kikka boo Ayla Chipboard Baby Cot Instruction Manual
- June 12, 2024
- kikka boo
Table of Contents
0m+
op to 50 kg
Ayla Chipboard Baby Cot
Instruction Manual
INSTRUCTIONS FOR USE
IMPORTANT! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE. THE SAFETY OF YOUR CHILD
COULD BE PUT AT RISK IF YOU DO NOT FOLLOW THESE INSTRUCTIONS.
- If you leave your child unattended in the cot, always make sure that the movable side is closed.
- DO NOT ADD A SECOND MATTRESS ON THIS ONE, SUFFOCATION HAZARDS.
- The mattress base complies with: EN 716-1.
- Make sure all safety latches are properly locked.
- The assembly parts should always be properly adjusted and should be checked periodically; and if necessary, readjusted.
- Be aware of the risk of open re and other sources of strong heat, such as electric bar res, gas res, etc in the near vicinity of the cot
- Do not use the cot if any part is broken, torn or missing and use only spare parts approved by the manufacturer.
- Do not leave anything in the cot or place the cot close to another product, which could provide a foothold or present a danger of suocation or strangulation, e.g. strings, blinds/curtain cords, etc.
- Do not use the cot when the child is able to get out of it in order to prevent the risk of falls.
- All parts of the cot must be properly positioned so that the baby can never be punctured or snagging your clothing or accessories (pacers chains, shoelaces, …)
- The cot is ready for use only when the locking mechanisms are in place: this operation must be checked before using the cot.
- The lowest position is the safest and that the base should always be used in that positions as soon as the baby is old enough to sit up.
- Thickness of the mattress shall be such that the inner height ( surface of the mattress to the upper edge of the cot frame) is at least 500 mm. in the lowest position of the cot base and at least 200 mm. in the highest position of the cot base. Maximum thickness of the mattresses is 100 mm.
- The minimum size of the mattress to be used with the cot shall be such that there shall be no gap more than 30 mm. between the mattress and the sides’ ends in any position of the mattress. Minimum mattresses size L x W / 1200 x 600 mm.
- The baby cot must be placed on a levelfloor.
- Young children should not be left unattended when close to the cot
I. FUNCTIONS OF THE PRODUCT 1. Three levels of the mattress in height 2.
Movable side rail. 3. Removable profiles from the rail.
II. PART LIST (Check the pictures.)
III. FITTINGS AND ACCESSORIES (Check the pictures. )
IV-V111. ASSEMBLY (Please follow the schemes in the pictures.)
CLEANING AND MAINTENANCE
- Use antistatic detergents.
- Do not use abrasive cleaners.
- Keep the surface clean.
- When moved, lift the device in order to avoid damages.
Clipboard and MDF profile.
THIS PRODUCT APPLIES TO EN 716 AND EN 71.
KIKKA BOO Bulgaria
Vasil Levski 121
Plovdiv, Bulgaria
[email protected]
Kikkaboo (Bulgaria)
kikkabooworld| KIKKA BOO Spain
Calle Sos Del Rey Catolico, 16, 7C
Granada, Spain
[email protected]
Kikkaboo Spain
kikkaboospain
---|---