CAL-ROYAL PG-602 Weather Seal Door Accessories Installation Guide
- June 5, 2024
- CAL-ROYAL
Table of Contents
PG-602
Perimeter Gasketing
ITEM/FINISH: PG-602
SIZE: 3684, 4884, 4896 & 7296
VINYL INSERT
MILL FINISH ALUMINUM & DURO FINISH
Seal gap between door and door jamb. Apply to the Top part and both sides of the door jamb.
Weather Seal Door Accessories PG-602 Perimeter Gasketing
Installation Guidelines:
- It can be used on either wood or metal door jamb frames.
- Install first the header piece of the weatherstrip that will be used as a guide for the hinge jamb and strike jamb pieces.
- Determine the required length, mark, and cut the header piece to length. Close the door and position the header piece on the header stop so that seal makes the light even contact with the door. Mark the header stop in the center of slotted holes.
- Use a power tool (portable drilling machine to drill pilot holes in header stop at marks.
- Fasten header piece to header jamb stop with provided screws.
- Repeat steps #2, #3, #4, and #5, to install the hinge and strike jamb pieces. The hinge and strike jamb pieces should be in contact with the header piece (top) and on the threshold (floor).
- Do several tests by opening and closing the door a few times to make sure that the weatherstrip is properly sealed on the door. Also, check the latch bolt is connecting to the strike plates.
- Adjust the seal according to desired specifications by unfastening the screws, rearranging the weatherstrip, and fastening the screws.
ASTRAGALS/MEETING STILES:
- Cut into lengths equal to the height of the door.
- Arrange at meeting stile door edges. Fasten screws in the center of slots.
- Adjust seal as desired, making sure that the doors can be opened and closed properly, then fasten screws.
|
---|---
Tools Required:
– Power tool drill
– Marker
– Measuring tools
– Screwdriver
– Cutting tools (Hacksaw & plier)
Packaging includes:
– Jamb header (1 pc)
– Strike Jamb (1 pc)
– Hinge Jamb (1 pc)
– Screws for :
wood door – #6 x 5/8″ metal doors – #6 x 5/8″
TESTING / RATINGS:
GASKETING MATERIAL FOR FIRE DOORS INTENDED FOR APPLICATION TO UL LISTED STEEL FRAMES AND/OR CLASSIFIED STEEL COVERED COMPOSITE TYPE. AND HOLLOW METAL TYPE FIRE DOORS RATED UP TO 3HRS; WOOD AND PLASTIC COVERED COMPOSITE TYPE FIRE DOORS RATED UP TO 1-1/2 HRS: AND WOOD CORE TYPE FIRE DOORS RATED UP TO 20 MINUTES. 43ZY
6605 Flotilla Street, City of Commerce, CA 90040 U.S.A.
Website: www.cal-royal.com
Email: sales@cal-royal.com
Phone: 323-888-6601 ;
800-876-9258
Fax: 323-888-6699 ;
800-222-3316
DWG # TWG5015 – 1/1 – MAR2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>