kikka boo 3801003010426 Dolce Sonno Blue Foxy Travel Cot 2 Tier Instruction Manual
- June 5, 2024
- kikka boo
Table of Contents
kikka boo 3801003010426 Dolce Sonno Blue Foxy Travel Cot 2 Tier
IMPORTANT! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
WARNING
- Read this manual carefully and save it for future reference. Your child could be injured if you do not follow these instructions.
- Before you put your child into the cot, make sure that the four folding joints and the bottom hinge are fully engaged.
- The travel cot has rollers that allow you to easily move it. Before you do so, take the child out of it. Raise the opposite side from the wheels. The rollers can now freely move.
- Clam the plastic clips for the changing table at the two sides of the travel cot and put the changing table on the terminals. In order to fold the travel cot, the changing table must fi rst be removed.
- Do not leave your child on the changing table unattended. Do not use the changing table when your child can already sit up independantly. The changing table is only suitable for children up to the maximum weight of 9 kg.
- Make sure that the crib is not situated in the vicinity of open fl ames or sources of intense heat, such as electric heaters or gas furnaces.
- Stop using the crib if individual parts are broken, torn, damaged or missing. Use only manufacturer‘s recommended spare parts.
- Objects that could serve as foothold or that represent a risk for suffocation or strangulation, such as strings, curtain strands, etc. may not be left in the cot.
- Never use more than one mattress in the cot.
- The lowest bed position is the safest. It shall be used as soon as the child is old enough to sit up.
- Please make sure that there are no objects in bed which can be used by the child to stand up or that may cause a risk of suffocation or strangulation.
- Lose all screws, then tighten firmly!
- From time to time make sure that all bolts are tight!
- Only use warm water to clean!
- With older children, there is the danger of climbing.
- The travel crib is only ready to use when all the lock mechanisms of the foldingsystem are engaged.
- The gamesheet is only intended as a toy and must not be used as a carrying handle.
- Do not leave anything lying in bed which the child could use for climbing or whichmay represent a risk of suffocation or strangulation.
- Do not place the baby bed in the vicinity of open flames or other sources of strong heat, such as electric heaters or gas furnaces. Make certain that the cot is not placesin the immediate vicinity of edges or sharp objects.
- Never leave your child lying in bed unattended.
- To avoid danger of suffocation, keep all plastic packaging out of the reach ofchildren.
- To prevent that you child falls, do not use the travel cot when the child has already tried to sit up with the help of hands and knees or if he has reached the manufacturer‘s recommended weight or size, whichever comes first.
- The travel cot should not be used without the supplied mattress.
- If you want to use another mattress, please make sure that the height from matress surface to the top edge of the travel cot remains at least 200mm. Do not use water or air mattresses in this travel cot.
- Check the travel cot for worn parts, torn material or torn seams before use. Replace or repair parts as necessary.
- Do not use the travel cot when parts are broken or missing.
ASSEMBLY
-
Place the cot upright
-
Pull all four corners apart
-
Pull the long sides up until the the bars engage
-
Pull the short sides up until the the bars engage
-
Push down the middle
-
Attach the changing pad
-
pull the strap in the middle
-
Buckle the long sides
-
Buckle the short sides
-
Fold up
-
Place all the parts together
-
Wrap the mat around the cot
-
For the lower lying position, insert mat
-
For the second position, remove mat.
Push the rods into loops -
Connect the rods in the middle
-
Attach all plastic loops
-
Insert mat
-
Clip for changing pad
ACCESSORIES
- Carrying bag with handles
- Practical travel cot inlay with clips
- Changing mat for babies
- Play arch with colorful stars
- Fabric coated lightly padded mattress
CARE AND MAINTENANCE
To ensure safe operation, please check the function and components of the travel cot at regular intervals. Make sure that the radk is stable and the screws are tightened. Cracked and worm parts may need to be replaced immediately. Please use only original parts. lo dean the travel cot,just wipe it with a damp doth and use a mild detergent.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>