MEAN WELL RSP-1500 1500W Single Output Power Supply Instruction Manual

: June 5, 2024
: MEAN WELL

Table of Contents

MEAN WELL RSP-1500 1500W Single Output Power Supply
Features
Applications
SPECIFICATION
Static Characteristics
Function Manual
1500W Single Output Power Supply
Mechanical Specification
Installation Manual
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MEAN WELL RSP-1500 1500W Single Output Power Supply

Features

Universal AC input/ Full range
Built-in active PFC function
High efficiency up to 91%
Forced air cooling by built-in DC fan
Output voltage programmable
Active current sharing up to 6000W (3+1)
Built-in remote ON-OFF control/ remote sense/
auxiliary power/ power OK signal
Protections: Short circuit/ Overload/Over voltage /Over temperature
Optional conformal coating
5 years warranty

Applications

Factory control or automation apparatus
Test and measurement instrument
Laser related machine
Burn-in facility
Digital broadcasting
RF application

SPECIFICATION

MODEL| RSP-1500-5| RSP-1500-12| RSP-1500-15| RSP-1500-24| RSP-1500-27| RSP-1500-48
---|---|---|---|---|---|---

OUTPUT

| DC VOLTAGE| 5V| 12V| 15V| 24V| 27V| 48V
RATED CURRENT| 240A| 125A| 100A| 63A| 56A| 32A
CURRENT RANGE| 0 ~ 240A| 0 ~ 125A| 0 ~ 100A| 0 ~ 63A| 0 ~ 56A| 0 ~ 32A
RATED POWER| 1200W| 1500W| 1500W| 1512W| 1512W| 1536W
RIPPLE & NOISE (max.) **Note.2| 150mVp-p| 150mVp-p| 150mVp-p| 150mVp-p| 150mVp-p| 200mVp-p
VOLTAGE ADJ. RANGE| 4.5 ~ 5.5V| 10 ~ 13.5V| 13.5 ~ 16.5V| 20 ~ 26.4V| 24 ~ 30V| 43 ~ 56V
VOLTAGE TOLERANCE Note.3| ±2.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%
LINE REGULATION| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
LOAD REGULATION| ±2.0%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
SETUP, RISE TIME| 1500ms, 100ms at full load
HOLD UP TIME (Typ.)**| 10ms at full load| 14ms at full load| 16ms at full load

INPUT

PROTECTION

| ****

OVERLOAD **Note.4**

| 105 ~135% rated output power
Protection type : Constant current limiting unit will shut down o/p voltage after 5sec. Re-power on to recover

OVER VOLTAGE

| 5.75 ~ 6.75V| 13.8 ~ 16.8V| 17 ~ 20.5V| 27.6 ~ 32.4V| 31 ~ 36.5V| 57.6 ~ 67.2V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE| Shut down o/p voltage, recovers automatically after temperature goes down

FUNCTION

| OUTPUT VOLTAGE PROGRAMMABLE(PV)| Adjustment of output voltage is allowable to 70 ~ 100% of nominal output voltage. Please refer to the Function Manual.
CURRENT SHARING| Up to 6000W or (3+1) units. Please refer to the Function Manual.
AUXILIARY POWER| 12V@0.1A(Only for Remote ON-OFF control)
REMOTE ON-OFF CONTROL| Please see the Function Manual.
REMOTE SENSE| Compensate voltage drop on the load wiring up to 0.3V. Please refer to the Function Manual.
ALARM SIGNAL OUTPUT| Power OK signal. Please see the Function Manual.

