CAL-ROYAL DS-413 Door Shoes Installation Guide
- June 4, 2024
- CAL-ROYAL
Table of Contents
CAL-ROYAL DS-413 Door Shoes
Installation Guidelines:
- Remove the door if necessary to prepare the bottom of the door prior to installation of door shoe.
- Measure, mark, and trim door shoe exact to the full width of the door. Trim seal 1/16” longer than trimmed door shoe on each end. Crimp ends to secure insert.
- Drill pilot holes in header stop for the screw at marks. Slide door shoe in place and insert screws.
- Adjust to ensure light even contact with threshold. Fasten the screws.
Packaging includes:
- Screws for
- Wood doors – # 6 x 5/8″
- Metal doors – # 6 x 5/8″
Tools Required:
-
Power tool drill
-
Marker
-
Measuring tape
-
Screw driver
-
Cutting tools
(Miter saw, circular saw, hacksaw, and plier) -
Important Reminder: Always use appropriate
-
Personal Protective Equipment (PPE) during installation.
ABOUT COMPANY
- 6605 Flotilla Street, City of Commerce, CA 90040 U.S.A.
- Website: www.cal-royal.com
- Email: sales@cal-royal.com
- Phone: 323-888-6601 ; 800-876-9258
- Fax: 323-888-6699 ; 800-222-3316
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>