Hunter Douglas PowerView Gen 3 Series Gateway User Guide
- June 5, 2024
- Hunter Douglas
Table of Contents
PowerView ® Gen 3 Gateway
QUICK START GUIDE
A view of your PowerView ® Gen 3 Gateway or Gateway Pro
Step 1:
Plug in your PowerView ® Gen 3 Gateway or Gateway Pro using the provided USB
power cable and power adapter. (Optional) Gateway Pro Only: Apply power by
using Power over Ethernet (PoE).
Step 2:
Download the PowerView ® App from Google Play or the App Store. To download,
go to www.hdpvapp.com or scan this QR code:
PowerViewhttp://www.hdpvapp.com
Step 3:
Open the PowerView ® App and follow the on-screen instructions to finish the
setup process. To add a gateway to an existing project, navigate to More >
Accessories > Gateways in the PowerView App and follow the on-screen
instructions.
This equipment should be installed and operated with a minimum distance 20cm
separation from the user.
This device complies with Industry Canada’s license-exempt RSS. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003.
• Operation is subject to the following two conditions: (1) this device may
not cause harmful interference and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio requency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that nterference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/tv technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions:
- this device may not cause harmful interference and
- this device must accept any interference received, including interference that may cause undesired operation.
CE Statement
Hunter Douglas Window Fashions, One Duette Way, Broomfield, CO 80020, USA
Hunter Douglas hereby declares that the PowerView ®
Remote Control is in compliance with the essential requirements and other
relevant provisions of the Electromagnetic Compatibility (EMC) Directive
2014/30/EU and Radio Equipment Directive (RED) 2014/53/EU. A copy of the Doc
can be obtained online:
www.hunterdouglas.com/RFcertifications.
Rev A
© 2022 Hunter Douglas. All rights reserved. All trademarks used herein are the
property of Hunter Douglas or their respective owners. 7/22
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>