kikka boo Aneres Video Baby Monitor Instruction Manual

kikka boo Aneres Video Baby Monitor

INTRODUCTION Thank you for purchasing our product. Before using this device, read the instructions carefully and keep this manual for future reference.

PRODUCT FEATURES

• 2.4GHz frequency
• FHSS technology
• Range outdoors 270-300m
• Range indoors 30-50m
• Automatic channel selection – 20 channels
• Display 4.3 inch
• Brightness levels – 5
• Flexible stand for Baby unit
• VOX activation
• Two-way talk
• Power saving mode
• Rechargeable battery – Parent Unit 2000 mAh
• Baby room temperature detection
• Temperature, feeding, low battery and out of range alarm
• Lullabies – 4
• Night vision
• Volume control
• Icon interface and menu with 4 languages – English, Spanish, Greek and Bulgarian; One parent can connect with 4 baby units
• Set includes: Parent unit, Baby unit, Flexible stand, Manual, 2 USB cables, 1 USB adapter, Built-in Lion battery in Parent unit.

WARNINGS

• The Baby monitor has been designed to help you look after your baby and is not intended as a tool for substituting the adults’ supervision & care in any circumstances.
• For your safety, please use the provided power adaptors. (The manufacturer will not be responsible to any loss incurred by not using the manufacturer’s provided power adaptors).
• To reduce the risk of fire or electric shock, do not expose this baby monitor to rain or moisture.
• Connect the baby monitor to an easily accessible AC outlet. Should you notice an abnormality in the device, disconnect the main plug from the AC outlet immediately.
• DON’T disassemble the casing to avoid the risk of the electric shock.
• DON’T use the damaged power adaptors.
• DON’T interfere the plug of power adaptors with conductors, e.g. with rings.
• Battery may explode if mistreated.
• NEVER use extension cords with AC adapters. Only use the AC adapters provided.

ELECTRIC SHOCK WARNING

• Never use this device near water, including near a bathtub, sink, laundry tube, wet basement, etc.
• This product and accompanying accessories are NOT toys. Do not allow children to play with them.
• This product is NOT intended to replace proper supervision of children. You MUST check your child’s activity regularly.
• This product is not intended for use as a medical camera and its use should not replace adult supervision. Unplug product during lightning storms. This product is intended for indoor use only.
• Clean each unit with dry cloth only.
• Do not block any ventilation openings.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat.
• Only use attachments and accessories specified by the manufacturer.
• Unplug this device when unused for long periods of time.
• Do not touch the plug contacts with sharp or metal objects.

PARTS

Set includes:

• 1 × Baby unit (camera);
• 1 × Parent unit (4.3 inch display, rechargeable Li-battery 2000mAh);
• 1 × Flexible stand for Baby unit;
• 1 × USB adapter;
• 2 x USB cables;
• 1 x Manual.

BABY UNIT (CAMERA)

1. Infrared LED lights
2. Camera lens
3. Temperature sensor
4. Light sensor
5. Microphone
6. Pair key
7. Speaker
8. AC Adapter jack
9. Power indicator
10. Antenna
11. Site for installing the flexible stand
12. Flexible stand

PARENT UNIT (MONITOR)

1. Power/Sleep Key: long press – Power off; short press – Sleep mode (LCD off). You can trigger the monitor working again by pressing any button on the monitor;
2. Menu / Backkey
3. Vol + / UP key
4. Vol -/ Down Key
5. Light + / Right key
6. Light – / Left key
7. Confirm key
8. Zoom
9. View shortcut key
10. Talk key
11. Microphone
12. Power indicator
13. Volume indicator
14. 4.3 inch LCD
15. Antenna
16. Speaker
17. Monitor holder
18. Reset key
19. AC Adapter jack

Please turn ON both units (Baby unit – using the USB adapter and cable; Parent unit – press the Power button. Both units are paired by default. You do not have to pair them unless you reset your camera.

PAIRING AND CONNECTING

(For reference please see pages from IV and V)
Pairing and connecting (Figures 4.1, 4.2 )
If you need to connect to another camera or re-pairing the camera, please follow below steps:

1. Enter the MENU and select the CAMERA icon;
2. Press the green “+” icon to add or re-pair a camera;
3. The camera indicator light starts flashing;
4. Select an available channel from the menu (1, 2, 3, or 4)
5. Press OK and the camera pairing indicator light will stop flashing after pairing procedure is successfully done.

MENU

There are 6 icons and you can perform different functions.( Figure 5.1 )

1. Camera – You can do repairing, add and delete the camera. (Figure 5.2 )
2. View – You can select which camera image you want to show on the monitor. The icon (Fig. 5.4 ) means auto scanning ( Figure 5.3 )
3. Lullabies – There are 4 lullabies for your choice. You can play any one or play all. ( Figure 5.5 )
4. Feeding Timer – Default is 2 / 3 / 4 / 5 hours. You can also set your feeding time in “Setting” (Figure 5.6 )
5. VOX – It is a voice activation function. You can select it or remove it. You can also choose the microphone sensitivity (High / Medial / Low)( Figure 5.7, 5.8 )
6. Setting – Some other function settings can be found in the Setting option ( Figure 5.9)
   • Language – There are 4 languages for your choice. (Figure 5.10 )
   • Date – You can adiust the “Date” and “Time” ( Figure 5.11, 5.12) perature alarm
   • Temperature – You can select the Temperature scale (C / F) and adjust the temperature alarm range ( Figure 5.13, 5.14, 5.15 )
   • Power Saving – when the Power Saving Mode is ON the brightness level will be changed to the lowest level and battery icon on the top right corner will be changed to orange colour. When the Power Saving Mode is OFF brightness level will get back to normal and battery icon will turn back to white colour. (Figure 5.16)
   • FPS – You can set the frequency to 50HZ or 60HZ ( Figure 5.17 )
   • Reset – You can reset the device and restore to the default setting (Figure 5.18)

Sleeping mode – to turn ON the sleeping mode press shortly the POWER button (LCD display will turn off). You can trigger the monitor working again by pressing any button on the monitor.

KIKKA BOO Bulgaria
Vasil Levski 121
Plovdiv, Bulgaria
office@kikkaboo.com
Kikkaboo (Bulgaria)
kikkabooworld

KIKKA BOO Spain
Calle Sos Del Rey Catolico, 16, 7C
Granada, Spain
office@kikkaboo.com
Kikkaboo Spain
kikkaboospain

www.kikkaboo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>