CAL-ROYAL VT49 Vinyl Thresholds Installation Guide
- June 5, 2024
- CAL-ROYAL
Table of Contents
VT49
Vinyl Threshold
VT49 Vinyl Thresholds
Installation Guidelines:
-
Measure the door opening at the sill by measuring the width of both rabbets.
-
Transfer measurement to the threshold.
-
Cut the threshold to length. Notch ends of the threshold to fit around the stop on the door frame as necessary.
-
Trail fit the threshold to verify proper fit. Cut down if necessary.
Note: If using the threshold with carpet, insert carpet first into the threshold opening before fitting it into place at the sill. -
Apply glue to concrete or plywood subfloors before setting the vinyl threshold in place.
Applications:
– transition where 3/8” carpet meets 3/8” til
Tools Required:
– Marker
– Measuring tape
– Caulking gun
– Cutting tools ( Miter saw, circular saw, hacksaw
TESTING/RATINGS:
6605 Flotilla Street, City of Commerce, CA 90040 U.S.A.
Website: www.cal-royal.com
Email: sales@cal-royal.com
Phone: 323-888-6601 ;
800-876-9258
Fax: 323-888-6699 ;
800-222-3316
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>