Hunter Douglas Riviera Commercial Aluminum Horizontal Blinds Owner’s Manual
- June 5, 2024
- Hunter Douglas
Table of Contents
Hunter Douglas Riviera Commercial Aluminum Horizontal Blinds
WHY CHOOSE ALUMINUM HORIZONTAL BLINDS?
With attractive design and resilient construction with good value, Aluminum Horizontal Blinds are available in automated and manual cordless options, ideal for larger-size commercial projects. Riviera® Commercial Aluminum Horizontal Blinds HDarchitectural.com 800.727.8953 Explore 46 color ways available in 1” blinds and 20 color ways in 2” blinds.
KEY FEATURES
- Cordless
- Cost Effective
- Easy to Clean
- GREENGUARD® Certified
- Manual and Automated Systems
- Backed by our Lifetime Guarantee
Color Options
1” .008 Gauge Aluminum Metal Blinds
STANDARD PARTS
- 3/8” Spacer Block*
- Tape Drum
- Tilt Rod
- Tape Drum Support
- Headrail
- Headrail End Cap
- Wand Tilter
- Tape Spacer
- Wand Extender
- Clear Wands
- Slat
- Cable Tape Ladder
- Support Set (Spool Cover) (Part#
- Cord
- Assembly with screws
- Motor
- Steel V Shaft
- Aluminum Filler Strip
- Bottomrail
- Bottomrail End Cap
- Button Set
- Valance Clip
- Double Slat Channel Valance
- Hidden Installation Brackets
- Box Installation Brackets (Optional)
- Hold Down Brackets
- End Lock (ordered with Box Brackets)
- Not Shown: Installation Screw (# 6 x 1.5”)
2” .008 Gauge Aluminum Metal Blinds
- End Lock
- Tape Drum
- Tilt Rod
- Tape Drum Support
- Wand Tilter
- Box Installation Bracket
- lear Wands
- Cable Tape Ladder
- Cord
- Filler Strip
- Support and Cover Set
- Lock Assembly with screws
- Motor
- Bottomrail
- Bottomrail End Caps
- Hold Down Brackets
- Button Set
- Valance Clips
- Single Channel Valance
- Slat
- Headrail
- End Lock
- Spacer Blocks*
- “V” Tilt Rod
- Lift Spool
- Intermediate Support Bracket
- Not Shown:Installation Screws (# 6 x 1.5”)
1” Aluminum Metal Blinds Product Specifications
PART 1 – GENERAL
- SUMMARY
- a. Section Includes:
- b. Hunter Douglas Architectural Riviera Commercial 1 Inch Aluminum Horizontal Blind
- REFERENCES
- a. FLAME-RESISTANT MATERIALS SHALL PASS OR EXCEED ONE OR MORE OF THE FOLLOWING TESTS:
- National Fire Protection Association (NFPA) 701 (small scale for horizontal applications)
- Department of Transportation Motor Vehicle Safety Standard 302 Flammability of Interior Materials
- California Administrative Code Title 19
- Federal Standard 191 Method 5903 (used by Port Authority of New York and New Jersey for drapery, curtain, and upholstery material)
- Boston Fire Department Test BFD IX-1
- New York State Uniform Fire Prevention and Building Code
- b. GREENGUARD Gold Certified
- QUALITY ASSURANCE
- a. SUPPLIER: Manufacturer, subsidiary or licensed agent shall be approved to supply the products specified, and to honor any claims against product presented in accordance with warranty
- b. INSTALLER: Installer or agent shall be qualified to install specified products by prior experience, demonstrated performance and acceptance of requirements of manufacturer, subsidiary, or licensed agent. Installer shall be responsible for an acceptable installation.
- UNIFORMITY : Provide 1 inch Horizontal Aluminum Blinds of only one manufacturer for entire project.
- DELIVERY, STORAGE AND HANDLING:
- a. Product shall be delivered to site in manufactuer’s original packaging.
- b. Product shall be handled and stored to prevent damage to materials, finishes and operating mechanisms.
- JOB CONDITIONS:
- a. Prior to shade installation, building shall be enclosed.
- b. Interior temperature shall be maintained between 60°F. and 90° F. during and after installation; relative humidity shall not exceed 80%. Wet work shall be complete and dry.
- SHOP DRAWINGS:
- a. Show fabrication and installation details for window treatments.
- SAMPLES FOR SELECTION:
- a. For each color and texture specified, submit 2 sets of samples representing manufacturer’s standard range of finishes for aluminum slats at 6 inches (152 mm) long.
- b. Include Samples of accessories involving color selection.
- c. Window treatments Schedule: Use same designations indicated on Drawings.
- INFORMATIONAL SUBMITTALS
- a. PRODUCT DATA: Manufacturer’s descriptive literature shall be submitted indicating materials, finishes, construction and installation instructions and verifying that product meets requirements specified. Manufacturer’s recommendations for maintenance and cleaning shall be included.
- b. DRAWINGS AND DIAGRAMS: Wiring diagrams of any motorized components or units, working and assembly drawings shall be supplied as requested.
