kikka boo Ciela Autofolding Pushchair Instruction Manual
- June 1, 2024
- kikka boo
Table of Contents
kikka boo Ciela Autofolding Pushchair
IMPORTANT- READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
WARNING
- Never leave the child unattended.
- This product is suitable from birth to weight of the child up to 22 kg or 4 years, whichever comes first.
- Ensure that all the locking devices are engaged before use.
- To avoid injury ensure that the child is kept away when unfolding and folding this product.
- Do not let the child play with this product.
- Use a harness as soon as the child can sit unaided.
- Always use the restraint system.
- This product is not suitable for running or skating.
- This product is designed to be used from baby’s birth. You shall use the most recined position for newborn babies. The newborn child is not able to sit and hold his /her head up unassisted. Therefore, do not fix the backrest in sitting position for children under 6 months.
- No additional mattress/cushion shall be added.
- This pushchair is intended for a child who cannot sit up unassisted, turn over or get up on their hand and knees. Maximum weight of the child: 22 kg.
- Only spare parts delivered or recommended by the manufacturer/ distributor can be used.
Brakes shall be engaged when placing and removing the children.
The shopping basket can take a maximum load of 2 kg.
Any load attached to the handle and/or on the back of the backrest and/or the
sides of the vehicle will affect the stability of the vehicle. Maximum load of
the accessory bag 1 kg.
Do not hang any additional bags.
Regularly check for loose parts. Make routine inspection, regularly maintain,
dean and/ or wash the vehicle.
The vehicle shall be used only for one child.
Accessories which are not approved by the manufacturer shall not be used.
Make sure that the safety belts are placed properly.
Only spare parts delivered or recommended by the manufacturer/ distributor
shall be used.
Produced for Kika Group Ltd., Vasil Levski 121, Plovdiv, Bulgaria. Made in
China.
Complies with EN 1888-1:2018+ A1:2022; EN 1888-2:2018+A1:2022.
PARTS
- Canopy;
- Front armrest
- Front and rest quick release button;
- 5eat belts;
- footrest;
- footrest;
- Front-wheel alignment
- Front-wheel quick-release paddle;
- front wheel;
- rear wheel;
- Rear brake pedal;
- Cart;
- Flip button
COMPONENTS
- Front wheels;
- rear wheels;
- main module;
- Security panel
ASSEMBLY
Please check that all parts are included in the package. If any parts are missing or defective, please contact customer service immediately. In order to ensure the life of the stroller, please use it correctly according to the instructions and carry out a thorough inspection regularly.
UNFOLDING (See Fiaures 1-2)
Place the frame on the floor as shown in the picture. Grab the handle and pull
outward and up. The stroller is fully deployed when you hear the “click”
sound.
FRONT WHEELS INSTALLATION
(See Figure 3)
- Lift the front frame and fully insert the front wheel into the mounting hole under the frame. Repeat the step for the other front wheel.
- Before use, pull down the front wheels to check whether they are installed correctly.
REAR WHEELS INSTALLATION
(See Fiqure 4)
- Insert the rear wheel into the mounting hole on the side of the frame as shown.
- Before use, pull down the front wheels to check whether they are installed correctly.
ADJUSTING THE BACKREST (See Figures 5-6)
- Use the backrest adjustment button to adjust the seat position as shown. Grasp the adjustment knob and pull outward.
- Grasp the backrest adjustment knob and pull down to lower the backrest position.
ARMREST INSTALLATION (See Figures 7-8)
- Insert both ends of the armrest into the holes on the seat until you hear a “click” sound. Pull the two ends of the armrest to check if they are installed correctly.
REAR BRAKE (See Figures 9-10)
- Step down the brake rod and the wheels will be braked. Lift the brake rod up to release the brake.
FRONT WHEELS INSTALLATION (See Figure 11)
Press the quick release paddle and pull the front wheel down as shown in the
picture.
REAR WHEEL INSTALLATION (See Figure 12)
Press the quick-release paddle and pull the rear wheel outward as shown in the
picture.
ADJUSTING THE TOP (Refer to Figure 13)
To unfold and fold the canopy, pull and slide the canopy as shown in the illustration.
ADJUSTING THE FOOTREST (See Figures 14-15)
Press the buttons on the back of the footrest up or down to adjust the
position of the footrest as shown in the picture.
USE OF SEAT BELTS (See Figure 16)
We put on the five-point safety belt to ensure the baby’s safety. The straps
can be adjusted according to the baby’s needs.
Press the button to unfasten the seat belt as shown in the figure.
FOLDING (See Figures 17-18)
- Press button 1 on the handle as the picture shows, press button 2 as the picture shows, then the stroller will be folded automatically.
- Stroller folding is complete as shown in the figure.
CARE AND MAINTENANCE
The stroller requires regular maintenance. Due to the intended use (outdoor use on surfaces), the following care instructions must be observed to ensure proper functioning.
-
Metal elements can be cleaned with a damp cloth and mild detergent. Wipe dry after cleaning to avoid corrosion.
-
The upholstery can be cleaned with a damp cloth and mild detergent. After deaning, the upholstery should be dried by hanging in one place away from prolonged exposure to sunlight
spread out in a well-ventilated place. -
Do not machine wash upholstery, tumble dry, or soak for a long time.
-
Do not use bleach. Only use mild detergents.
-
If the product gets wet, wipe the metal elements dry and leave unfolded in a well-ventilated place until completely dry.
-
Do not expose the product to sunlight for a long time, as the upholstery and plastic parts may become discolored or damaged.
-
Moving parts should be treated regularly with a fast evaporating cleaner and lubricant such as WD-40.
-
Seat belts and other adjustable items should be checked regularly.
-
Sand, salt and other contaminants should be cleaned regularly from wheels, brakes and suspension. Don’t use any lubricant in place
-
Avoid contact with salt water (sea water, sea breeze, road salt) to avoid corrosion.
Kika Group Ltd.
Vasil Levski 121
4000 Plovdiv, Bulgaria
[email protected]
+359 32 51 51 51
/KikkabooBaby @kikkabooworld/@KikkaBooOfficial