CAL-ROYAL CR33641 CARPET SPECIAL PURPOSE THRESHOLD User Manual
- June 5, 2024
- CAL-ROYAL
Table of Contents
CAL-ROYAL CR33641 CARPET SPECIAL PURPOSE THRESHOLD
FINISH: MILL FINISH ALUMINUM
OVERVIEW
- 7/16” H x 4” W
- 11.1 mm x 101.6 mm
- FASTENERS: #10x 1-1/2″ VwS
INSTALLATION INSTRUCTIONS
- Measure the width at the bottom of the frame and cut the threshold to the exact full width of the opening.
- If necessary trim and notch the threshold ends to accommodate the side jamb stops.
- Mark and drill pilot holes through the pre-drilled holes in the threshold and fastens them with the screws provided.
- Seal both ends and along the sides of the threshold.
- Operate the door multiple times to ensure proper adjustment so as not to prevent the door from self-closing and latching.
MATERIAL FOR USE IN LISTED STEEL FRAMES AND CLASSIFIED HOLLOW METAL STEEL COMPOSITE TYPE FIRE DoORS ARE RATED UP TO AND INCLUDING 3 HOURS, WOOD COMPOSITE TYPE FIRE DOORS ARE RATED UP TO AND INCLUDING 1-1/2 HOURS AND WOOD CORE FIRE DOORS ARE RATED 20 MINUTES WITHOUT HOSE STREAM.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>