CAL-ROYAL DSR-407 Door Shoes with Rain Drip Installation Guide
- June 5, 2024
- CAL-ROYAL
Table of Contents
Weather Seal Door Accessories
DSR-407 Door Shoes w/ Rain Drip
DSR-407
Door Shoes
w/ Rain Drip
ITEM/FINISH:
DSR-407
LENGTH: 36” & 48”
VINYL SEAL INSERT
MILL ALUMINUM &
DURO FINISH
Packaging includes:
– Screws for
wood doors – # 6 x 5/8″
metal doors – # 6 x 5/8″
Installation Guidelines:
-
Remove the door if necessary to prepare the bottom of the door prior to installation of door shoe.
-
Measure, mark, and trim door shoe exact to the full width of the door.
Trim seal 1/16” longer than trimmed door shoe on each end. Crimp ends to secure insert. -
Drill pilot holes in header stop for the screw at marks.
-
Slide door shoe in place and insert screws.
Adjust to ensure light even contact with threshold.
Fasten the screws.
Tools Required:
– Power tool drill
– Marker
– Measuring tape
– Screw driver
– Cutting tools (Miter saw, circular saw, hacksaw, & plier)
- Screw
- Retainer (Casing)
- Rubber Seal (VINYL)
Important Reminder: Always use appropriate
Personal Protective Equipment (PPE) during installation.
TESTING / RATINGS:
GASKETING MATERIAL FOR FIRE DOORS INTENDED FOR APPLICATION TO UL LISTED STEEL FRAMES AND/OR CLASSIFIED STEEL COVERED COMPOSITE TYPE, AND HOLLOW METAL TYPE FIRE DOORS RATED UP TO 3HRS; WOOD AND PLASTIC COVERED COMPOSITE TYPE FIRE DOORS RATED UP TO 1 -1 /2 HRS; AND WOOD CORE TYPE FIRE DOORS RATED UP TO 20 MINUTES. 43ZY
6605 Flotilla Street, City of Commerce, CA 90040 U.S.A. | Website: www.cal-
royal.com | Email: sales@cal-royal.com
Phone: 323-888-6601 ;
800-876-9258 | Fax:
323-888-6699 ;
800-222-3316
DWG # TWG5023 – 1/1 – MAR2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>