ONFORU A SPEAKER07 RGB Wireless Speaker Instruction Manual

: June 5, 2024
: ONFORU

Table of Contents

SAFETY INFORMATION
PACKAGE CONTENTS
PARAMETER
PRODUCT DESCRIPTION
TWS PAIRING
BLUETOOTH MODES
MICRO USB CHARGING PORT
AUX INPUT MODE
SOLUTIONS TO COMMON PROBLEMS
Documents / Resources

A SPEAKER07 RGB Wireless Speaker
Instruction Manual

MODEL: A SPEAKER07
RGB

SAFETY INFORMATION

Please read the instruction carefully before use and use it according to the instruction. After reading, please keep it properly for future reference.

Please use a 5V adapter for charging.
Do not hit the product seriously to avoid damaging the product.
The product has a built-in lithium battery, please keep it away from direct light or heating appliances.
Please do not disassemble, repair or modify the product by yourself.
Do not get close to magnetic fields or electric fields.

PACKAGE CONTENTS

Speaker 2
User Manual 1
USB Cable 1
AUX Cable 1

PARAMETER

| 182 x 182 x 268 mm / 7.16 x 7.16 x 10.55 in
---|---
| 1.36 kg / 2.99 lb
| DC 5V/2A
| V5.0
| 7.4V / 2 x 2600mAh
| 15m Max

PRODUCT DESCRIPTION

268mm/10.55in

TWS pairing button: Long press for 2 seconds to enter TWS pairing state, long press for 2 seconds again to cancel TWS pairing state. After TWS is paired, it will be memorized and automatically aired the next time when it is switched on. Quickly double-click to enter the Bluetooth mandatory pairing state.
Light modes switch button: When the machine is turned on, the red light is always on by default. If you short press the light button, it will display in order: yellow light always on/green light always n/blue light always on/purple light always on/pink light always on/white light always on， Only when playing music: Rhythm (red light, yellow light, green light, blue light, purple light, pink light, white light switch in turn, switch lights in turn every 5 seconds) / / turn off the light. (Note: the light will not flash when there is no music) Long press for two seconds to turn off the light.
Volume Down / Previous Song: Long press ” – ” to reduce volume; Short press ” – ” to switch back to the previous song.
Volume UP / Next Song: Long press ” + ” to increase volume. Short press ” + ” to move to the next song.
Power on/off/play/pause button: Long press for 2 seconds to turn on the device and they will automatically enter the Bluetooth pairing state; long press for 2 seconds again to power off. Short press for play and pause.
Indicator light: The blue light flashes quickly during Bluetooth pairing, and it stays on after pairing is successful. When playing music the blue light will flash slowly, and it stays on when the AUX N tate is on. The red light will stay on when charging, and goes off when it is fully charged.
Audio jack
USB jack
LED RGB light

TWS PAIRING

TWS interconnection: Switch on the two speakers at the same time, the two speakers will be paired and connected with each other. After successful pairing, the blue light of the main engine will flash lowly, and the blue light of the secondary engine will always light (with the prompt tone).
Disconnect the TWS connection: After the two speakers are successfully connected, continue to press and hold the “ ” button on any one of the speakers for 2 seconds to disconnect (with the prompt tone).
Note: The best distance between the two speakers should be controlled between 5-8M. If the range is too large or too small, the information transmission between the speakers will be affected.

BLUETOOTH MODES

Hold the “ ” to turn the speaker on. The speaker will automatically enter Bluetooth mode by default. You will hear the prompt tone and the blue indicator light will flash quickly.
The first time that you pair the speakers and your device, you should turn your device’s Bluetooth function on and search for the speaker. The device will display the speaker’s name “A PEAKER07”. Tap the speaker’s name and it will automatically pair with your device. After successfully pairing, the speaker will beep and the indicator light will stay blue.
When the speaker and your device have been successfully paired, you can play music through your device and control the music through the speaker. If you want to connect a different device with this speaker, short press “ ” 2 times to cut the present Bluetooth connection. And then follow the above 2 steps to enter Bluetooth pairing mode.

MICRO USB CHARGING PORT

Please charge the speakers with the supplied micro USB charging cable and use the DC power adapter that is less than 5V.
When the speaker’s battery is low, you will see the red indicator light is flashing and the speaker will automatically shut down. Use the supplied USB cable to charge it. While the speaker is charging, you ill see a red indicator light. Once the speaker is fully charged, the indicator light will turn blue.

AUX INPUT MODE

If your device is not Bluetooth-enabled, easily connect with TV or other devices via this 3.5 mm audio cable.
NOTE

When you turn on the speaker, it will automatically search for the device connected recently. If the Bluetooth of the device is activated, the speaker will automatically connect and pair. After successfully pairing, you will hear a beep sound.
Bluetooth has an effective communication range of 15 meters. Make sure there are no large obstructions within this range. To ensure a stable connection, it’s best to use the speaker within 5 meters of your device.
The speaker will automatically turn off in 30 minutes if there is no Bluetooth connection or no music played.

SOLUTIONS TO COMMON PROBLEMS

Problemas	Solutions
Multiple attempts to connect but failed	1. Check if the product is in search

status or restart it.
2. There are too many peripheral Bluetooth devices, making searching difficult, you should turn off other Bluetooth devices.
The sound is low or
distorted| 1. Check the volume of the Bluetooth device and adjust its volume to a suitable position.
2. Please charge the speaker if the battery voltage is low.
The sound is not
continuous| Check whether the distance between the speaker and the Bluetooth device exceeds the effective audio connection distance, or if there is an obstacle between them.
Bluetooth status
indicator does not
light| 1. The battery is low, please try again after the speaker is fully charged.
2. There are too many peripheral Bluetooth devices, making searching difficult, you should turn off other Bluetooth devices.
3. Check if the product is in search status, or restart it.

WARM TIPS

In order to prolong the lifespan of the speaker and protect your physical and mental health, please do not listen to music in a long-term and loud environment, so as not to damage your hearing.

Manufacturer
Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si
Address: Qian wan Yi lu 1 hao A dong 201 shi Qian hai shen gang he Zuo Qu Shen Zhen, Guang
Dong, 518000, CN
support@onforuled.com
www.onforuleds.com
EU REP MDH LIGHTING LTD
Suite 302, 292 Strovolos Avenue, 2048 Strovolos
Nicosia, Cyprus
support@onforuled.com
UK REP MDH LIGHTING LTD
UNIT G25 WATERFRONT STUDIOS 1 DOCK ROAD
LONDON UNITED KINGDOM E16 1AH
support@onforuled.com
Made in China

Documents / Resources

| ONFORU A SPEAKER07 RGB Wireless Speaker [pdf] Instruction Manual
A SPEAKER07 RGB, Wireless Speaker, A SPEAKER07 RGB Wireless Speaker, Speaker
---|---