Hunter Douglas Architectural 2 Inch 008 Gauge Aluminum Metal Blinds Instructions
- September 27, 2024
- Hunter Douglas Architectural
Table of Contents
2 Inch 008 Gauge Aluminum Metal Blinds
“`html
Product Information
Specifications
-
Material: Aluminum
-
Gauge: 0.008
-
Includes various parts such as end lock, tape drum, tilt rod,
etc. -
Optional spacer blocks may be included
Product Usage Instructions
Installation
-
Assemble the necessary parts including end lock, tape drum,
tilt rod, etc. -
Mount the box installation bracket securely on the desired
window frame. -
Attach the headrail to the box installation bracket.
-
Securely install the bottom rail using the bottom rail end
caps. -
Adjust the slats to the desired height and secure them in place
using the lift spool.
Operation
-
Control the tilt of the blinds using the wand tilter or V tilt
rod. -
Raise or lower the blinds by pulling or releasing the lift
cord. -
Use the button set to lock the blinds in position when
desired.
Maintenance
Regularly dust the blinds with a soft cloth or vacuum brush
attachment to keep them clean. Avoid using harsh chemicals that may
damage the aluminum material.
FAQ
Q: Are spacer blocks necessary for installation?
A: Spacer blocks are optional and may not be required for every
blind. They can be used to provide additional support if
needed.
Q: How do I adjust the tilt of the blinds?
A: You can adjust the tilt of the blinds using either the wand
tilter or V tilt rod, depending on the specific model of blinds you
have.
“`
Riviera® Commercial Aluminum Horizontal Blinds
2″ .008 Gauge Aluminum Metal Blinds
STANDARD PARTS
1. End Lock 2. Tape Drum 3. Tilt Rod 4. Tape Drum Support 5.Wand Tilter 6.Box
Installation Bracket 7. Clear Wands 8. Cable Tape Ladder 9. Cord 10. Filler
Strip
11. Support and Cover Set 12. Lock Assembly with screws 13. Motor 14. Bottomrail 15. Bottomrail End Caps 16. Hold Down Brackets 17. Button Set 18. Valance Clips 19. Single Channel Valance 20. Slat
21. Headrail 22. End Lock 23. Spacer Blocks 24. “V” Tilt Rod 25.Lift Spool
26.Intermediate Support Bracket 27. Not Shown:Installation Screws (# 6 x 1.5″)
Not required on every blind