Kikka boo Multifunctional Warmer Handy 4 in 1 Instructions
- June 11, 2024
- kikka boo
Table of Contents
Kikka boo Multifunctional Warmer Handy 4 in 1
IMPORTANT! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
THANK YOU FOR CHOOSING OUR PRODUCT IN ORDER TO USE THIS PRODUCT WELL, PLEASE BE SURE TO READ THE INSTRUCTION MANUAL CAREFULLY AND KEEP THE INSTRUCTION MANUAL PROPERLY.
WARNINGS
-
Please read the manual carefully before using this product.
-
In order to avoid moisture and leakage, please do not put the machine into water for dealing.
-
Do not place the product in the place accessible to infants and children; please unplug the power supply if it is not used for a long time.
-
If the power cord is damaged, in order to avoid risks, it must be replaced by the manufacturer, its maintenance department or professionals in similar departments. Do not pour milk and food
directly into the milk warmer for heating. -
Before feeding, please drop a few milk drops on your hand to check the temperature; pay attention to the food heating time should not be too long, as it could damage food nutrition.
-
When the product is used in the early stage, slight plastic smell is easy to appear after high temperature, which is a nonanal phenomenon
-
Adult use only. Keep away from children.
-
Children shall not play with the appliance.
-
Cleaning and user maintenance shall not be made by children.
TIPS: For a better user experience and later maintenance, please use a we tissue to wipe the inside and outside of the machine for the first time when starting to use the new machine. Please clean the baby bottle basket and cover with water. Pour around 150ml clean water in the bottle warmer and then choose the “Sterilize “mode. By doing so you can: check whether the machine is in good condition or not. After the operation, pour out the internal water of the bottle warmer, let it dry, next time you can use it normally.
-
PARTS
1. Transparent cover x 1 ;
2. Baby bottle basket x 1;
3. Main body x 1
-
ASSEMBLY AND USE METHOD 2.1. Fill the bottle with milk and then put it in the bottle basket (Figure 2.1).
2.2.Add proper amount of water into the milk warmer. (Figure 2.2) 2.3. Add water until reaching the height of the milk in the bottle. Pay attention, water can NOT exceed the Max level. { See Figure 2.3).
-
INTRODUCTION TO USE AND OPERATIONAL PANEL
The machine is equipped with six touch buttons { See Fig. 3.1 ): 1.Power button; 2.Mode selection; 3.lncrease temperature; 4.Reduce temperature; 5. Timer; 6.Night light LAMP Ill.
PRODUCT SPECIFICATIONS: Rated power AC 220 240V 500W; Recommended room temperature & humidity- 15-30 ° C /300/4-800/4.
USE
- Plug in the power supply and the buzzer will beep once, then the screen will display” OF”. Enter the standby state.
- Press the “POWER” button to turn on and off the machine. When the machine is turned on, the MODE button lights for Warm Milk, Thaw/Heat, Food, and Sterilize are all on and the screen display 00 {See Fig. A)
- Press the “MODE button” (Fig. 2) to select four functions: MILK -milk warming, THAW/HEAT -defrosting/fast heating, FOOD -food warming, STERILIZE -sterilization. ( See Fig. A) Each press will display only one function. Other function lights will be off.
MILK warming mode (See Fig. A): Select the warm milk mode, the MILK icon is lit on, and the screen displays4QOC by default. At this time, you can use”+” and”-” ( See 3,4) to adjust and set the temperature from 35°( to 500 C. The corresponding indicator flashes 5 times quickly and the buzzer beeps once to enter the heating state, during the heating process, the screen displays the current milk temperature value and the selected temperature alternately, after reaching the selected temperature it will no longer display alternatively the temperatures. Fast heating function takes around 5-8 minutes.
THAW/HEAT defrosting/fast heating mode: Select the thaw mode, THAW/HEATicon is
lit on., then the display shows 37 °C by default. (the display is shown in
Fig. B) At this time, you can use “+” and “-” to adjust the setting
temperature from 32 to 42 °C. The corresponding indicator flashes 5 tinnes
quickly and the buzzer beeps once to enter the heating state. During the
heating process, the screen displays the current milk temperature value and
the selected temperature alternately, after reaching the selected temperature
it will no longer display alternatively the temperatures.
FOOD warming mode: Select the food warming mode and the the FOOD icon is lit
on and the screen will display 75°( by default. At this time, you can use”+”
and”-” ( See 3 and 4) to adjust and set the temperature value from 60 to 80
°C. The corresponding indicator flashes 5 times quickly and the buzzer beeps
once to enter the heating state. During the heating process, the screen
displays the current milk temperature value and the set temperature
alternately, after reaching the set temperature it will no longer display
alternatively the temperatures.
STERILIZE sterilizing mode: Add about 150ml of water to the milk warmer and
select the sterilize mode. The STERILIZE icon is lit on and the screen
switches to display 100°( and alternately shows the water temperature rise.
After reaching 100 degrees of water, it will continue to heat for 10 minutes
in order to sterilize. It will return to standby after sterilization.
TIMER- selecting desired time when to start to work: Press the TIMER button (
See Fig. 5, section Ill.), the TIMER icon is light on. Then the screen will
display one hour by default. The time can be adjusted by”+,-”. When the
booking countdown is completed, the machine starts to heat up. Note: Please
select the function before making an appointment. LAMP night light: Press the
“LAMP” button and the night light indicator is on.
CLEANING AND MAINTENANCE
- When cleaning, please unplug the power plug and wait for the heating plate to cool to room temperature before cleaning.
- Do not scratch the heating plate with metal sharp objects.
- Due to the different water quality in different areas, any scale found in the device must be removed on a regular basis to protect the health of your family and children. It is recommended to use pure water.
- Use citric acid: add an appropriate amount of water and then 10g citric acid, in which the transparent top cover needn’t be added, switch on sterilization mode, after finishing wash with water from 5 to 6 times. Repeat the above steps when necessary. Use white vinegar. pour an appropriate amount of white vinegar into the bottom sterilization plate of the main unit and let it stand for 1 hour without being heated. After discarding white vinegar, wash with water from 5 to 6 times. Repeat the above steps when necessary.
