel, rustproof| 4
1| 126443| Shoulder Strap Assembly| 1
7| 127392| Bezel – Finder| 1
6| 127395| Plate – Shutter gasket| 2
12| 127396| Washer – Ratchet| 1
8| 127397| Bracket – Lower mirror| 1
8| 127398| Bracket – Upper mirror| 1
12| 127399| Baffle – Light| 1
12| 127400| Plate – Ratchet separating| 1
3| 127405| Spring – Finder eye lens| 1
11| 127410| Panel – Bottom (English)| 1
1| 127412| Hinge – Case| 1
2| 127413| Hinge – Back| 1
2| 127414| Latch – Back| 1
1| 127415| Plate – Latch| 1
1| 127417| Housing – Latch plate| 1
7| 127419| Retainer – Negative lens| 1
13| 127420| Lever – Rewind| 1
12| 127422| Ratchet – Metering| 2
3| 127423| Spring – Rewind shaft retainer| 1
7| 127426| Housing – Front| 1
3| 127427| Cover – Finder lens| 1
10| 127428| Cover – Sprocket bearing| 1
7| 127429| Lens – Negative| 1
6| 127431| Gasket – Shutter| 2
14| 127432| Cam – Metering control| 1
7| 127433| Vial – Bent level| 1
16| 127435| Socket – Tripod| I
| 127436| Post – Counter pawl (old style)| 1
16| 127440| Spring – Film magazine| I
| 127446| Shaft – Rewind| I
11| 127447| Post – Bottom panel| I
12| 127448| Screw – Ratchet lock| 1
11| 127456| Screw – Metering cam control| 1
| 127458| Screw – Shutter to case| 4
| 127459| Screw – Front housing to case, bottom| 2
1| 127461
127463| Screw – Case hinge (2), Latch plate (2)
Spring – Plate latch locking| 4
I
| 127465| Spring – Counter pawl| 1
13| 127467| Spring – Double pawl|
13| 127468| Spring – Rewind lever|
13| 127469| Spring – Metering control lever|
| 127861| Hinge – Rewind crank|
| 127864| Spring – Rewind crank|
| 127865| Pin – Rewind crank hinge|
13| 128576| Spring – Pivot lever|
| 128580| Screw – Counter dial post and ratchet assembly to cover (old style)|
| 128582| Dial – Counter (old style)|
| 128584| Screw – Exposure plate and speed slide yoke assembly to case| 2
11| 128585| Screw – Bottom panel to case, Phillips flat head, No. 2-56 x 3/16
inch, steel, nickel| 2
| 128586| Screw – Diaphragm pointer assembly to shutter diaphragm slide|
| 128587| Screw – Front housing to case, top, Phillips flat head, No. 2-56 x
1/4 inch, steel, rustproof| 2
3| 128731| Washer – Winding knob|
3| 128732| Washer – Rewind knob|
13| 128736| Washer – Pivot lever stud|
4| 129335| Counter Dial Post and Ratchet Assembly (old style)| 1
13| 129336| Shutter Setting Crank and Pivot Lever Assembly| 1
3| 129339| Rewind Knob Assembly| 1
3| 129340| Winding Knob Assembly| 1
5| 129343| Diaphragm Pointer Assembly| 1
2| 129346| Film Retaining Pad Assembly (Chrome)| 2
12| 129350| Take-Up Tube Assembly| 1
,4A| 129379| Top Panel and Film Indicator Dial Assembly (English)| 1
3| 129381| Rewind Crank Assembly| 1
4,15| 129382| Case Assembly| 1
1| 129383| Back Assembly| 1
2| 129385| Covering – Back| 1
15| 129386| Covering – Case, right| 1
15| 129387| Covering – Case, left| 1
3| 129482| Flash Post Cap Assembly| 1
2| 129492| Spring – Pad booster| 1
2| 129494| Rivet – Fi Im retaining pad assembly to back| 2
12| 129515| Spring – Rewind lever| 1
9| 129541| Ring – Counter pawl retaining| 1
7| 129896| Mask – Negative finder lens| 1
11| 129929| Link – Shutter setting| 1
13| 129930| Spring – Metering lock lever| 1
1| 129951| Lens Cover Assembly| 1
11| 130008| Screw – Mechanism plate to case| 2
16| 130267| Spring – Film magazine| 1
14| 130268| Sprocket Shaft Assembly (old style)| 1
9| 130271| Pawl – Counter| 1
1| 130272| Loop – Case strap| 2
10| 130273| Spring – Film guide •| 1
3| 130275| Washer – Winding shaft, spring| 1
3| 130276| Shaft – Winding| I
1| 130317| Pin – Hinge| 1
3| 130400| Washer – Rewind knob screw| 1
14| 130410| Seal – Light.| 1
11| 130523| Pin – Roller bearing| 1
11| 130524| Roller – Film| 1
4
11| 130604| Washer – Counter dial, spring (old style)| 1
130909| Panel – Bottom (Spanish)| 1
5| 130915| Exposure Plate and Speed Slide Yoke Assembly (Spanish)| 1
14| 130920| Screw – Metering cam to sprocket shaft assembly| 1
11| 130921| Lever – Shutter setting| 1
13| 131043| Pawl – Rewind| I
13| 131044| Stud – Rewind pawl| I