- c. SAMPLE: Responsible contracting officer or agent shall supply one sample shade of each type specified in this contract for approval. Supplied units shall be furnished complete with all required components, mounting and associated hardware, instructions and warranty.
- d. QUALIFICATION DATA: For Installer.
- e. PRODUCT CERTIFICATES: For each type of window treatments, signed by product manufacturer.
- f. PRODUCT TEST REPORTS: For each type of window treatments, for tests performed by [manufacturer and witnessed by a qualified testing agency] [a qualified testing agency].
- CLOSEOUT SUBMITTALS
- a. Maintenance Data: For window treatments to include in maintenance manuals.
- b. Sample warranty document
- MAINTENANCE MATERIAL SUBMITTALS
- a. Furnish extra materials that match products installed and that are packaged with protective covering for storage and identified with labels describing contents.
PART 2 – PRODUCTS
-
ACCEPTABLE MANUFACTURER
-
A. Hunter Douglas Architectural / 9900 Gidley, CA 91731 / Phone: 800-727-8953 Fax: 800-205-9819/
Website:HunterDouglasArchitectural.com. -
B. Product substitutions must be approved by architect minimum of 30 days prior to close of bid.
-
-
PRODUCT : Riviera Commercial 1 Inch Aluminum Horizontal Blind
- A. MATERIALS: Steel headrail and aluminum blind
- B. SIZE SPECIFICATIONS:
- Width: Minimum 10-1/2 inches to maximum 120 inches, 144 inches with 2 on one headrail
- Height: Minimum 12 inches to maximum 84 inches
- C. SLATS: 1 inch .008 gauge aluminum slat in dust resistant finish
- D. SLAT SUPPORT: 1.4mm Corded, braided ladder at 22mm spacing
- E. HEADRAIL: Integrated valance, curved steel at 1.376 inch wide by 1.375 inch depth, 0.024 gauge
- F. VALANCE: Optional 2 slat channel valance
- G. BOTTOM RAIL: 1-1/2 inch wide by 1-1/8 inch high steel bottom rail with end cap, optional hold downs
- H. LIFTING MECHANISM: Cordless lift with balanced spring motor
- I. TILTING MECHANISM: Wand tilt
- J. TILT CONTROL WAND: Standard clear wand in control positions [left, right] at heights [12, 20, 30, 40, 50, 60, 70, 78 or 90] inches
- K. MOUNTING HARDWARE:
-
1. Box Bracket dimension 1-1/2 inch height by 1-1/4 inch depth. Support brackets as required by blind width.
- Hidden Brackets optional
- L. FABRICATION:
- Outside Mount: 0 inch deduction from headrail, 0 inch deduction from blind width
- Inside Mount: ½ inch deduction from headrail, ½ inch deduction from blind width
- M. FINISHES
- N. SLAT finish selection from standard selection
- O. SLAT SUPPORT braided ladders shall be color coordinated with slat
-
INSPECTION:
- A. SUBCONTRACTOR shall be responsible for inspection on-site, approval of mounting surfaces, installation conditions and field measurement for this work.
- B. OTHER INTERACTING TRADES shall receive drawings of shade systems, dimensions, assembly and installation methods from subcontractor upon request.
-
INSTALLATION
- A. Minimum depth for inside mount is 7/8 inch with hidden bracket and 1” with box bracket.
- B. Install product level, plumb and aligned with adjacent units per installation instructions
- C. Provide final installation conditions to ensure product is without damage at the time of substantial completion in a dust-free environment
End of Section 12492.
2” Aluminum Horizontal Blinds Product Specifications
Commercial Window Treatment Specification
Division 12-Furnishings
Section 12492- Hunter Douglas Architectural Riviera Commercial 2 Inch Aluminum
Horizontal Blind
PART 1 – GENERAL
- SUMMARY
- a. Section Includes:
- b. Hunter Douglas Architectural Riviera Commercial 2 Inch Aluminum Horizontal Blind
- REFERENCES
- a. FLAME-RESISTANT MATERIALS SHALL PASS OR EXCEED ONE OR MORE OF THE FOLLOWING TESTS:
- i. National Fire Protection Association (NFPA) 701 (small scale for horizontal applications)
- ii. Department of Transportation Motor Vehicle Safety Standard 302 Flammability of Interior Materials
- iii. California Administrative Code Title 19
- iv. Federal Standard 191 Method 5903 (used by Port Authority of New York and New Jersey for drapery, curtain, and upholstery material)
- v. Boston Fire Department Test BFD IX-1
- vi. New York State Uniform Fire Prevention and Building Code
- b. GREENGUARD Gold Certified
- QUALITY ASSURANCE
- a. SUPPLIER: Manufacturer, subsidiary or licensed agent shall be approved to supply the products specified, and to honor any claims against product presented in accordance with warranty
- b. INSTALLER: Installer or agent shall be qualified to install specified products by prior experience, demonstrated performance and acceptance of requirements of manufacturer, subsidiary, or licensed agent. Installer shall be responsible for an acceptable installation.
