Hunter Douglas SD053 Alternative Wood Blinds User Guide
- May 15, 2024
- Hunter Douglas
Table of Contents
Hunter Douglas SD053 Alternative Wood Blinds User Guide
Express Basics
2″ FAUX
Lily| SD053| Textured Lily| PM054
Gravel| SD046| Pecan Pie| PM036
Greek Villa| SD130| Walnut Grove| PM035
CHARACTERISTICS OF FAUX WOOD BLINDS
Faux wood blinds are an excellent and economical alternative to wood blinds for many applications and offer a long lasting performance. A durable engineered polymer material is used for all colors.
Faux wood blinds are not intended for installation near heat sources such as radiators, heat registers, and space heaters which can potentially compromise the integrity of the faux wood material. Airflow through the blind is also very important. Keeping slats closed for long periods of time and/ or using additional window treatments in front of or behind blinds can significantly increase the temperature the blinds are exposed to. These high temperatures (above 140°F / 60°C) may cause the slats to warp or twist.
// Express Basics Faux Wood Blinds – 2″
PRODUCT SPECIFICATIONS
FEATURES
- Cordless Operation
- Wand Tilt – Left Side
- Only Low Profile PVC Headrail (Steel reinforced over 60″ wide)
- Lights Out Route less Feature
NO CHARGE OPTIONS
- 2-1/2″ Crescent Valance
- Hold-Down Brackets (Plastic)
- Center Supports included
- Continuous Valance
- Spacer Blocks (3/8″)
BOTTOM RAIL SIZE: 2” X 3/4”
Bottom Rail
End Cap
SIZE SPECIFICATIONS
Minimum Wad)| 012
Maximum Wad)| 452
Minimum Heir/)| 012
Maximum Heir/)| 132
*Blinds are built with a height tolerance, therefore extra slats may rest on the bottom rail.
VALANCE ORDERING
Outside Mount| 1″ Added to valance, measured inside returns
Inside Mount| -1/8″ (no returns)
Max Un-Spliced| 102″
Max Spliced| 168″
NOTE: Valances are cut to measure inside miter to ensure the most
accurate fit when installed over the headrail or window frame
STANDARD RETURNS
Inside Mount| 1/2″
Outside Mount| 3″
2-1/2” CRESCENT VALANCE
Mitered Corner
Corner Cap
Valance Clip
- Height: 2-1/2″ Depth: 3/8″
- Standard with blind
- Returns are available with miter cuts that attach with hidden connectors or straight cuts that attach with visible corner caps
- Attaches with hidden, adjustable valance clip
Dimansation
INSTALLATION BRACKETS
Blind Width| Box Brackets| Support Brackets*
Below 30″| 2| 0
30″ – 48″| 2| 1
38-1/8″ – 72″| 2| 2
72-1/8″ – 84″| 2| 3
72-1/8″ – 84″| 2| 3
84-1/8″ – 96″| 2| 4
| |
• Support brackets are evenly spaced along length of headrail
FINISHED DIMENSIONS
| Inside Mount| Outside Mount
Headrail| -1/2″| -1/2″
Blind Width| -1/2″| 0″
Valance| -1/8″| +1″
Do NOT make any deductions from your measurements
PRODUCT SPECIFICATIONS
MOUNTING DEPTH & REQUIREMENTS
He+ri-| **H e * +r* i – PR/ 0
e 1 tt 2 3 4 5| **He+ri- 6-72h 385|
****9 * –* : 1 e 6-72h 3;5
---|---|---|---
Height| ( e )tph
1″1#2%| 2″%| &#)%| 2″1#2%| &”1#2%
STACKING CHART
Blind Height| Stack Height
24″| 3-3/4″
36″| 4-5/8″
42″| 5″
48″| 5-1/4″
54″| 5-3/4″
60″| 6″
66″| 6-1/2″
72″| 6-3/4″
84″| 7-1/2″
• Height includes headrail
LADDER PLACEMENT CHART
Blind Width (Net)| Number of Ladders
Gravel, Pecan Pie and Walnut Grove| Lily, Greek Villa and Textured Lily
18″ – 24″| 2| 2
24-1/8″ – 36″| 3| 3
36-1/8″ – 48″| 4| 4
48-1/8″ – 54″| 5| 5
54-1/8″ – 60″| 6| 5
60-1/8″ – 66″| 5| 6
66-1/8″ – 72″| 6| 6
72-1/8″ – 78″| 6| 7
78-1/8″ – 84″| 8| 7
84-1/8″ – 96″| 8| 8
NOTE : Since this product has varying ladder spacing between colors, the spacing may differ slightly from color to color.
WAND SIZING
Blind length less than or equal to 72″:| 24″ Wand
Blind length greater than 72″| 36″ Wand
If blind width < 36″ AND blind length > 72″ :| 36″ Wand (2-piece)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>