ENVIRONMENT

| WORKING TEMP.| -20 ~ +70℃ (Refer to “Derating Curve”)
WORKING HUMIDITY| 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT| ±0.05%/℃ (0 ~ 50℃)
VIBRATION| 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC

(Note 5)

| SAFETY STANDARDS| UL62368-1, CAN/CSA C22.2 No. 62368-1, TUV BS EN/EN62368-1, BSMI CNS14336-1, AS/NZS62368.1, EAC TP TC 004 approved
WITHSTAND VOLTAGE| I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION

EMC IMMUNITY

95% interruptions 250 periods

OTHERS

| MTBF| 265.3K hrs min. Telcordia SR-332 (Bellcore) ; 90.3K hrs min. MIL-HDBK-217F (25℃)
DIMENSION| 27812783.5mm (LWH)
PACKING| 3.0Kg; 4pcs/13Kg/1.19CUFT
NOTE| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Derating may be needed under low input voltages. Please check the derating curve for more details.

5. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 720mm*360mm metal plate with 1mm of thickness. The final equipment must be re- confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)

6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

Static Characteristics

MODEL

INPUT

| 5V| 12V| 15V
---|---|---|---

100~264VAC

| 1200W

240A

| 1500W

125A

| 1500W

100A

90VAC

| 960W

192A

| 1200W

100A

| 1200W

80A

MODEL

INPUT

| 24V| 27V| 48V

100~264VAC

| 1512W

63A

| 1512W

56A

| 1536W

32A

90VAC

| 1209.6W

50.4A

| 1209.6W

44.8A

| 1228.8W

25.6A

Derating Curve

Efficiency vs Load (48V Model)

Function Manual

Remote Sense
The Remote Sense compensates voltage drop on the load wiring up to 0.3V

MEAN-WELL-RSP-1500-1500W-Single-Output-Power-Supply-
FIG-5

Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim)
In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed to 70~100%(Typ.) of the nominal voltage by applying EXTERNAL RESISTANCE

MEAN-WELL-RSP-1500-1500W-Single-Output-Power-Supply-
FIG-6

Connect an external resistor between TRIM(pin4) & -S(pin3 or pin4 or pin5) on CN1 or CN2, and +S & +V, -S & -V also need to be connected.

Remote ON-OFF
Remote ON-OFF is activated by the configuration with respect to CN1,CN2 and CN3 as shown in the following diagram.

MEAN-WELL-RSP-1500-1500W-Single-Output-Power-Supply-
FIG-8

Connection Method

| Fig. 3.2(A)| Fig. 3.2(B)| Fig. 3.2(C)
---|---|---|---
SW Logic| Output on| SW Open| SW Open| SW Close
Output off| SW Close| SW Close| SW Open

Alarm Signal Output
Alarm signal is sent out through “POK” & “P OK GND” and pins on CN3. Please acknowledge an external voltage source is required for this function

Function	Description	Output of alarm(P OK)

__

P OK

| The signal is “Low” when the power supply is above 65% of the rated output voltage, or say, Power OK| Low

(0.5V max at 10mA)

The signal turns to be “High” when the power supply is under 65% of the rated output voltage, or say,

Power Fail

| High or open

(External applied voltage 10mA max.)

1500W Single Output Power Supply

Current Sharing with Remote Sense
RSP-1500 has the built-in active current sharing function and can be connected in parallel, up to 4 units, to provide higher output power as exhibited below :

The power supplies should be paralleled using short and large diameter wiring and then connected to the load.
Difference of output voltages among parallel units should be less than 0.2V.
The total output current must not exceed the value determined by the following equation: Maximum output current at parallel operation=(Rated current per unit) (Number of unit)××0.9

MEAN-WELL-RSP-1500-1500W-Single-Output-Power-Supply-
FIG-11

Mechanical Specification

MEAN-WELL-RSP-1500-1500W-Single-Output-Power-Supply-
FIG-13

CN1 and CN2 are connected internally.

Pin No.	Function	Description
1	RCG	Remote ON-OFF Ground
2	RC2	Remote ON-OFF
3,5,7	-S	Negative sensing for remote sense
4	TRIM	Connection for output voltage programming
6	LS(Current Share)	Current Share
8	+S	Postive sensing for remote sense