- UNIFORMITY : Provide 2 inch Horizontal Aluminum Blinds of only one manufacturer for entire project.
- DELIVERY, STORAGE AND HANDLING:
- a. Product shall be delivered to site in manufactuer’s original packaging.
- b. Product shall be handled and stored to prevent damage to materials, finishes and operating mechanisms.
- JOB CONDITIONS:
- a. Prior to shade installation, building shall be enclosed.
- b. Interior temperature shall be maintained between 60°F. and 90° F. during and after installation; relative humidity shall not exceed 80%. Wet work shall be complete and dry.
- SHOP DRAWINGS:
- a. Show fabrication and installation details for window treatments.
- SAMPLES FOR SELECTION:
- a. For each color and texture specified, submit 2 sets of samples representing manufacturer’s standard range of finishes for aluminum slats at 6 inches (152 mm) long.
- b. Include Samples of accessories involving color selection.
- c. Window treatments Schedule: Use same designations indicated on Drawings.
- INFORMATIONAL SUBMITTALS
- a. PRODUCT DATA: Manufacturer’s descriptive literature shall be submitted indicating materials, finishes, construction and installation instructions and verifying that product meets requirements specified. Manufacturer’s recommendations for maintenance and cleaning shall be included.
- b. DRAWINGS AND DIAGRAMS: Wiring diagrams of any motorized components or units, working and assembly drawings shall be supplied as requested.
- c. SAMPLE: Responsible contracting officer or agent shall supply one sample shade of each type specified in this contract for approval. Supplied units shall be furnished complete with all required components, mounting and associated hardware, instructions and warranty.
- d. QUALIFICATION DATA: For Installer.
- e. PRODUCT CERTIFICATES: For each type of window treatments, signed by product manufacturer.
- f. PRODUCT TEST REPORTS: For each type of window treatments, for tests performed by [manufacturer and witnessed by a qualified testing agency] [a qualified testing agency].
- CLOSEOUT SUBMITTALS
- a. Maintenance Data: For window treatments to include in maintenance manuals.
- b. Sample warranty document
- MAINTENANCE MATERIAL SUBMITTALS
- a. Furnish extra materials that match products installed and that are packaged with protective covering for storage and identified with labels describing contents.
PART 2 – PRODUCTS
-
ACCEPTABLE MANUFACTURER
-
A. Hunter Douglas Architectural / 9900 Gidley, CA 91731 / Phone: 800-727-8953 Fax: 800-205-9819/
Website: HunterDouglasArchitectural.com. -
B. Product substitutions must be approved by architect minimum of 30 days prior to close of bid.
-
-
PRODUCT : Riviera Commercial 2 Inch Aluminum Horizontal Blind
- A. MATERIALS: Steel headrail and aluminum blind
- B. SIZE SPECIFICATIONS:
- i. Width: Minimum 10-1/2 inches to maximum 120 inches, 144 inches with 2 on one headrail
- ii. Height: Minimum 12 inches to maximum 84 inches
- C. SLATS: 2 inch .008 gauge aluminum slat in dust resistant finish
- D. SLAT SUPPORT: 1.4mm Corded, braided ladder at 44 mm spacing
- E. HEADRAIL: Square steel head rail at 2.25 inch wide by 1.5 inch depth, 0.024 gauge
- F. VALANCE: Optional 2 slat channel valance
- G. BOTTOM RAIL: 1-1/2 inch wide by 1-1/8 inch high steel bottom rail with end cap, optional hold downs
- H. LIFTING MECHANISM: Cordless lift with balanced spring motor
- I. TILTING MECHANISM: Wand tilt
- J. TILT CONTROL WAND: Standard clear wand in control positions [left, right] at heights [12, 20, 24, 36, 48, 60, 72, or 84] inches
- K. MOUNTING HARDWARE:
- i. Box Bracket dimension 1-1/2 inch height by 1-1/4 inch depth. Support brackets as required by blind width.
- ii. Hidden Brackets optional
- L. FABRICATION:
- i. Outside Mount: 1/4 inch deduction from headrail, 0 inch deduction from blind width
- ii. Inside Mount: 3/4 inch deduction from headrail, ½ inch deduction from blind width
- M. FINISHES
- N. SLAT finish selection from standard selection
- O. SLAT SUPPORT braided ladders shall be color coordinated with slat
-
INSPECTION :
- A. SUBCONTRACTOR shall be responsible for inspection on-site, approval of mounting surfaces, installation conditions and field measurement for this work.
- B. OTHER INTERACTING TRADES shall receive drawings of shade systems, dimensions, assembly and installation methods from subcontractor upon request.
-
INSTALLATION
- A. Minimum depth for inside mount is 7/8 inch with hidden bracket and 1” with box bracket.
- B. Install product level, plumb and aligned with adjacent units per installation instructions
- C. Provide final installation conditions to ensure product is without damage at the time of substantial completion in a dust-free environment.
References
- Hunter Douglas Commercial and Architectural products on HunterDouglasArchitectural.com
- Hunter Douglas Commercial and Architectural products on HunterDouglasArchitectural.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>