ATEN VP2020 4K Wireless Presentation Switch User Guide
- June 9, 2024
- Aten
Table of Contents
VP2020 / VP2021
4K Wireless Presentation Switch / 4K Wireless Presentation Switch
with Quad View
Quick Start Guide
VP2020 4K Wireless Presentation Switch
© Copyright 2022 ATEN® International Co. Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co.,
Ltd.
All rights reserved. All other trademarks are the property of their respective
owners.
Part No. PAPE-1223-Y10G
Released: 09/2022
Hardware Overview
| VP2020 / VP2021 Front View | VP2020 / VP2021 Rear View |
|---|
| 
- power pushbutton / LED
- USB-C port
- USB 3.0 Type-A port
- WiFi antenna ports
- audio out
- HDMI out
- USB 2.0 Type-A port
- VGA out
- Ethernet port
- power jack
Installation
-
Connect an HDMI-enabled display to the unit’s HDMI output port.
-
Connect a VGA display to the unit’s VGA output port.
-
(Optional) Connect a set of speakers to the unit’s audio output port.
Note: If the VGA output port is used, connect a set of speakers for audio output. -
(Optional)
• To operate the unit via OSD (on-screen display), connect a USB mouse to the unit’s USB 2.0 Type-A, USB 3.0 Type-A, or USB-C ports.
• To use a USB-enabled touchscreen, connect the USB-enabled touchscreen to the unit’s USB 2.0 Type-A. USB 3.0 Type-A, or USB-C and HDMI output ports. -
To allow access to the web interface and to provide WiFi coverage for the meeting members, connect an Ethernet cable to the unit’s Ethernet port.
Optionally, connect the unit to a PoE-supported network switch for web interface accessibility, WiFi coverage, and power supply. -
(Optional) Connect the power adapter to the unit’s power jack.
-
Install the WiFi antennas to the unit’s WiFi antenna ports.
-
Power on the unit by pressing the power pushbutton, and the power LED lights blue.
-
Download the ATEN Wireless Presentation App to join a meeting, share contents, switch displays, and configure system settings to the unit.
Operation
You can operate the unit using the web interface, or ATEN Wireless
Presentation App.
Web GUI
The web interface allows you to configure system settings. Upon first login,
use the default IP address 192.168.0.60 and the default
credentials (administrator/password).
Mobile App
The ATEN Wireless Presentation App is designed to help you conveniently join a
meeting, share contents, switch displays, and configure system settings to
your VP2020 / VP2021 device. To join a meeting, follow the steps below.
- Scan the QR code to install the ATEN Wireless Presentation App.
- Follow the on-screen instructions to join the meeting.
Package Contents
- 1 VP2020 4K Wireless Presentation
- Switch / VP2021 4K Wireless
- Presentation Switch with Quad View
- 1 power adapter and power cord
- 2 WiFi antennas
- 1 user instructions
Support and Documentation Notice All information, documentation, firmware,
software utilities, and specifications contained in this package are subject
to change without prior notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Support
www.aten.com/support
Scan for more information
| https://www.aten.com/global/en/products/modelno/vp2020/
---|---
| https://www.aten.com/global/en/products/modelno/vp2021/
| http://www.aten.com/ext_libraries/manuals.php?n=vp2020
|
https://play.google.com/store/apps/details?id=com.ATEN.app.WirelessPresentation
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>