FENTON 178.332 Sputnik 2 LED Party Speaker Instruction Manual

: June 8, 2024
: FENTON

Table of Contents

178.332 Sputnik 2 LED Party Speaker
UNPACKING INSTRUCTION
POWERSUPPLY
GENERAL
STEREO PAIRING
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SPUTNIK 2 Party Speaker
Ref. nr.: 178.332
Instruction Manual FENTON 178 332 Sputnik 2 LED Party
Speaker

178.332 Sputnik 2 LED Party Speaker

Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.

Prior to using the unit, please ask advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The unit contains voltage carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
The unit is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the unit from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the unit with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer.
To avoid fire and shock hazard, do not expose the unit to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the unit to an earthed mains outlet (220240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
Do not repeatedly switch the fixture on and off. This shortens the life time.
Keep the unit out of the reach of children. Do not leave the unit unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.
If this product have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
Keep the original packing material so that you can transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWERSUPPLY

On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate electrical ground to avoid the risk of electrocution or fire.

GENERAL

MODE / STEREO PAIR
Press repeatedly to switch between USB, microSD, AUX and BT modes. Hold for 3 seconds to initiate stereo pairing with another Sputnik speaker.
SPEAKER PHONE
In BT mode, short press to answer the phone; long press to reject the phone and hang up when there is an incoming call.
PREVIOUS/VOLUME-
Press to play the previous music track or previous radio station.
Hold to lower the volume level.
SCAN / PLAY/PAUSE / LED
• In FM mode, press to start autoscan. The available FM channels will be saved to preset memory positions.
• Press to pause playback of a music track, press again to resume playback.
• Press above 3 seconds for all light to be on or off.
NEXT /VOLUME+
Short press to play the next music track or next radio station.
Hold to increase the volume level.
ON/OFF
Dial “ON” to turn on the unit. Dial “OFF” to turn off the unit.
CHARGING INPUT
DC 5V MicroUSB input for battery charging.
USB INPUT
Connect your USB devices to this slot to play music with MP3-format on USB mode.
MICROSD INPUT
Add a microSD card to this socket to play back music on the card.
AUX INPUT
3.5mm jack connector for input from mobile phone, tablet, PC etc.

BT CONNECTION
Place the speaker within 10 metres of the BT enabled device. Press the mode button until you are in BT mode. Then use your mobile or other BT device and search the speaker. The BT name for this speaker is “Sputnik02”.

STEREO PAIRING

The Sputnik features a stereo pairing function. This means you can purchase 2 identical Sputnik speakers and connect them to play in stereo wirelessly. Step 1: set up a BT connection with speaker 1. Step 2: set speaker 2 to BT mode. Step 3: hold the MODE / STEREO PAIR button on speaker 1 for 3 seconds. When pairing is successful, you’ll hear a chime from the second speaker.

TECHNICAL SPECIFICATION

Playback options : BT streaming, FM radio, MicroSD, USB
Input connections : 3.5mm jack, MicroSD, USB
Output power: Max : 60W
Diameter tweeter: 1”
Diameter woofer: 3”
Magnet type: Ferrite
Battery: 3.7V – 1.5Ah
Power supply: 5V via USB
Dimensions (LxWxH) : 226 x 111 x 134mm
Weight : 1.00
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
The products referred to in this manual conform to the European Community Directives to which they are subject: