CAL-ROYAL DS-414 Aluminum Door Shoe Instruction Manual
- October 27, 2023
- CAL-ROYAL
Table of Contents
Weather Seal Door Accessories
DS-414/DS-414
Door Shoes
Instruction Manual
DS-414 Aluminum Door Shoe
DS-414 Door Shoes
ITEM
DS-414
LENGTH: 36″ & 48″ VINYL SEAL INSERT MILL FINISH ALUMINUM & DURO FINISH
Packaging
includes:
- Screws for
Wood doors – # 6 x 5/8″
Metal doors – # 6 x 5/8″
Installation Guidelines
- Remove the door if necessary to prepare the bottom of the door prior to installation of door shoe.
- Measure, mark, and trim door shoe exact to the full width of the door. Trim seal 1/16” longer than trimmed door shoe on each end. Crimp ends to secure insert.
- Drill pilot holes in header stop for the screw at marks.
- Slide door shoe in place and insert screws.
Adjust to ensure light even contact with threshold. Fasten the screws.
Tools Required
- Power tool drill
- Marker
- Measuring tape
- Screw driver
- Cutting tools (Miter saw, circular saw, hacksaw, and plier)
Important Reminder: Always use appropriate Personal Protective Equipment (PPE) during installation.
6605 Flotilla Street, City of Commerce, CA 90040 U.S.A.
Website:www.cal-royal.com
Email:sales@cal-royal.com
Phone: (323) 888-6601 ; (800) 876-9258
Fax: (323) 888-6699 ; (800) 222-3316
Documents / Resources
| CAL-
ROYAL DS-414 Aluminum Door
Shoe
[pdf] Instruction Manual
DS-414, Aluminum Door Shoe, Door Shoe, Aluminum Shoe, Shoe
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>