CAL-ROYAL CR2704 Commercial Saddle Threshold Instruction Manual
- June 5, 2024
- CAL-ROYAL
Table of Contents
ITEM CR2704
FINISH: MILL ALUMINUM AND DURO
1/4” (6.4 mm) COMMERCIAL SADDLE THRESHOLD
1/4” H x 7” W
6.4 mm x 177.8 mm
FASTENERS : #10 x 1-1/2″ WS
INSTALLATION INSTRUCTIONS
- Measure the width at the bottom of the frame and cut the threshold to the exact full width of the opening.
- If necessary trim and notch the threshold ends to accommodate the side jamb stops.
- Mark and drill pilot holes through the pre-drilled holes in the threshold and fasten with the screws provided.
- Seal both ends and along the sides of the threshold.
- Operate the door multiple times to ensure proper adjustment so as not to prevent the door from self-closing and latching.
| |
---|---|---
Meets UL10B, UL10C and
UBC 7-2 (1997) Category J| 3 HR-POSITIVE PRESSURE
MATERIAL FOR USE IN LISTED STEEL FRAMES AND CLASSIFIED HOLLOW METAL STEEL
COMPOSITE TYPE FIRE DOORS ARE RATED UP TO AND INCLUDING 3 HOURS, WOOD
COMPOSITE TYPE FIRE DOORS ARE RATED UP TO AND INCLUDING 1-1/2 HOURS, AND WOOD
CORE FIRE DOORS ARE RATED 20 MINUTES WITHOUT HOSE STREAM.
DWG # TWG5045 – 1/1 – MAR2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>