13| 131046| Stud – Pivot lever assembly| I
2| 131066| Rivet – Film retaining pad assembly and booster spring| 2
5| 131845| Exposure Plate and Speed Slide Yoke Assembly (English)| I
4,4A| 132100| Screw – Counter dial post and ratchet assembly to cover (new
style)| I
9| 132102| Post – Counter pawl (new style)| 1
9| 132103| Pin – Sprocket shatt spiral| 1
4A| 132104| Dial – Counter (new style)| I
14| 132216| Sprocket Shaft Assembly (new style)| 1
4A| 132217| Counter Dial Post and Ratchet Assembly (new style)| 1
12| 133154| Mechanism Plate Assembly| I
2| 133239| Film Retaining Pad Assembly (Black)| 2
4,4A| 134131| Top Panel and Film Indicator Dial Assembly| 1
3| 801377| Lens – Eye| 1
8| 801378| Mirror – Lower| I
8| 801379| Mirror – Upper| I
27| 94312| Body – Terminal| 1
23| 94313| Sleeve – Terminal insulating| 1
23| 94317| Nut – Terminal| 1
23| 102956| Screw – Mechanism plate retaining| 2
27| 110101| Rivet – (-lick stop spring| 1
25| 116128| Washer – Blade spacer| 4
26| 117656| Wing – Diaphragm| 12
24| 117663| Stud – Retard sector (1), Escapement pinion (1)| 1
25| 117665| Blade – Shutter| 6
24| 117682| Stud – Bulb lever| 1
24| 117697| Spacer – Bulb lever| 1
23| 117925| Terminal Assembly| 1
24| 122356| Stud – Blade latch| 1
22| 122476| Screw – Drive ring retaining spring| 2
21| 122495| Spring – Main drive| 1
21| 122503| Pinion and Star Wheel Assembly|
25| 122542| Stud – Blade pivot| 4
24| • 123175| Stud – Main drive spring| 1
23| 125640| Bushing – Contact strap| 1
27| 127698| Stud – Diaphragm pointer slide| 2
2/| 12/699| Spring – Diaphragm click stop| 1
2/| 12//00| Spring – (-lick stop| 1
27| 127701| Bushing – Cable release| I
27| 127702| Bushing – Trigger button| 1
26| 12/109| Plate – Diaphragm retainer| 1
26| 127710| Slide – Diaphragm pointer| bi
19,26| 127711
| Screw – Diaphragm pointer slide (2), Speed pointer (2)
18| 127714| Mount – Front lens| 2
24| 127715| Trigger| 1
24| 127717
| Lever – Bulb| 1
22| 127718| Drive Ring Assembly| 1
19| 127721| Cover Assembly| 1
26| 127728| Diaphragm Pointer Assembly| 2
23| 127730| Strap – Flash contact| 1
19| 127731| Speed Control Lever and Link Assembly| 1
19| 127735| Stud – Bezel| 4
19| 127736| Stud – Focus mount stop| 2
19| 127737| Screw – Cover retaining| 2
17| 127738| Bezel (RH)| 1
17| 127739| Bezel (LH)| 1
17| 127740| Strap – Focusing| 1
17| 127741 <‘| Screw – Name plate to lens mount| 4
18| 127742| Ring – Rear lens clamping| 2
24| 127743| Stud – Retard pallet| 1
18| 127747| Ring – Front lens clamping.| 2
17| 127752| Plate – Name, lens| 2
17| 127909| Screw – Focusing mount (2), Bezel retaining (4)| 6
23
27| 128288
128905| Ring – Trigger button retaining
Lever – Trigger lock| 1
27| 128907| Stud – Trigger lock lever|
26
22| 128939
128945| Spring – Trigger lock lever
Spring – Bulb lever| 1
24| 129002| Blade Latch and Link Assembly|
21| 129004| Retard Sector Assembly|
19| 129005| Speed Control Ring Assembly|
21| 130018| Spring – Sector return|
24| 130019| Stud – Main drive spring|
21
22| 130021
130144| Retard Pallet Assembly
Screw – Drive ring protector| 1
27| 130188| Rivet – Diaphragm click stop retaining| 2
17| 130280| Ring – Insert| 2
23| 130402| Washer – Insulating| 1
18| 130414| Washer – Focusing mount spring| 2
22| 130708| Spring – Drive ring retaining| 2
21,22| 130709| Spring – Blade closing| 2
23| 130713| Button – Trigger| 1
23| 130768| Screw – Mechanism plate locating| 3
23
18| 130769
131074| Screw – Insulating bushing to mechanism plate
Washer – Center lens retaining| 1
2
24| 131470| Stud – Trigger lever|
22| 131471| Spring – Trigger lever|
22| 131472| Spring – Trigger|
109433| Cap| | 3
109434| Socket| | 3
109436| Stud| | 3
117843| Post| | 3
123187| Screw| | 1
129755| Cover Assembly| | 1
129756| Case Assembly| | 1
129760| Label| | 1
29| 109433| Cap| 3
29| 109434| Socket| 3
29| 109436| Stud| 3
29| 117843| Post| 3
29| 123187| Screw| 1
2| 129755| Cover Assembly| 1
29| 129756| Case Assembly| 1
29| 129760| Label| 1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>